Re: [PATCH v4 4/7] phy: qcom-qmp: Add support for IPQ8074
From: Vivek Gautam
Date: Wed Jul 26 2017 - 11:31:50 EST
On 07/21/2017 05:06 PM, Varadarajan Narayanan wrote:
Add definitions required to enable QMP phy support for IPQ8074.
Signed-off-by: smuthayy <smuthayy@xxxxxxxxxxxxxx>
Signed-off-by: Varadarajan Narayanan <varada@xxxxxxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 124 ++++++++++++++++++++++++++++++++++++
1 file changed, 124 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index b046866..ec277fd 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -59,6 +59,7 @@
#define QSERDES_COM_PLL_RCTRL_MODE1 0x088
#define QSERDES_COM_PLL_CCTRL_MODE0 0x090
#define QSERDES_COM_PLL_CCTRL_MODE1 0x094
+#define QSERDES_COM_BIAS_EN_CTRL_BY_PSM 0x0a8
#define QSERDES_COM_SYSCLK_EN_SEL 0x0ac
#define QSERDES_COM_RESETSM_CNTRL 0x0b4
#define QSERDES_COM_RESTRIM_CTRL 0x0bc
@@ -143,6 +144,11 @@
#define QPHY_LOCK_DETECT_CONFIG3 0x88
#define QPHY_PWRUP_RESET_DLY_TIME_AUXCLK 0xa0
#define QPHY_LP_WAKEUP_DLY_TIME_AUXCLK 0xa4
+#define QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB 0x1A8
+#define QPHY_OSC_DTCT_ACTIONS 0x1AC
+#define QPHY_RX_SIGDET_LVL 0x1D8
+#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB 0x1DC
+#define QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB 0x1E0
/* QPHY_SW_RESET bit */
#define SW_RESET BIT(0)
@@ -580,6 +586,121 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
.mask_pcs_ready = PHYSTATUS,
};
+static const struct qmp_phy_init_tbl ipq8074_pcie_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0xf),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_EN, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER1, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x6),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0xf),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORECLK_DIV, 0xa),
+ QMP_PHY_INIT_CFG(QSERDES_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0xa),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0xa),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x3),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0xD),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xD04),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x33),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x2),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_BUF_ENABLE, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0xb),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CTRL_BY_PSM, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_CTRL, 0xa),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x2),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_EP_DIV, 0x19),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x7),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+ QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x6),
+ QMP_PHY_INIT_CFG(QSERDES_TX_RES_CODE_LANE_OFFSET, 0x2),
+ QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x1),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x0),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xdb),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x4),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN_HALF, 0x4),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_pcie_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_ENDPOINT_REFCLK_DRIVE, 0x4),
+ QMP_PHY_INIT_CFG(QPHY_OSC_DTCT_ACTIONS, 0x0),
+ QMP_PHY_INIT_CFG(QPHY_PWRUP_RESET_DLY_TIME_AUXCLK, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB, 0x0),
+ QMP_PHY_INIT_CFG(QPHY_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_PLL_LOCK_CHK_DLY_TIME_AUXCLK_LSB, 0x0),
+ QMP_PHY_INIT_CFG(QPHY_LP_WAKEUP_DLY_TIME_AUXCLK, 0x40),
+ QMP_PHY_INIT_CFG_L(QPHY_PLL_LOCK_CHK_DLY_TIME, 0x73),
+ QMP_PHY_INIT_CFG(QPHY_RX_SIGDET_LVL, 0x99),
+ QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_TXDEEMPH_M3P5DB_V0, 0xe),
+ QMP_PHY_INIT_CFG_L(QPHY_SW_RESET, 0x0),
+ QMP_PHY_INIT_CFG_L(QPHY_START_CTRL, 0x3),
+};
+
+/* list of resets */
+static const char * const ipq8074_pciephy_reset_l[] = {
+ "phy", "phy_phy",
+};
Just a nit in this patch.
Can you arrange these data inline to how they are currently in the driver?
So please place the init tables along with other tables, and the reset and
other driver data also along side other such definitions.
Thanks
Regards
vivek
+
+static const struct qmp_phy_cfg ipq8074_pciephy_cfg = {
+ .type = PHY_TYPE_PCIE,
+ .nlanes = 1,
+
+ .serdes_tbl = ipq8074_pcie_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(ipq8074_pcie_serdes_tbl),
+ .tx_tbl = ipq8074_pcie_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(ipq8074_pcie_tx_tbl),
+ .rx_tbl = ipq8074_pcie_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(ipq8074_pcie_rx_tbl),
+ .pcs_tbl = ipq8074_pcie_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(ipq8074_pcie_pcs_tbl),
+ .clk_list = NULL,
+ .num_clks = 0,
+ .reset_list = ipq8074_pciephy_reset_l,
+ .num_resets = ARRAY_SIZE(ipq8074_pciephy_reset_l),
+ .vreg_list = NULL,
+ .num_vregs = 0,
+ .regs = pciephy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN | REFCLK_DRV_DSBL,
+ .mask_pcs_ready = PHYSTATUS,
+
+ .has_phy_com_ctrl = false,
+ .has_lane_rst = false,
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = 995, /* us */
+ .pwrdn_delay_max = 1005, /* us */
+};
+
static void qcom_qmp_phy_configure(void __iomem *base,
const unsigned int *regs,
const struct qmp_phy_init_tbl tbl[],
@@ -1042,6 +1163,9 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)
}, {
.compatible = "qcom,msm8996-qmp-usb3-phy",
.data = &msm8996_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,ipq8074-qmp-pcie-phy",
+ .data = &ipq8074_pciephy_cfg,
},
{ },
};
--
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project