[PATCH net-next v2 00/11] net: dsa: rework EEE support

From: Vivien Didelot
Date: Tue Aug 01 2017 - 16:37:49 EST

EEE implies configuring the port's PHY and MAC of both ends of the wire.

The current EEE support in DSA mixes PHY and MAC configuration, which is
bad because PHYs must be configured through a proper PHY driver. The DSA
switch operations for EEE are only meant for configuring the port's MAC,
which are integrated in the Ethernet switch device.

This patchset fixes the EEE support in qca8k driver, makes the DSA layer
call phy_init_eee for all drivers, and remove the EEE support from the
mv88e6xxx driver since the Marvell PHY driver should be enough for it.

Changes in v2:
- make PHY device and DSA EEE ops mandatory for slave EEE operations.
- simply return 0 in drivers which don't need to do anything to
configure the port' MAC. Subsequent PHY calls will be enough.

Vivien Didelot (11):
net: dsa: PHY device is mandatory for EEE
net: dsa: qca8k: fix EEE init
net: dsa: qca8k: enable EEE once
net: dsa: qca8k: do not cache unneeded EEE fields
net: dsa: qca8k: empty qca8k_get_eee
net: dsa: bcm_sf2: remove unneeded supported flags
net: dsa: mv88e6xxx: call phy_init_eee
net: dsa: call phy_init_eee in DSA layer
net: dsa: remove PHY device argument from .set_eee
net: dsa: mv88e6xxx: remove EEE support
net: dsa: rename switch EEE ops

drivers/net/dsa/bcm_sf2.c | 26 +++--------
drivers/net/dsa/mv88e6xxx/chip.c | 86 +++++------------------------------
drivers/net/dsa/mv88e6xxx/chip.h | 6 ---
drivers/net/dsa/mv88e6xxx/phy.c | 96 ----------------------------------------
drivers/net/dsa/mv88e6xxx/phy.h | 22 ---------
drivers/net/dsa/mv88e6xxx/port.c | 17 -------
drivers/net/dsa/mv88e6xxx/port.h | 3 --
drivers/net/dsa/qca8k.c | 68 ++++------------------------
drivers/net/dsa/qca8k.h | 1 -
include/net/dsa.h | 11 +++--
net/dsa/slave.c | 30 ++++++++-----
11 files changed, 49 insertions(+), 317 deletions(-)