Re: [PATCH 5/5] arm64: dts: msm8996: Add QFPROM node

[Vivek Gautam]

Hi Bjorn,


On Tue, Jul 25, 2017 at 11:17 AM, Bjorn Andersson
<bjorn.andersson@xxxxxxxxxx> wrote:
> From: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
>
> Signed-off-by: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/msm8996.dtsi | 11 +++++++++++
>  1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> index 395666dcce1b..d0865d2f731e 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> @@ -496,6 +496,17 @@
>                         status = "disabled";
>                 };
>
> +               qfprom: qfprom@74000 {
> +                       compatible = "qcom,qfprom";
> +                       reg = <0x00074000 0x8ff>;
> +                       #address-cells = <1>;
> +                       #size-cells = <1>;
> +                       qusb2p_hstx_trim: hstx_trim@24e {
> +                               reg = <0x24e 0x2>;
> +                               bits = <5 4>;
> +                       };

There's one more part to it which will be used by the secondary
USB2 controller.
I was hoping to add this patch along with the USB device tree patches.
Let me know if you are not using this patch for anything now, i can
submit it along with the usb series.

Regards
Vivek

> +               };
> +
>                 sdhc2: sdhci@74a4900 {
>                          status = "disabled";
>                          compatible = "qcom,sdhci-msm-v4";
> --
> 2.12.0
>



-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project