[PATCH V5 2/2] PCI: handle CRS returned by device after FLR

[Sinan Kaya]

An endpoint is allowed to issue Configuration Request Retry Status (CRS)
following a Function Level Reset (FLR) request to indicate that it is
not ready to accept new requests. CRS is defined in PCIe r3.1, sec 2.3.1.
Request Handling Rules and CRS usage in FLR context is mentioned in
PCIe r3.1, sec 6.6.2. Function-Level Reset.

Adding a vendor ID read if this is a physical function before attempting
to read any other registers on the endpoint. A CRS indication will only
be given if the address to be read is vendor ID register.
pci_bus_read_dev_vendor_id() knows how to deal with CRS returned values.

If pci_bus_read_dev_vendor_id() fails, it prints a user visible warning
after provided 1 second timeout is reached. pci_flr_wait() will keep
calling this function 60 times to allow up to 60 seconds to be consistent
with the rest of the kernel CRS timeout handling.

Signed-off-by: Sinan Kaya <okaya@xxxxxxxxxxxxxx>
---
 drivers/pci/pci.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 2ed604a..25c7a83 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3813,14 +3813,16 @@ int pci_wait_for_pending_transaction(struct pci_dev *dev)
 
 /*
  * We should only need to wait 100ms after FLR for virtual functions.
- * Wait for up to 1000ms for config space to return something other than -1.
- * Intel IGD requires this when an LCD panel is attached.  We read the 2nd
- * dword because VFs don't implement the 1st dword.
+ * Wait for up to 60s for config space to return something other than -1.
+ * Intel IGD requires 1s when an LCD panel is attached.  We use
+ * pci_bus_read_dev_vendor_id() for reading the vendor ID as it handles
+ * CRS gracefully.
  */
 static void pci_flr_wait(struct pci_dev *dev)
 {
 	int i = 0;
 	u32 id;
+	bool ret;
 
 	if (dev->is_virtfn) {
 		msleep(100);
@@ -3828,15 +3830,15 @@ static void pci_flr_wait(struct pci_dev *dev)
 	}
 
 	do {
-		msleep(100);
-		pci_read_config_dword(dev, PCI_COMMAND, &id);
-	} while (i++ < 10 && id == ~0);
+		ret = pci_bus_read_dev_vendor_id(dev->bus, dev->devfn, &id,
+						 1000);
+	} while (i++ < 60 && !ret);
 
-	if (id == ~0)
+	if (!ret)
 		dev_warn(&dev->dev, "Failed to return from FLR\n");
 	else if (i > 1)
-		dev_info(&dev->dev, "Required additional %dms to return from FLR\n",
-			 (i - 1) * 100);
+		dev_info(&dev->dev, "Required additional %ds to return from FLR\n",
+			 (i - 1));
 }
 
 /**
-- 
1.9.1