Re: [PATCH v3 4/4] clk: meson: gxbb-aoclk: Add CEC 32k clock

From: Neil Armstrong
Date: Tue Aug 01 2017 - 07:51:18 EST


On 07/31/2017 06:25 PM, Chris Moore wrote:
> Hi,
>
> Le 31/07/2017 Ã 14:42, Neil Armstrong a Ãcrit :
>> The CEC 32K AO Clock is a dual divider with dual counter to provide a more
>> precise 32768Hz clock for the CEC subsystem from the external xtal.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
>> ---
>> drivers/clk/meson/Makefile | 2 +-
>> drivers/clk/meson/gxbb-aoclk-32k.c | 194 +++++++++++++++++++++++++++++++++++++
>> drivers/clk/meson/gxbb-aoclk.c | 21 +++-
>> drivers/clk/meson/gxbb-aoclk.h | 16 +++
>> 4 files changed, 231 insertions(+), 2 deletions(-)
>> create mode 100644 drivers/clk/meson/gxbb-aoclk-32k.c
>>
>> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
>> index de65427..b139d41 100644
>> --- a/drivers/clk/meson/Makefile
>> +++ b/drivers/clk/meson/Makefile
>> @@ -4,4 +4,4 @@
>> obj-$(CONFIG_COMMON_CLK_AMLOGIC) += clk-pll.o clk-cpu.o clk-mpll.o clk-audio-divider.o
>> obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o
>> -obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-regmap.o
>> +obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o gxbb-aoclk-regmap.o gxbb-aoclk-32k.o
>> diff --git a/drivers/clk/meson/gxbb-aoclk-32k.c b/drivers/clk/meson/gxbb-aoclk-32k.c
>
> [snip]
>
>> +static int aoclk_cec_32k_set_rate(struct clk_hw *hw, unsigned long rate,
>> + unsigned long parent_rate)
>> +{
>> + const struct cec_32k_freq_table *freq = find_cec_32k_freq(rate,
>> + parent_rate);
>> + struct aoclk_cec_32k *cec_32k = to_aoclk_cec_32k(hw);
>> + u32 reg = 0;
>> +
>> + if (!freq)
>> + return -EINVAL;
>> +
>> + /* Disable clock */
>> + regmap_update_bits(cec_32k->regmap, AO_RTC_ALT_CLK_CNTL0,
>> + CLK_CNTL0_IN_GATE_EN | CLK_CNTL0_OUT_GATE_EN, 0);
>> +
>> + reg = FIELD_PREP(CLK_CNTL0_N1_MASK, freq->n1 - 1);
>> + if (freq->dualdiv)
>> + reg |= CLK_CNTL0_DUALDIV_EN |
>> + FIELD_PREP(CLK_CNTL0_N2_MASK, freq->n2 - 1);
>> +
>> + regmap_write(cec_32k->regmap, AO_RTC_ALT_CLK_CNTL0, reg);
>> +
>> + reg = FIELD_PREP(CLK_CNTL1_M1_MASK, freq->m1 - 1);
>> + if (freq->dualdiv)
>> + reg = FIELD_PREP(CLK_CNTL1_M2_MASK, freq->m2 - 1);
>
> s/=/|=/

Aww, thanks for spotting it, I'll post a v3.1
It still worked but was acting like a single divider...

>
> Cheers,
> Chris

Thanks,
Neil