[PATCH v3 28/59] irqchip/gic-v3-its: Allow doorbell interrupts to be injected/cleared
From: Marc Zyngier
Date: Mon Jul 31 2017 - 13:53:06 EST
While the doorbell interrupts are usually driven by the HW itself,
having a way to trigger them independently has proved to be a
really useful debug feature. As it is actually very little code,
let's add it to the VPE irqchip operations.
Signed-off-by: Marc Zyngier <marc.zyngier@xxxxxxx>
---
drivers/irqchip/irq-gic-v3-its.c | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 210840e0ec92..a177af0b1657 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -2404,12 +2404,41 @@ static void its_vpe_unmask_irq(struct irq_data *d)
its_vpe_send_inv(d);
}
+/* This is really a debug feature */
+static int its_vpe_set_irqchip_state(struct irq_data *d,
+ enum irqchip_irq_state which,
+ bool state)
+{
+ struct its_vpe *vpe = irq_data_get_irq_chip_data(d);
+
+ if (which != IRQCHIP_STATE_PENDING)
+ return -EINVAL;
+
+ if (gic_rdists->has_direct_lpi) {
+ void __iomem *rdbase;
+
+ rdbase = per_cpu_ptr(gic_rdists->rdist, vpe->col_idx)->rd_base;
+ if (state)
+ gic_write_lpir(vpe->vpe_db_lpi, rdbase + GICR_SETLPIR);
+ else
+ gic_write_lpir(vpe->vpe_db_lpi, rdbase + GICR_CLRLPIR);
+ } else {
+ if (state)
+ its_vpe_send_cmd(vpe, its_send_int);
+ else
+ its_vpe_send_cmd(vpe, its_send_clear);
+ }
+
+ return 0;
+}
+
static struct irq_chip its_vpe_irq_chip = {
.name = "GICv4-vpe",
.irq_mask = its_vpe_mask_irq,
.irq_unmask = its_vpe_unmask_irq,
.irq_eoi = irq_chip_eoi_parent,
.irq_set_affinity = its_vpe_set_affinity,
+ .irq_set_irqchip_state = its_vpe_set_irqchip_state,
.irq_set_vcpu_affinity = its_vpe_set_vcpu_affinity,
};
--
2.11.0