Re: [PATCH v2 1/3] media: V3s: Add support for Allwinner CSI.

[Yong]

On Thu, 27 Jul 2017 14:25:51 +0200
Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:

> On Thu, Jul 27, 2017 at 03:16:44PM +0300, Baruch Siach wrote:
> > Hi Yong,
> > 
> > I managed to get the Frame Done interrupt with the previous version of this 
> > driver on the A33 OLinuXino. No data yet (all zeros). I'm still working on it.
> > 
> > One comment below.
> > 
> > On Thu, Jul 27, 2017 at 01:01:35PM +0800, Yong Deng wrote:
> > > Allwinner V3s SoC have two CSI module. CSI0 is used for MIPI interface
> > > and CSI1 is used for parallel interface. This is not documented in
> > > datasheet but by testing and guess.
> > > 
> > > This patch implement a v4l2 framework driver for it.
> > > 
> > > Currently, the driver only support the parallel interface. MIPI-CSI2,
> > > ISP's support are not included in this patch.
> > > 
> > > Signed-off-by: Yong Deng <yong.deng@xxxxxxxxxxxx>
> > > ---
> > 
> > [...]
> > 
> > > +static int update_buf_addr(struct sun6i_csi *csi, dma_addr_t addr)
> > > +{
> > > +	struct sun6i_csi_dev *sdev = sun6i_csi_to_dev(csi);
> > > +	/* transform physical address to bus address */
> > > +	dma_addr_t bus_addr = addr - 0x40000000;
> > 
> > What is the source of this magic number? Is it platform dependent? Are there 
> > other devices doing DMA that need this adjustment?
> 
> This is the RAM base address in most (but not all) Allwinner
> SoCs. You'll want to use PHYS_OFFSET instead.

I have try to use PHYS_OFFSET. But I found it is not 0x40000000. I will
try it again.

> 
> Maxime
> 
> -- 
> Maxime Ripard, Free Electrons
> Embedded Linux and Kernel engineering
> http://free-electrons.com


Thanks,
Yong