Re: [PATCH] [RFC] mtd: atmel-quadspi: fix build issues

From: Cyrille Pitchen
Date: Tue Aug 01 2017 - 15:41:35 EST


Hi Arnd,

Le 22/07/2017 Ã 00:21, Arnd Bergmann a Ãcrit :
> I ran into a link-time error with the atmel-quadspi driver on the
> EBSA110 platform:
>
> drivers/mtd/built-in.o: In function `atmel_qspi_run_command':
> :(.text+0x1ee3c): undefined reference to `_memcpy_toio'
> :(.text+0x1ee48): undefined reference to `_memcpy_fromio'
>
> The problem is that _memcpy_toio/_memcpy_fromio are not available
> on that platform, and we have to prevent building the driver there.
>
> A related problem is that the functions are not portable APIs
> and should not be called directly from a device driver. On
> little-endian machines, the regular memcpy_toio/memcpy_fromio
> functions are defined as optimized versions using multi-byte
> transfers that are much faster.
>
> Cyrille mentioned that initially using memcpy_toio/memcpy_fromio
> did not work, but I suspect that this was the result of a bug
> that has since been fixed. With that change, we can also
> compile-test on other architectures.
>
> Link: http://lists.infradead.org/pipermail/linux-mtd/2016-July/068583.html
> Fixes: 161aaab8a067 ("mtd: atmel-quadspi: add driver for Atmel QSPI controller")
> Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
> ---
> drivers/mtd/spi-nor/Kconfig | 2 +-
> drivers/mtd/spi-nor/atmel-quadspi.c | 4 ++--
> 2 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
> index 293c8a4d1e49..22e5fc4080f8 100644
> --- a/drivers/mtd/spi-nor/Kconfig
> +++ b/drivers/mtd/spi-nor/Kconfig
> @@ -41,7 +41,7 @@ config SPI_ASPEED_SMC
>
> config SPI_ATMEL_QUADSPI
> tristate "Atmel Quad SPI Controller"
> - depends on ARCH_AT91 || (ARM && COMPILE_TEST)
> + depends on ARCH_AT91 || (COMPILE_TEST && !ARCH_EBSA110)
> depends on OF && HAS_IOMEM
> help
> This enables support for the Quad SPI controller in master mode.
> diff --git a/drivers/mtd/spi-nor/atmel-quadspi.c b/drivers/mtd/spi-nor/atmel-quadspi.c
> index ba76fa8f2031..ff3849106e77 100644
> --- a/drivers/mtd/spi-nor/atmel-quadspi.c
> +++ b/drivers/mtd/spi-nor/atmel-quadspi.c
> @@ -208,9 +208,9 @@ static int atmel_qspi_run_transfer(struct atmel_qspi *aq,
> if (cmd->enable.bits.address)
> ahb_mem += cmd->address;
> if (cmd->tx_buf)
> - _memcpy_toio(ahb_mem, cmd->tx_buf, cmd->buf_len);
> + memcpy_toio(ahb_mem, cmd->tx_buf, cmd->buf_len);
> else
> - _memcpy_fromio(cmd->rx_buf, ahb_mem, cmd->buf_len);
> + memcpy_fromio(cmd->rx_buf, ahb_mem, cmd->buf_len);
>

At least on AT91 platforms and likely on most ARM boards,
memcpy_fromio == memcpy_toio == memcpy.

I got some sama5d2 hardware last week, so I'll try to test your patch
within few days because as you said maybe memcpy() was broken when I
developed this driver at first but now memcpy() is likely to have been
fixed so it might be interesting to get rid of _memcpy_fromio() and
_memcpy_toio() because this is not the first time those 2 functions have
created issues when building the Atmel Quad SPI driver on other platforms.

So thanks for you're patch, I'll give it a try :)

Best regards,

Cyrille


> return 0;
> }
>