Re: [PATCH v2 4/4] clk: meson: gxbb-aoclk: Add CEC 32k clock
From: Martin Blumenstingl
Date: Fri Jul 28 2017 - 06:30:15 EST
Hi Neil,
thanks for these patches, CEC support is another good step!
On Fri, Jul 28, 2017 at 11:53 AM, Neil Armstrong
<narmstrong@xxxxxxxxxxxx> wrote:
> The CEC 32K AO Clock is a dual divider with dual counter to provide a more
> precise 32768Hz clock for the CEC subsystem from the external xtal.
>
> Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
> ---
> drivers/clk/meson/Makefile | 2 +-
> drivers/clk/meson/gxbb-aoclk-32k.c | 180 +++++++++++++++++++++++++++++++++++++
> drivers/clk/meson/gxbb-aoclk.c | 21 ++++-
> drivers/clk/meson/gxbb-aoclk.h | 16 ++++
> 4 files changed, 217 insertions(+), 2 deletions(-)
> create mode 100644 drivers/clk/meson/gxbb-aoclk-32k.c
>
> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
> index de65427..b139d41 100644
> --- a/drivers/clk/meson/Makefile
> +++ b/drivers/clk/meson/Makefile
> @@ -4,4 +4,4 @@
>
> obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-cpu.o clk-mpll.o clk-audio-divider.o
> obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
> -obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-regmap.o
> +obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-regmap.o gxbb-aoclk-32k.o
> diff --git a/drivers/clk/meson/gxbb-aoclk-32k.c b/drivers/clk/meson/gxbb-aoclk-32k.c
> new file mode 100644
> index 0000000..497cd09
> --- /dev/null
> +++ b/drivers/clk/meson/gxbb-aoclk-32k.c
> @@ -0,0 +1,180 @@
> +/*
> + * Copyright (c) 2017 BayLibre, SAS.
> + * Author: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/bitfield.h>
> +#include <linux/regmap.h>
> +#include "gxbb-aoclk.h"
> +
> +/*
> + * The AO Domain embeds a dual/divider to generate a more precise
> + * 32,768KHz clock for low-power suspend mode and CEC.
> + */
> +
> +#define CLK_CNTL0_N1_MASK GENMASK(11, 0)
> +#define CLK_CNTL0_N2_MASK GENMASK(23, 12)
> +#define CLK_CNTL0_DUALDIV_EN BIT(28)
> +#define CLK_CNTL0_OUT_GATE_EN BIT(30)
> +#define CLK_CNTL0_IN_GATE_EN BIT(31)
> +
> +#define CLK_CNTL1_M1_MASK GENMASK(11, 0)
> +#define CLK_CNTL1_M2_MASK GENMASK(23, 12)
> +#define CLK_CNTL1_BYPASS_EN BIT(24)
> +#define CLK_CNTL1_SELECT_OSC BIT(27)
> +
> +#define PWR_CNTL_ALT_32K_SEL GENMASK(13, 10)
> +
> +struct cec_32k_freq_table {
> + unsigned long parent_rate;
> + unsigned long target_rate;
> + bool dualdiv;
> + unsigned int n1;
> + unsigned int n2;
> + unsigned int m1;
> + unsigned int m2;
> +};
> +
> +static const struct cec_32k_freq_table aoclk_cec_32k_table[] = {
> + [0] = {
> + .parent_rate = 24000000,
shouldn't you add a parent (XTAL) to this new clock so you could get
rid of this?
> + .target_rate = 32768,
> + .dualdiv = true,
> + .n1 = 733,
> + .n2 = 732,
> + .m1 = 8,
> + .m2 = 11,
> + },
> +};
> +
> +/*
> + * If CLK_CNTL0_DUALDIV_EN == 0
> + * - will use N1 divider only
> + * If CLK_CNTL0_DUALDIV_EN == 1
> + * - hold M1 cycles of N1 divider then changes to N2
> + * - hold M2 cycles of N2 divider then changes to N1
> + * Then we can get more accurate division.
> + */
> +static unsigned long aoclk_cec_32k_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct aoclk_cec_32k *cec_32k = to_aoclk_cec_32k(hw);
> + unsigned long n1;
> + u32 reg0, reg1;
> +
> + regmap_read(cec_32k->regmap, AO_RTC_ALT_CLK_CNTL0, ®0);
> + regmap_read(cec_32k->regmap, AO_RTC_ALT_CLK_CNTL1, ®1);
> +
> + if (reg1 & CLK_CNTL1_BYPASS_EN)
> + return parent_rate;
> +
> + if (reg0 & CLK_CNTL0_DUALDIV_EN) {
> + unsigned long n2, m1, m2, f1, f2, p1, p2;
> +
> + n1 = FIELD_GET(CLK_CNTL0_N1_MASK, reg0) + 1;
> + n2 = FIELD_GET(CLK_CNTL0_N2_MASK, reg0) + 1;
> +
> + m1 = FIELD_GET(CLK_CNTL1_M1_MASK, reg1) + 1;
> + m2 = FIELD_GET(CLK_CNTL1_M2_MASK, reg1) + 1;
> +
> + f1 = DIV_ROUND_CLOSEST(parent_rate, n1);
> + f2 = DIV_ROUND_CLOSEST(parent_rate, n2);
> +
> + p1 = DIV_ROUND_CLOSEST(100000000 * m1, f1 * (m1 + m2));
> + p2 = DIV_ROUND_CLOSEST(100000000 * m2, f2 * (m1 + m2));
> +
> + return DIV_ROUND_UP(100000000, p1 + p2);
> + }
> +
> + n1 = FIELD_GET(CLK_CNTL0_N1_MASK, reg0) + 1;
> +
> + return DIV_ROUND_CLOSEST(parent_rate, n1);
> +}
> +
> +static const struct cec_32k_freq_table *find_cec_32k_freq(unsigned long rate,
> + unsigned long prate)
> +{
> + int i;
> +
> + for (i = 0 ; i < ARRAY_SIZE(aoclk_cec_32k_table) ; ++i)
> + if (aoclk_cec_32k_table[i].parent_rate == prate &&
> + aoclk_cec_32k_table[i].target_rate == rate)
> + return &aoclk_cec_32k_table[i];
> +
> + return NULL;
> +}
> +
> +static long aoclk_cec_32k_round_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long *prate)
> +{
> + const struct cec_32k_freq_table *freq = find_cec_32k_freq(rate,
> + *prate);
> +
> + /* If invalid return first one */
> + if (!freq)
> + return freq[0].target_rate;
> +
> + return freq->target_rate;
> +}
> +
> +static int aoclk_cec_32k_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long parent_rate)
> +{
> + const struct cec_32k_freq_table *freq = find_cec_32k_freq(rate,
> + parent_rate);
> + struct aoclk_cec_32k *cec_32k = to_aoclk_cec_32k(hw);
> + u32 reg = 0;
> +
> + if (!freq)
> + return -EINVAL;
> +
> + /* Disable clock */
> + regmap_update_bits(cec_32k->regmap, AO_RTC_ALT_CLK_CNTL0,
> + CLK_CNTL0_IN_GATE_EN | CLK_CNTL0_OUT_GATE_EN, 0);
> +
> + if (freq->dualdiv)
> + reg = CLK_CNTL0_DUALDIV_EN |
> + FIELD_PREP(CLK_CNTL0_N1_MASK, freq->n1 - 1) |
> + FIELD_PREP(CLK_CNTL0_N2_MASK, freq->n2 - 1);
> + else
> + reg = FIELD_PREP(CLK_CNTL0_N1_MASK, freq->n1 - 1);
> +
> + regmap_write(cec_32k->regmap, AO_RTC_ALT_CLK_CNTL0, reg);
> +
> + if (freq->dualdiv)
> + reg = FIELD_PREP(CLK_CNTL1_M1_MASK, freq->m1 - 1) |
> + FIELD_PREP(CLK_CNTL1_M2_MASK, freq->m2 - 1);
> + else
> + reg = FIELD_PREP(CLK_CNTL1_M1_MASK, freq->m1 - 1);
> +
> + regmap_write(cec_32k->regmap, AO_RTC_ALT_CLK_CNTL1, reg);
> +
> + /* Enable clock */
> + regmap_update_bits(cec_32k->regmap, AO_RTC_ALT_CLK_CNTL0,
> + CLK_CNTL0_IN_GATE_EN, CLK_CNTL0_IN_GATE_EN);
based on how I understand your code the *input* clock needs to be
gated during rate change, so (in my opinion) it's fine to toggle it
here.
> +
> + udelay(200);
> +
> + regmap_update_bits(cec_32k->regmap, AO_RTC_ALT_CLK_CNTL0,
> + CLK_CNTL0_OUT_GATE_EN, CLK_CNTL0_OUT_GATE_EN);
however, should we make the output clock configurable by implementing
clk_ops.enable and clk_ops.disable?
> +
> + regmap_update_bits(cec_32k->regmap, AO_CRT_CLK_CNTL1,
> + CLK_CNTL1_SELECT_OSC, CLK_CNTL1_SELECT_OSC);
> +
> + /* Select 32k from XTAL */
> + regmap_update_bits(cec_32k->regmap,
> + AO_RTI_PWR_CNTL_REG0,
> + PWR_CNTL_ALT_32K_SEL,
> + FIELD_PREP(PWR_CNTL_ALT_32K_SEL, 4));
is it correct to configure the muxes after enabling the clock output?
also do you know about the other parents of PWR_CNTL_ALT_32K_SEL?
> +
> + return 0;
> +}
> +
> +const struct clk_ops meson_aoclk_cec_32k_ops = {
> + .recalc_rate = aoclk_cec_32k_recalc_rate,
> + .round_rate = aoclk_cec_32k_round_rate,
> + .set_rate = aoclk_cec_32k_set_rate,
> +};
> diff --git a/drivers/clk/meson/gxbb-aoclk.c b/drivers/clk/meson/gxbb-aoclk.c
> index f61506c..6c161e0 100644
> --- a/drivers/clk/meson/gxbb-aoclk.c
> +++ b/drivers/clk/meson/gxbb-aoclk.c
> @@ -59,6 +59,7 @@
> #include <linux/mfd/syscon.h>
> #include <linux/regmap.h>
> #include <linux/init.h>
> +#include <linux/delay.h>
> #include <dt-bindings/clock/gxbb-aoclkc.h>
> #include <dt-bindings/reset/gxbb-aoclkc.h>
> #include "gxbb-aoclk.h"
> @@ -105,6 +106,17 @@ static int gxbb_aoclk_do_reset(struct reset_controller_dev *rcdev,
> GXBB_AO_GATE(uart2, 5);
> GXBB_AO_GATE(ir_blaster, 6);
>
> +static struct aoclk_cec_32k cec_32k_ao = {
> + .lock = &gxbb_aoclk_lock,
> + .hw.init = &(struct clk_init_data) {
> + .name = "cec_32k_ao",
> + .ops = &meson_aoclk_cec_32k_ops,
> + .parent_names = (const char *[]){ "xtal" },
> + .num_parents = 1,
> + .flags = CLK_IGNORE_UNUSED,
> + },
> +};
> +
> static unsigned int gxbb_aoclk_reset[] = {
> [RESET_AO_REMOTE] = 16,
> [RESET_AO_I2C_MASTER] = 18,
> @@ -131,8 +143,9 @@ static int gxbb_aoclk_do_reset(struct reset_controller_dev *rcdev,
> [CLKID_AO_UART1] = &uart1_ao.hw,
> [CLKID_AO_UART2] = &uart2_ao.hw,
> [CLKID_AO_IR_BLASTER] = &ir_blaster_ao.hw,
> + [CLKID_AO_CEC_32K] = &cec_32k_ao.hw,
> },
> - .num = ARRAY_SIZE(gxbb_aoclk_gate),
> + .num = 7,
> };
>
> static int gxbb_aoclkc_probe(struct platform_device *pdev)
> @@ -172,6 +185,12 @@ static int gxbb_aoclkc_probe(struct platform_device *pdev)
> return ret;
> }
>
> + /* Specific clocks */
> + cec_32k_ao.regmap = regmap;
> + ret = devm_clk_hw_register(dev, &cec_32k_ao.hw);
> + if (ret)
> + return ret;
> +
> return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
> &gxbb_aoclk_onecell_data);
> }
> diff --git a/drivers/clk/meson/gxbb-aoclk.h b/drivers/clk/meson/gxbb-aoclk.h
> index 2e26108..e8604c8 100644
> --- a/drivers/clk/meson/gxbb-aoclk.h
> +++ b/drivers/clk/meson/gxbb-aoclk.h
> @@ -9,7 +9,13 @@
> #define __GXBB_AOCLKC_H
>
> /* AO Configuration Clock registers offsets */
> +#define AO_RTI_PWR_CNTL_REG1 0x0c
> +#define AO_RTI_PWR_CNTL_REG0 0x10
> #define AO_RTI_GEN_CNTL_REG0 0x40
> +#define AO_OSCIN_CNTL 0x58
> +#define AO_CRT_CLK_CNTL1 0x68
> +#define AO_RTC_ALT_CLK_CNTL0 0x94
> +#define AO_RTC_ALT_CLK_CNTL1 0x98
>
> struct aoclk_gate_regmap {
> struct clk_hw hw;
> @@ -23,4 +29,14 @@ struct aoclk_gate_regmap {
>
> extern const struct clk_ops meson_aoclk_gate_regmap_ops;
>
> +struct aoclk_cec_32k {
> + struct clk_hw hw;
> + struct regmap *regmap;
> + spinlock_t *lock;
> +};
> +
> +#define to_aoclk_cec_32k(_hw) container_of(_hw, struct aoclk_cec_32k, hw)
> +
> +extern const struct clk_ops meson_aoclk_cec_32k_ops;
> +
> #endif /* __GXBB_AOCLKC_H */
> --
> 1.9.1
>
>
> _______________________________________________
> linux-amlogic mailing list
> linux-amlogic@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-amlogic