[PATCH 2/3] dt-bindings: usb: keystone-usb: Update bindings pm and clocks properties

From: Franklin S Cooper Jr
Date: Wed Aug 02 2017 - 16:20:05 EST


Update varous properties to properly indicate their requirement depending
on the SoC.

Signed-off-by: Franklin S Cooper Jr <fcooper@xxxxxx>
---
Documentation/devicetree/bindings/usb/keystone-usb.txt | 18 ++++++++++++++++--
1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt
index 60527d3..307531b 100644
--- a/Documentation/devicetree/bindings/usb/keystone-usb.txt
+++ b/Documentation/devicetree/bindings/usb/keystone-usb.txt
@@ -12,8 +12,22 @@ Required properties:
MPU.
- ranges: allows valid 1:1 translation between child's address space and
parent's address space.
- - clocks: Clock IDs array as required by the controller.
- - clock-names: names of clocks correseponding to IDs in the clock property.
+
+SoC-specific Required Properties:
+The following are mandatory properties for Keystone 2 66AK2HK, 66AK2L and 66AK2E
+SoCs only:
+
+- clocks: Clock IDs array as required by the controller.
+- clock-names: names of clocks correseponding to IDs in the clock
+ property.
+
+
+The following are mandatory properties for Keystone 2 66AK2G SoCs only:
+
+- power-domains: Should contain a phandle to a PM domain provider node
+ and an args specifier containing the USB device id
+ value. This property is as per the binding,
+ Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt

Sub-nodes:
The dwc3 core should be added as subnode to Keystone DWC3 glue.
--
2.9.4.dirty