[PATCH 3/4] phy: phy-mt65xx-usb3: add mediatek directory and rename file

From: Chunfeng Yun
Date: Thu Aug 03 2017 - 06:03:07 EST


The driver is actually for T-PHY which supports USB3.0, PCIe and SATA,
and supports more SoCs now, but not just only for series of mt65xx SoCs,
so the name of file, data struct, functions etc with 'mt65xx' may cause
misunderstanding when new SoCs are supported. Here rename them to reflect
the real functions and also enhance readability.

And also update MAINTAINERS file to reflect the correct driver

Change-Id: I7ee75bde25306d017436099c59cf9088df4ea37f
Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
---
MAINTAINERS | 2 +-
drivers/phy/Kconfig | 9 +-
drivers/phy/Makefile | 2 +-
drivers/phy/mediatek/Kconfig | 14 +
drivers/phy/mediatek/Makefile | 5 +
drivers/phy/mediatek/phy-mtk-tphy.c | 1081 +++++++++++++++++++++++++++++++++++
drivers/phy/phy-mt65xx-usb3.c | 1081 -----------------------------------
7 files changed, 1103 insertions(+), 1091 deletions(-)
create mode 100644 drivers/phy/mediatek/Kconfig
create mode 100644 drivers/phy/mediatek/Makefile
create mode 100644 drivers/phy/mediatek/phy-mtk-tphy.c
delete mode 100644 drivers/phy/phy-mt65xx-usb3.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 205d397..428e5d0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1599,7 +1599,7 @@ M: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
L: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx (moderated for non-subscribers)
L: linux-mediatek@xxxxxxxxxxxxxxxxxxx (moderated for non-subscribers)
S: Maintained
-F: drivers/phy/phy-mt65xx-usb3.c
+F: drivers/phy/mediatek/phy-mtk-tphy.c

ARM/MICREL KS8695 ARCHITECTURE
M: Greg Ungerer <gerg@xxxxxxxxxxx>
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index c1807d4..d16704e 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -26,14 +26,6 @@ config PHY_LPC18XX_USB_OTG
This driver is need for USB0 support on LPC18xx/43xx and takes
care of enabling and clock setup.

-config PHY_MT65XX_USB3
- tristate "Mediatek USB3.0 PHY Driver"
- depends on ARCH_MEDIATEK && OF
- select GENERIC_PHY
- help
- Say 'Y' here to add support for Mediatek USB3.0 PHY driver,
- it supports multiple usb2.0 and usb3.0 ports.
-
config PHY_PISTACHIO_USB
tristate "IMG Pistachio USB2.0 PHY driver"
depends on MACH_PISTACHIO
@@ -53,6 +45,7 @@ source "drivers/phy/amlogic/Kconfig"
source "drivers/phy/broadcom/Kconfig"
source "drivers/phy/hisilicon/Kconfig"
source "drivers/phy/marvell/Kconfig"
+source "drivers/phy/mediatek/Kconfig"
source "drivers/phy/motorola/Kconfig"
source "drivers/phy/qualcomm/Kconfig"
source "drivers/phy/renesas/Kconfig"
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index f252201..1c68189 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -4,12 +4,12 @@

obj-$(CONFIG_GENERIC_PHY) += phy-core.o
obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o
-obj-$(CONFIG_PHY_MT65XX_USB3) += phy-mt65xx-usb3.o
obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o

obj-$(CONFIG_ARCH_SUNXI) += allwinner/
obj-$(CONFIG_ARCH_MESON) += amlogic/
+obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
obj-$(CONFIG_ARCH_RENESAS) += renesas/
obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
obj-$(CONFIG_ARCH_TEGRA) += tegra/
diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig
new file mode 100644
index 0000000..88ab4e2
--- /dev/null
+++ b/drivers/phy/mediatek/Kconfig
@@ -0,0 +1,14 @@
+#
+# Phy drivers for Mediatek devices
+#
+config PHY_MTK_TPHY
+ tristate "MediaTek T-PHY Driver"
+ depends on ARCH_MEDIATEK && OF
+ select GENERIC_PHY
+ help
+ Say 'Y' here to add support for MediaTek T-PHY driver,
+ it supports multiple usb2.0, usb3.0 ports, PCIe and
+ SATA, and meanwhile supports two version T-PHY which have
+ different banks layout, the T-PHY with shared banks between
+ multi-ports is first version, otherwise is second veriosn,
+ so you can easily distinguish them by banks layout.
diff --git a/drivers/phy/mediatek/Makefile b/drivers/phy/mediatek/Makefile
new file mode 100644
index 0000000..763a92e
--- /dev/null
+++ b/drivers/phy/mediatek/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the phy drivers.
+#
+
+obj-$(CONFIG_PHY_MTK_TPHY) += phy-mtk-tphy.o
diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
new file mode 100644
index 0000000..e3baad7
--- /dev/null
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -0,0 +1,1081 @@
+/*
+ * Copyright (c) 2015 MediaTek Inc.
+ * Author: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <dt-bindings/phy/phy.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+/* version V1 sub-banks offset base address */
+/* banks shared by multiple phys */
+#define SSUSB_SIFSLV_V1_SPLLC 0x000 /* shared by u3 phys */
+#define SSUSB_SIFSLV_V1_U2FREQ 0x100 /* shared by u2 phys */
+/* u2 phy bank */
+#define SSUSB_SIFSLV_V1_U2PHY_COM 0x000
+/* u3/pcie/sata phy banks */
+#define SSUSB_SIFSLV_V1_U3PHYD 0x000
+#define SSUSB_SIFSLV_V1_U3PHYA 0x200
+
+/* version V2 sub-banks offset base address */
+/* u2 phy banks */
+#define SSUSB_SIFSLV_V2_MISC 0x000
+#define SSUSB_SIFSLV_V2_U2FREQ 0x100
+#define SSUSB_SIFSLV_V2_U2PHY_COM 0x300
+/* u3/pcie/sata phy banks */
+#define SSUSB_SIFSLV_V2_SPLLC 0x000
+#define SSUSB_SIFSLV_V2_CHIP 0x100
+#define SSUSB_SIFSLV_V2_U3PHYD 0x200
+#define SSUSB_SIFSLV_V2_U3PHYA 0x400
+
+#define U3P_USBPHYACR0 0x000
+#define PA0_RG_U2PLL_FORCE_ON BIT(15)
+#define PA0_RG_USB20_INTR_EN BIT(5)
+
+#define U3P_USBPHYACR2 0x008
+#define PA2_RG_SIF_U2PLL_FORCE_EN BIT(18)
+
+#define U3P_USBPHYACR5 0x014
+#define PA5_RG_U2_HSTX_SRCAL_EN BIT(15)
+#define PA5_RG_U2_HSTX_SRCTRL GENMASK(14, 12)
+#define PA5_RG_U2_HSTX_SRCTRL_VAL(x) ((0x7 & (x)) << 12)
+#define PA5_RG_U2_HS_100U_U3_EN BIT(11)
+
+#define U3P_USBPHYACR6 0x018
+#define PA6_RG_U2_BC11_SW_EN BIT(23)
+#define PA6_RG_U2_OTG_VBUSCMP_EN BIT(20)
+#define PA6_RG_U2_SQTH GENMASK(3, 0)
+#define PA6_RG_U2_SQTH_VAL(x) (0xf & (x))
+
+#define U3P_U2PHYACR4 0x020
+#define P2C_RG_USB20_GPIO_CTL BIT(9)
+#define P2C_USB20_GPIO_MODE BIT(8)
+#define P2C_U2_GPIO_CTR_MSK (P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE)
+
+#define U3D_U2PHYDCR0 0x060
+#define P2C_RG_SIF_U2PLL_FORCE_ON BIT(24)
+
+#define U3P_U2PHYDTM0 0x068
+#define P2C_FORCE_UART_EN BIT(26)
+#define P2C_FORCE_DATAIN BIT(23)
+#define P2C_FORCE_DM_PULLDOWN BIT(21)
+#define P2C_FORCE_DP_PULLDOWN BIT(20)
+#define P2C_FORCE_XCVRSEL BIT(19)
+#define P2C_FORCE_SUSPENDM BIT(18)
+#define P2C_FORCE_TERMSEL BIT(17)
+#define P2C_RG_DATAIN GENMASK(13, 10)
+#define P2C_RG_DATAIN_VAL(x) ((0xf & (x)) << 10)
+#define P2C_RG_DMPULLDOWN BIT(7)
+#define P2C_RG_DPPULLDOWN BIT(6)
+#define P2C_RG_XCVRSEL GENMASK(5, 4)
+#define P2C_RG_XCVRSEL_VAL(x) ((0x3 & (x)) << 4)
+#define P2C_RG_SUSPENDM BIT(3)
+#define P2C_RG_TERMSEL BIT(2)
+#define P2C_DTM0_PART_MASK \
+ (P2C_FORCE_DATAIN | P2C_FORCE_DM_PULLDOWN | \
+ P2C_FORCE_DP_PULLDOWN | P2C_FORCE_XCVRSEL | \
+ P2C_FORCE_TERMSEL | P2C_RG_DMPULLDOWN | \
+ P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL)
+
+#define U3P_U2PHYDTM1 0x06C
+#define P2C_RG_UART_EN BIT(16)
+#define P2C_RG_VBUSVALID BIT(5)
+#define P2C_RG_SESSEND BIT(4)
+#define P2C_RG_AVALID BIT(2)
+
+#define U3P_U3_CHIP_GPIO_CTLD 0x0c
+#define P3C_REG_IP_SW_RST BIT(31)
+#define P3C_MCU_BUS_CK_GATE_EN BIT(30)
+#define P3C_FORCE_IP_SW_RST BIT(29)
+
+#define U3P_U3_CHIP_GPIO_CTLE 0x10
+#define P3C_RG_SWRST_U3_PHYD BIT(25)
+#define P3C_RG_SWRST_U3_PHYD_FORCE_EN BIT(24)
+
+#define U3P_U3_PHYA_REG0 0x000
+#define P3A_RG_CLKDRV_OFF GENMASK(3, 2)
+#define P3A_RG_CLKDRV_OFF_VAL(x) ((0x3 & (x)) << 2)
+
+#define U3P_U3_PHYA_REG1 0x004
+#define P3A_RG_CLKDRV_AMP GENMASK(31, 29)
+#define P3A_RG_CLKDRV_AMP_VAL(x) ((0x7 & (x)) << 29)
+
+#define U3P_U3_PHYA_REG6 0x018
+#define P3A_RG_TX_EIDLE_CM GENMASK(31, 28)
+#define P3A_RG_TX_EIDLE_CM_VAL(x) ((0xf & (x)) << 28)
+
+#define U3P_U3_PHYA_REG9 0x024
+#define P3A_RG_RX_DAC_MUX GENMASK(5, 1)
+#define P3A_RG_RX_DAC_MUX_VAL(x) ((0x1f & (x)) << 1)
+
+#define U3P_U3_PHYA_DA_REG0 0x100
+#define P3A_RG_XTAL_EXT_PE2H GENMASK(17, 16)
+#define P3A_RG_XTAL_EXT_PE2H_VAL(x) ((0x3 & (x)) << 16)
+#define P3A_RG_XTAL_EXT_PE1H GENMASK(13, 12)
+#define P3A_RG_XTAL_EXT_PE1H_VAL(x) ((0x3 & (x)) << 12)
+#define P3A_RG_XTAL_EXT_EN_U3 GENMASK(11, 10)
+#define P3A_RG_XTAL_EXT_EN_U3_VAL(x) ((0x3 & (x)) << 10)
+
+#define U3P_U3_PHYA_DA_REG4 0x108
+#define P3A_RG_PLL_DIVEN_PE2H GENMASK(21, 19)
+#define P3A_RG_PLL_BC_PE2H GENMASK(7, 6)
+#define P3A_RG_PLL_BC_PE2H_VAL(x) ((0x3 & (x)) << 6)
+
+#define U3P_U3_PHYA_DA_REG5 0x10c
+#define P3A_RG_PLL_BR_PE2H GENMASK(29, 28)
+#define P3A_RG_PLL_BR_PE2H_VAL(x) ((0x3 & (x)) << 28)
+#define P3A_RG_PLL_IC_PE2H GENMASK(15, 12)
+#define P3A_RG_PLL_IC_PE2H_VAL(x) ((0xf & (x)) << 12)
+
+#define U3P_U3_PHYA_DA_REG6 0x110
+#define P3A_RG_PLL_IR_PE2H GENMASK(19, 16)
+#define P3A_RG_PLL_IR_PE2H_VAL(x) ((0xf & (x)) << 16)
+
+#define U3P_U3_PHYA_DA_REG7 0x114
+#define P3A_RG_PLL_BP_PE2H GENMASK(19, 16)
+#define P3A_RG_PLL_BP_PE2H_VAL(x) ((0xf & (x)) << 16)
+
+#define U3P_U3_PHYA_DA_REG20 0x13c
+#define P3A_RG_PLL_DELTA1_PE2H GENMASK(31, 16)
+#define P3A_RG_PLL_DELTA1_PE2H_VAL(x) ((0xffff & (x)) << 16)
+
+#define U3P_U3_PHYA_DA_REG25 0x148
+#define P3A_RG_PLL_DELTA_PE2H GENMASK(15, 0)
+#define P3A_RG_PLL_DELTA_PE2H_VAL(x) (0xffff & (x))
+
+#define U3P_U3_PHYD_LFPS1 0x00c
+#define P3D_RG_FWAKE_TH GENMASK(21, 16)
+#define P3D_RG_FWAKE_TH_VAL(x) ((0x3f & (x)) << 16)
+
+#define U3P_U3_PHYD_CDR1 0x05c
+#define P3D_RG_CDR_BIR_LTD1 GENMASK(28, 24)
+#define P3D_RG_CDR_BIR_LTD1_VAL(x) ((0x1f & (x)) << 24)
+#define P3D_RG_CDR_BIR_LTD0 GENMASK(12, 8)
+#define P3D_RG_CDR_BIR_LTD0_VAL(x) ((0x1f & (x)) << 8)
+
+#define U3P_U3_PHYD_RXDET1 0x128
+#define P3D_RG_RXDET_STB2_SET GENMASK(17, 9)
+#define P3D_RG_RXDET_STB2_SET_VAL(x) ((0x1ff & (x)) << 9)
+
+#define U3P_U3_PHYD_RXDET2 0x12c
+#define P3D_RG_RXDET_STB2_SET_P3 GENMASK(8, 0)
+#define P3D_RG_RXDET_STB2_SET_P3_VAL(x) (0x1ff & (x))
+
+#define U3P_SPLLC_XTALCTL3 0x018
+#define XC3_RG_U3_XTAL_RX_PWD BIT(9)
+#define XC3_RG_U3_FRC_XTAL_RX_PWD BIT(8)
+
+#define U3P_U2FREQ_FMCR0 0x00
+#define P2F_RG_MONCLK_SEL GENMASK(27, 26)
+#define P2F_RG_MONCLK_SEL_VAL(x) ((0x3 & (x)) << 26)
+#define P2F_RG_FREQDET_EN BIT(24)
+#define P2F_RG_CYCLECNT GENMASK(23, 0)
+#define P2F_RG_CYCLECNT_VAL(x) ((P2F_RG_CYCLECNT) & (x))
+
+#define U3P_U2FREQ_VALUE 0x0c
+
+#define U3P_U2FREQ_FMMONR1 0x10
+#define P2F_USB_FM_VALID BIT(0)
+#define P2F_RG_FRCK_EN BIT(8)
+
+#define U3P_REF_CLK 26 /* MHZ */
+#define U3P_SLEW_RATE_COEF 28
+#define U3P_SR_COEF_DIVISOR 1000
+#define U3P_FM_DET_CYCLE_CNT 1024
+
+/* SATA register setting */
+#define PHYD_CTRL_SIGNAL_MODE4 0x1c
+/* CDR Charge Pump P-path current adjustment */
+#define RG_CDR_BICLTD1_GEN1_MSK GENMASK(23, 20)
+#define RG_CDR_BICLTD1_GEN1_VAL(x) ((0xf & (x)) << 20)
+#define RG_CDR_BICLTD0_GEN1_MSK GENMASK(11, 8)
+#define RG_CDR_BICLTD0_GEN1_VAL(x) ((0xf & (x)) << 8)
+
+#define PHYD_DESIGN_OPTION2 0x24
+/* Symbol lock count selection */
+#define RG_LOCK_CNT_SEL_MSK GENMASK(5, 4)
+#define RG_LOCK_CNT_SEL_VAL(x) ((0x3 & (x)) << 4)
+
+#define PHYD_DESIGN_OPTION9 0x40
+/* COMWAK GAP width window */
+#define RG_TG_MAX_MSK GENMASK(20, 16)
+#define RG_TG_MAX_VAL(x) ((0x1f & (x)) << 16)
+/* COMINIT GAP width window */
+#define RG_T2_MAX_MSK GENMASK(13, 8)
+#define RG_T2_MAX_VAL(x) ((0x3f & (x)) << 8)
+/* COMWAK GAP width window */
+#define RG_TG_MIN_MSK GENMASK(7, 5)
+#define RG_TG_MIN_VAL(x) ((0x7 & (x)) << 5)
+/* COMINIT GAP width window */
+#define RG_T2_MIN_MSK GENMASK(4, 0)
+#define RG_T2_MIN_VAL(x) (0x1f & (x))
+
+#define ANA_RG_CTRL_SIGNAL1 0x4c
+/* TX driver tail current control for 0dB de-empahsis mdoe for Gen1 speed */
+#define RG_IDRV_0DB_GEN1_MSK GENMASK(13, 8)
+#define RG_IDRV_0DB_GEN1_VAL(x) ((0x3f & (x)) << 8)
+
+#define ANA_RG_CTRL_SIGNAL4 0x58
+#define RG_CDR_BICLTR_GEN1_MSK GENMASK(23, 20)
+#define RG_CDR_BICLTR_GEN1_VAL(x) ((0xf & (x)) << 20)
+/* Loop filter R1 resistance adjustment for Gen1 speed */
+#define RG_CDR_BR_GEN2_MSK GENMASK(10, 8)
+#define RG_CDR_BR_GEN2_VAL(x) ((0x7 & (x)) << 8)
+
+#define ANA_RG_CTRL_SIGNAL6 0x60
+/* I-path capacitance adjustment for Gen1 */
+#define RG_CDR_BC_GEN1_MSK GENMASK(28, 24)
+#define RG_CDR_BC_GEN1_VAL(x) ((0x1f & (x)) << 24)
+#define RG_CDR_BIRLTR_GEN1_MSK GENMASK(4, 0)
+#define RG_CDR_BIRLTR_GEN1_VAL(x) (0x1f & (x))
+
+#define ANA_EQ_EYE_CTRL_SIGNAL1 0x6c
+/* RX Gen1 LEQ tuning step */
+#define RG_EQ_DLEQ_LFI_GEN1_MSK GENMASK(11, 8)
+#define RG_EQ_DLEQ_LFI_GEN1_VAL(x) ((0xf & (x)) << 8)
+
+#define ANA_EQ_EYE_CTRL_SIGNAL4 0xd8
+#define RG_CDR_BIRLTD0_GEN1_MSK GENMASK(20, 16)
+#define RG_CDR_BIRLTD0_GEN1_VAL(x) ((0x1f & (x)) << 16)
+
+#define ANA_EQ_EYE_CTRL_SIGNAL5 0xdc
+#define RG_CDR_BIRLTD0_GEN3_MSK GENMASK(4, 0)
+#define RG_CDR_BIRLTD0_GEN3_VAL(x) (0x1f & (x))
+
+enum mtk_phy_version {
+ MTK_PHY_V1 = 1,
+ MTK_PHY_V2,
+};
+
+struct mtk_phy_pdata {
+ /* avoid RX sensitivity level degradation only for mt8173 */
+ bool avoid_rx_sen_degradation;
+ enum mtk_phy_version version;
+};
+
+struct u2phy_banks {
+ void __iomem *misc;
+ void __iomem *fmreg;
+ void __iomem *com;
+};
+
+struct u3phy_banks {
+ void __iomem *spllc;
+ void __iomem *chip;
+ void __iomem *phyd; /* include u3phyd_bank2 */
+ void __iomem *phya; /* include u3phya_da */
+};
+
+struct mtk_phy_instance {
+ struct phy *phy;
+ void __iomem *port_base;
+ union {
+ struct u2phy_banks u2_banks;
+ struct u3phy_banks u3_banks;
+ };
+ struct clk *ref_clk; /* reference clock of anolog phy */
+ u32 index;
+ u8 type;
+};
+
+struct mtk_tphy {
+ struct device *dev;
+ void __iomem *sif_base; /* only shared sif */
+ /* deprecated, use @ref_clk instead in phy instance */
+ struct clk *u3phya_ref; /* reference clock of usb3 anolog phy */
+ const struct mtk_phy_pdata *pdata;
+ struct mtk_phy_instance **phys;
+ int nphys;
+};
+
+static void hs_slew_rate_calibrate(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u2phy_banks *u2_banks = &instance->u2_banks;
+ void __iomem *fmreg = u2_banks->fmreg;
+ void __iomem *com = u2_banks->com;
+ int calibration_val;
+ int fm_out;
+ u32 tmp;
+
+ /* enable USB ring oscillator */
+ tmp = readl(com + U3P_USBPHYACR5);
+ tmp |= PA5_RG_U2_HSTX_SRCAL_EN;
+ writel(tmp, com + U3P_USBPHYACR5);
+ udelay(1);
+
+ /*enable free run clock */
+ tmp = readl(fmreg + U3P_U2FREQ_FMMONR1);
+ tmp |= P2F_RG_FRCK_EN;
+ writel(tmp, fmreg + U3P_U2FREQ_FMMONR1);
+
+ /* set cycle count as 1024, and select u2 channel */
+ tmp = readl(fmreg + U3P_U2FREQ_FMCR0);
+ tmp &= ~(P2F_RG_CYCLECNT | P2F_RG_MONCLK_SEL);
+ tmp |= P2F_RG_CYCLECNT_VAL(U3P_FM_DET_CYCLE_CNT);
+ if (tphy->pdata->version == MTK_PHY_V1)
+ tmp |= P2F_RG_MONCLK_SEL_VAL(instance->index >> 1);
+
+ writel(tmp, fmreg + U3P_U2FREQ_FMCR0);
+
+ /* enable frequency meter */
+ tmp = readl(fmreg + U3P_U2FREQ_FMCR0);
+ tmp |= P2F_RG_FREQDET_EN;
+ writel(tmp, fmreg + U3P_U2FREQ_FMCR0);
+
+ /* ignore return value */
+ readl_poll_timeout(fmreg + U3P_U2FREQ_FMMONR1, tmp,
+ (tmp & P2F_USB_FM_VALID), 10, 200);
+
+ fm_out = readl(fmreg + U3P_U2FREQ_VALUE);
+
+ /* disable frequency meter */
+ tmp = readl(fmreg + U3P_U2FREQ_FMCR0);
+ tmp &= ~P2F_RG_FREQDET_EN;
+ writel(tmp, fmreg + U3P_U2FREQ_FMCR0);
+
+ /*disable free run clock */
+ tmp = readl(fmreg + U3P_U2FREQ_FMMONR1);
+ tmp &= ~P2F_RG_FRCK_EN;
+ writel(tmp, fmreg + U3P_U2FREQ_FMMONR1);
+
+ if (fm_out) {
+ /* ( 1024 / FM_OUT ) x reference clock frequency x 0.028 */
+ tmp = U3P_FM_DET_CYCLE_CNT * U3P_REF_CLK * U3P_SLEW_RATE_COEF;
+ tmp /= fm_out;
+ calibration_val = DIV_ROUND_CLOSEST(tmp, U3P_SR_COEF_DIVISOR);
+ } else {
+ /* if FM detection fail, set default value */
+ calibration_val = 4;
+ }
+ dev_dbg(tphy->dev, "phy:%d, fm_out:%d, calib:%d\n",
+ instance->index, fm_out, calibration_val);
+
+ /* set HS slew rate */
+ tmp = readl(com + U3P_USBPHYACR5);
+ tmp &= ~PA5_RG_U2_HSTX_SRCTRL;
+ tmp |= PA5_RG_U2_HSTX_SRCTRL_VAL(calibration_val);
+ writel(tmp, com + U3P_USBPHYACR5);
+
+ /* disable USB ring oscillator */
+ tmp = readl(com + U3P_USBPHYACR5);
+ tmp &= ~PA5_RG_U2_HSTX_SRCAL_EN;
+ writel(tmp, com + U3P_USBPHYACR5);
+}
+
+static void u3_phy_instance_init(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u3phy_banks *u3_banks = &instance->u3_banks;
+ u32 tmp;
+
+ /* gating PCIe Analog XTAL clock */
+ tmp = readl(u3_banks->spllc + U3P_SPLLC_XTALCTL3);
+ tmp |= XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD;
+ writel(tmp, u3_banks->spllc + U3P_SPLLC_XTALCTL3);
+
+ /* gating XSQ */
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG0);
+ tmp &= ~P3A_RG_XTAL_EXT_EN_U3;
+ tmp |= P3A_RG_XTAL_EXT_EN_U3_VAL(2);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG0);
+
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG9);
+ tmp &= ~P3A_RG_RX_DAC_MUX;
+ tmp |= P3A_RG_RX_DAC_MUX_VAL(4);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_REG9);
+
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG6);
+ tmp &= ~P3A_RG_TX_EIDLE_CM;
+ tmp |= P3A_RG_TX_EIDLE_CM_VAL(0xe);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_REG6);
+
+ tmp = readl(u3_banks->phyd + U3P_U3_PHYD_CDR1);
+ tmp &= ~(P3D_RG_CDR_BIR_LTD0 | P3D_RG_CDR_BIR_LTD1);
+ tmp |= P3D_RG_CDR_BIR_LTD0_VAL(0xc) | P3D_RG_CDR_BIR_LTD1_VAL(0x3);
+ writel(tmp, u3_banks->phyd + U3P_U3_PHYD_CDR1);
+
+ tmp = readl(u3_banks->phyd + U3P_U3_PHYD_LFPS1);
+ tmp &= ~P3D_RG_FWAKE_TH;
+ tmp |= P3D_RG_FWAKE_TH_VAL(0x34);
+ writel(tmp, u3_banks->phyd + U3P_U3_PHYD_LFPS1);
+
+ tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RXDET1);
+ tmp &= ~P3D_RG_RXDET_STB2_SET;
+ tmp |= P3D_RG_RXDET_STB2_SET_VAL(0x10);
+ writel(tmp, u3_banks->phyd + U3P_U3_PHYD_RXDET1);
+
+ tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RXDET2);
+ tmp &= ~P3D_RG_RXDET_STB2_SET_P3;
+ tmp |= P3D_RG_RXDET_STB2_SET_P3_VAL(0x10);
+ writel(tmp, u3_banks->phyd + U3P_U3_PHYD_RXDET2);
+
+ dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index);
+}
+
+static void u2_phy_instance_init(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u2phy_banks *u2_banks = &instance->u2_banks;
+ void __iomem *com = u2_banks->com;
+ u32 index = instance->index;
+ u32 tmp;
+
+ /* switch to USB function. (system register, force ip into usb mode) */
+ tmp = readl(com + U3P_U2PHYDTM0);
+ tmp &= ~P2C_FORCE_UART_EN;
+ tmp |= P2C_RG_XCVRSEL_VAL(1) | P2C_RG_DATAIN_VAL(0);
+ writel(tmp, com + U3P_U2PHYDTM0);
+
+ tmp = readl(com + U3P_U2PHYDTM1);
+ tmp &= ~P2C_RG_UART_EN;
+ writel(tmp, com + U3P_U2PHYDTM1);
+
+ tmp = readl(com + U3P_USBPHYACR0);
+ tmp |= PA0_RG_USB20_INTR_EN;
+ writel(tmp, com + U3P_USBPHYACR0);
+
+ /* disable switch 100uA current to SSUSB */
+ tmp = readl(com + U3P_USBPHYACR5);
+ tmp &= ~PA5_RG_U2_HS_100U_U3_EN;
+ writel(tmp, com + U3P_USBPHYACR5);
+
+ if (!index) {
+ tmp = readl(com + U3P_U2PHYACR4);
+ tmp &= ~P2C_U2_GPIO_CTR_MSK;
+ writel(tmp, com + U3P_U2PHYACR4);
+ }
+
+ if (tphy->pdata->avoid_rx_sen_degradation) {
+ if (!index) {
+ tmp = readl(com + U3P_USBPHYACR2);
+ tmp |= PA2_RG_SIF_U2PLL_FORCE_EN;
+ writel(tmp, com + U3P_USBPHYACR2);
+
+ tmp = readl(com + U3D_U2PHYDCR0);
+ tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
+ writel(tmp, com + U3D_U2PHYDCR0);
+ } else {
+ tmp = readl(com + U3D_U2PHYDCR0);
+ tmp |= P2C_RG_SIF_U2PLL_FORCE_ON;
+ writel(tmp, com + U3D_U2PHYDCR0);
+
+ tmp = readl(com + U3P_U2PHYDTM0);
+ tmp |= P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM;
+ writel(tmp, com + U3P_U2PHYDTM0);
+ }
+ }
+
+ tmp = readl(com + U3P_USBPHYACR6);
+ tmp &= ~PA6_RG_U2_BC11_SW_EN; /* DP/DM BC1.1 path Disable */
+ tmp &= ~PA6_RG_U2_SQTH;
+ tmp |= PA6_RG_U2_SQTH_VAL(2);
+ writel(tmp, com + U3P_USBPHYACR6);
+
+ dev_dbg(tphy->dev, "%s(%d)\n", __func__, index);
+}
+
+static void u2_phy_instance_power_on(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u2phy_banks *u2_banks = &instance->u2_banks;
+ void __iomem *com = u2_banks->com;
+ u32 index = instance->index;
+ u32 tmp;
+
+ /* (force_suspendm=0) (let suspendm=1, enable usb 480MHz pll) */
+ tmp = readl(com + U3P_U2PHYDTM0);
+ tmp &= ~(P2C_FORCE_SUSPENDM | P2C_RG_XCVRSEL);
+ tmp &= ~(P2C_RG_DATAIN | P2C_DTM0_PART_MASK);
+ writel(tmp, com + U3P_U2PHYDTM0);
+
+ /* OTG Enable */
+ tmp = readl(com + U3P_USBPHYACR6);
+ tmp |= PA6_RG_U2_OTG_VBUSCMP_EN;
+ writel(tmp, com + U3P_USBPHYACR6);
+
+ tmp = readl(com + U3P_U2PHYDTM1);
+ tmp |= P2C_RG_VBUSVALID | P2C_RG_AVALID;
+ tmp &= ~P2C_RG_SESSEND;
+ writel(tmp, com + U3P_U2PHYDTM1);
+
+ if (tphy->pdata->avoid_rx_sen_degradation && index) {
+ tmp = readl(com + U3D_U2PHYDCR0);
+ tmp |= P2C_RG_SIF_U2PLL_FORCE_ON;
+ writel(tmp, com + U3D_U2PHYDCR0);
+
+ tmp = readl(com + U3P_U2PHYDTM0);
+ tmp |= P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM;
+ writel(tmp, com + U3P_U2PHYDTM0);
+ }
+ dev_dbg(tphy->dev, "%s(%d)\n", __func__, index);
+}
+
+static void u2_phy_instance_power_off(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u2phy_banks *u2_banks = &instance->u2_banks;
+ void __iomem *com = u2_banks->com;
+ u32 index = instance->index;
+ u32 tmp;
+
+ tmp = readl(com + U3P_U2PHYDTM0);
+ tmp &= ~(P2C_RG_XCVRSEL | P2C_RG_DATAIN);
+ tmp |= P2C_FORCE_SUSPENDM;
+ writel(tmp, com + U3P_U2PHYDTM0);
+
+ /* OTG Disable */
+ tmp = readl(com + U3P_USBPHYACR6);
+ tmp &= ~PA6_RG_U2_OTG_VBUSCMP_EN;
+ writel(tmp, com + U3P_USBPHYACR6);
+
+ /* let suspendm=0, set utmi into analog power down */
+ tmp = readl(com + U3P_U2PHYDTM0);
+ tmp &= ~P2C_RG_SUSPENDM;
+ writel(tmp, com + U3P_U2PHYDTM0);
+ udelay(1);
+
+ tmp = readl(com + U3P_U2PHYDTM1);
+ tmp &= ~(P2C_RG_VBUSVALID | P2C_RG_AVALID);
+ tmp |= P2C_RG_SESSEND;
+ writel(tmp, com + U3P_U2PHYDTM1);
+
+ if (tphy->pdata->avoid_rx_sen_degradation && index) {
+ tmp = readl(com + U3D_U2PHYDCR0);
+ tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
+ writel(tmp, com + U3D_U2PHYDCR0);
+ }
+
+ dev_dbg(tphy->dev, "%s(%d)\n", __func__, index);
+}
+
+static void u2_phy_instance_exit(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u2phy_banks *u2_banks = &instance->u2_banks;
+ void __iomem *com = u2_banks->com;
+ u32 index = instance->index;
+ u32 tmp;
+
+ if (tphy->pdata->avoid_rx_sen_degradation && index) {
+ tmp = readl(com + U3D_U2PHYDCR0);
+ tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
+ writel(tmp, com + U3D_U2PHYDCR0);
+
+ tmp = readl(com + U3P_U2PHYDTM0);
+ tmp &= ~P2C_FORCE_SUSPENDM;
+ writel(tmp, com + U3P_U2PHYDTM0);
+ }
+}
+
+static void pcie_phy_instance_init(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u3phy_banks *u3_banks = &instance->u3_banks;
+ u32 tmp;
+
+ if (tphy->pdata->version != MTK_PHY_V1)
+ return;
+
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG0);
+ tmp &= ~(P3A_RG_XTAL_EXT_PE1H | P3A_RG_XTAL_EXT_PE2H);
+ tmp |= P3A_RG_XTAL_EXT_PE1H_VAL(0x2) | P3A_RG_XTAL_EXT_PE2H_VAL(0x2);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG0);
+
+ /* ref clk drive */
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG1);
+ tmp &= ~P3A_RG_CLKDRV_AMP;
+ tmp |= P3A_RG_CLKDRV_AMP_VAL(0x4);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_REG1);
+
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG0);
+ tmp &= ~P3A_RG_CLKDRV_OFF;
+ tmp |= P3A_RG_CLKDRV_OFF_VAL(0x1);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_REG0);
+
+ /* SSC delta -5000ppm */
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG20);
+ tmp &= ~P3A_RG_PLL_DELTA1_PE2H;
+ tmp |= P3A_RG_PLL_DELTA1_PE2H_VAL(0x3c);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG20);
+
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG25);
+ tmp &= ~P3A_RG_PLL_DELTA_PE2H;
+ tmp |= P3A_RG_PLL_DELTA_PE2H_VAL(0x36);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG25);
+
+ /* change pll BW 0.6M */
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG5);
+ tmp &= ~(P3A_RG_PLL_BR_PE2H | P3A_RG_PLL_IC_PE2H);
+ tmp |= P3A_RG_PLL_BR_PE2H_VAL(0x1) | P3A_RG_PLL_IC_PE2H_VAL(0x1);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG5);
+
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG4);
+ tmp &= ~(P3A_RG_PLL_DIVEN_PE2H | P3A_RG_PLL_BC_PE2H);
+ tmp |= P3A_RG_PLL_BC_PE2H_VAL(0x3);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG4);
+
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG6);
+ tmp &= ~P3A_RG_PLL_IR_PE2H;
+ tmp |= P3A_RG_PLL_IR_PE2H_VAL(0x2);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG6);
+
+ tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG7);
+ tmp &= ~P3A_RG_PLL_BP_PE2H;
+ tmp |= P3A_RG_PLL_BP_PE2H_VAL(0xa);
+ writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG7);
+
+ /* Tx Detect Rx Timing: 10us -> 5us */
+ tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RXDET1);
+ tmp &= ~P3D_RG_RXDET_STB2_SET;
+ tmp |= P3D_RG_RXDET_STB2_SET_VAL(0x10);
+ writel(tmp, u3_banks->phyd + U3P_U3_PHYD_RXDET1);
+
+ tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RXDET2);
+ tmp &= ~P3D_RG_RXDET_STB2_SET_P3;
+ tmp |= P3D_RG_RXDET_STB2_SET_P3_VAL(0x10);
+ writel(tmp, u3_banks->phyd + U3P_U3_PHYD_RXDET2);
+
+ /* wait for PCIe subsys register to active */
+ usleep_range(2500, 3000);
+ dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index);
+}
+
+static void pcie_phy_instance_power_on(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u3phy_banks *bank = &instance->u3_banks;
+ u32 tmp;
+
+ tmp = readl(bank->chip + U3P_U3_CHIP_GPIO_CTLD);
+ tmp &= ~(P3C_FORCE_IP_SW_RST | P3C_MCU_BUS_CK_GATE_EN |
+ P3C_REG_IP_SW_RST);
+ writel(tmp, bank->chip + U3P_U3_CHIP_GPIO_CTLD);
+
+ tmp = readl(bank->chip + U3P_U3_CHIP_GPIO_CTLE);
+ tmp &= ~(P3C_RG_SWRST_U3_PHYD_FORCE_EN | P3C_RG_SWRST_U3_PHYD);
+ writel(tmp, bank->chip + U3P_U3_CHIP_GPIO_CTLE);
+}
+
+static void pcie_phy_instance_power_off(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+
+{
+ struct u3phy_banks *bank = &instance->u3_banks;
+ u32 tmp;
+
+ tmp = readl(bank->chip + U3P_U3_CHIP_GPIO_CTLD);
+ tmp |= P3C_FORCE_IP_SW_RST | P3C_REG_IP_SW_RST;
+ writel(tmp, bank->chip + U3P_U3_CHIP_GPIO_CTLD);
+
+ tmp = readl(bank->chip + U3P_U3_CHIP_GPIO_CTLE);
+ tmp |= P3C_RG_SWRST_U3_PHYD_FORCE_EN | P3C_RG_SWRST_U3_PHYD;
+ writel(tmp, bank->chip + U3P_U3_CHIP_GPIO_CTLE);
+}
+
+static void sata_phy_instance_init(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u3phy_banks *u3_banks = &instance->u3_banks;
+ void __iomem *phyd = u3_banks->phyd;
+ u32 tmp;
+
+ /* charge current adjustment */
+ tmp = readl(phyd + ANA_RG_CTRL_SIGNAL6);
+ tmp &= ~(RG_CDR_BIRLTR_GEN1_MSK | RG_CDR_BC_GEN1_MSK);
+ tmp |= RG_CDR_BIRLTR_GEN1_VAL(0x6) | RG_CDR_BC_GEN1_VAL(0x1a);
+ writel(tmp, phyd + ANA_RG_CTRL_SIGNAL6);
+
+ tmp = readl(phyd + ANA_EQ_EYE_CTRL_SIGNAL4);
+ tmp &= ~RG_CDR_BIRLTD0_GEN1_MSK;
+ tmp |= RG_CDR_BIRLTD0_GEN1_VAL(0x18);
+ writel(tmp, phyd + ANA_EQ_EYE_CTRL_SIGNAL4);
+
+ tmp = readl(phyd + ANA_EQ_EYE_CTRL_SIGNAL5);
+ tmp &= ~RG_CDR_BIRLTD0_GEN3_MSK;
+ tmp |= RG_CDR_BIRLTD0_GEN3_VAL(0x06);
+ writel(tmp, phyd + ANA_EQ_EYE_CTRL_SIGNAL5);
+
+ tmp = readl(phyd + ANA_RG_CTRL_SIGNAL4);
+ tmp &= ~(RG_CDR_BICLTR_GEN1_MSK | RG_CDR_BR_GEN2_MSK);
+ tmp |= RG_CDR_BICLTR_GEN1_VAL(0x0c) | RG_CDR_BR_GEN2_VAL(0x07);
+ writel(tmp, phyd + ANA_RG_CTRL_SIGNAL4);
+
+ tmp = readl(phyd + PHYD_CTRL_SIGNAL_MODE4);
+ tmp &= ~(RG_CDR_BICLTD0_GEN1_MSK | RG_CDR_BICLTD1_GEN1_MSK);
+ tmp |= RG_CDR_BICLTD0_GEN1_VAL(0x08) | RG_CDR_BICLTD1_GEN1_VAL(0x02);
+ writel(tmp, phyd + PHYD_CTRL_SIGNAL_MODE4);
+
+ tmp = readl(phyd + PHYD_DESIGN_OPTION2);
+ tmp &= ~RG_LOCK_CNT_SEL_MSK;
+ tmp |= RG_LOCK_CNT_SEL_VAL(0x02);
+ writel(tmp, phyd + PHYD_DESIGN_OPTION2);
+
+ tmp = readl(phyd + PHYD_DESIGN_OPTION9);
+ tmp &= ~(RG_T2_MIN_MSK | RG_TG_MIN_MSK |
+ RG_T2_MAX_MSK | RG_TG_MAX_MSK);
+ tmp |= RG_T2_MIN_VAL(0x12) | RG_TG_MIN_VAL(0x04) |
+ RG_T2_MAX_VAL(0x31) | RG_TG_MAX_VAL(0x0e);
+ writel(tmp, phyd + PHYD_DESIGN_OPTION9);
+
+ tmp = readl(phyd + ANA_RG_CTRL_SIGNAL1);
+ tmp &= ~RG_IDRV_0DB_GEN1_MSK;
+ tmp |= RG_IDRV_0DB_GEN1_VAL(0x20);
+ writel(tmp, phyd + ANA_RG_CTRL_SIGNAL1);
+
+ tmp = readl(phyd + ANA_EQ_EYE_CTRL_SIGNAL1);
+ tmp &= ~RG_EQ_DLEQ_LFI_GEN1_MSK;
+ tmp |= RG_EQ_DLEQ_LFI_GEN1_VAL(0x03);
+ writel(tmp, phyd + ANA_EQ_EYE_CTRL_SIGNAL1);
+
+ dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index);
+}
+
+static void phy_v1_banks_init(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u2phy_banks *u2_banks = &instance->u2_banks;
+ struct u3phy_banks *u3_banks = &instance->u3_banks;
+
+ switch (instance->type) {
+ case PHY_TYPE_USB2:
+ u2_banks->misc = NULL;
+ u2_banks->fmreg = tphy->sif_base + SSUSB_SIFSLV_V1_U2FREQ;
+ u2_banks->com = instance->port_base + SSUSB_SIFSLV_V1_U2PHY_COM;
+ break;
+ case PHY_TYPE_USB3:
+ case PHY_TYPE_PCIE:
+ u3_banks->spllc = tphy->sif_base + SSUSB_SIFSLV_V1_SPLLC;
+ u3_banks->chip = NULL;
+ u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD;
+ u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V1_U3PHYA;
+ break;
+ case PHY_TYPE_SATA:
+ u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD;
+ break;
+ default:
+ dev_err(tphy->dev, "incompatible PHY type\n");
+ return;
+ }
+}
+
+static void phy_v2_banks_init(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u2phy_banks *u2_banks = &instance->u2_banks;
+ struct u3phy_banks *u3_banks = &instance->u3_banks;
+
+ switch (instance->type) {
+ case PHY_TYPE_USB2:
+ u2_banks->misc = instance->port_base + SSUSB_SIFSLV_V2_MISC;
+ u2_banks->fmreg = instance->port_base + SSUSB_SIFSLV_V2_U2FREQ;
+ u2_banks->com = instance->port_base + SSUSB_SIFSLV_V2_U2PHY_COM;
+ break;
+ case PHY_TYPE_USB3:
+ case PHY_TYPE_PCIE:
+ u3_banks->spllc = instance->port_base + SSUSB_SIFSLV_V2_SPLLC;
+ u3_banks->chip = instance->port_base + SSUSB_SIFSLV_V2_CHIP;
+ u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V2_U3PHYD;
+ u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V2_U3PHYA;
+ break;
+ default:
+ dev_err(tphy->dev, "incompatible PHY type\n");
+ return;
+ }
+}
+
+static int mtk_phy_init(struct phy *phy)
+{
+ struct mtk_phy_instance *instance = phy_get_drvdata(phy);
+ struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
+ int ret;
+
+ ret = clk_prepare_enable(tphy->u3phya_ref);
+ if (ret) {
+ dev_err(tphy->dev, "failed to enable u3phya_ref\n");
+ return ret;
+ }
+
+ ret = clk_prepare_enable(instance->ref_clk);
+ if (ret) {
+ dev_err(tphy->dev, "failed to enable ref_clk\n");
+ return ret;
+ }
+
+ switch (instance->type) {
+ case PHY_TYPE_USB2:
+ u2_phy_instance_init(tphy, instance);
+ break;
+ case PHY_TYPE_USB3:
+ u3_phy_instance_init(tphy, instance);
+ break;
+ case PHY_TYPE_PCIE:
+ pcie_phy_instance_init(tphy, instance);
+ break;
+ case PHY_TYPE_SATA:
+ sata_phy_instance_init(tphy, instance);
+ break;
+ default:
+ dev_err(tphy->dev, "incompatible PHY type\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int mtk_phy_power_on(struct phy *phy)
+{
+ struct mtk_phy_instance *instance = phy_get_drvdata(phy);
+ struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
+
+ if (instance->type == PHY_TYPE_USB2) {
+ u2_phy_instance_power_on(tphy, instance);
+ hs_slew_rate_calibrate(tphy, instance);
+ } else if (instance->type == PHY_TYPE_PCIE) {
+ pcie_phy_instance_power_on(tphy, instance);
+ }
+
+ return 0;
+}
+
+static int mtk_phy_power_off(struct phy *phy)
+{
+ struct mtk_phy_instance *instance = phy_get_drvdata(phy);
+ struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
+
+ if (instance->type == PHY_TYPE_USB2)
+ u2_phy_instance_power_off(tphy, instance);
+ else if (instance->type == PHY_TYPE_PCIE)
+ pcie_phy_instance_power_off(tphy, instance);
+
+ return 0;
+}
+
+static int mtk_phy_exit(struct phy *phy)
+{
+ struct mtk_phy_instance *instance = phy_get_drvdata(phy);
+ struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
+
+ if (instance->type == PHY_TYPE_USB2)
+ u2_phy_instance_exit(tphy, instance);
+
+ clk_disable_unprepare(instance->ref_clk);
+ clk_disable_unprepare(tphy->u3phya_ref);
+ return 0;
+}
+
+static struct phy *mtk_phy_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct mtk_tphy *tphy = dev_get_drvdata(dev);
+ struct mtk_phy_instance *instance = NULL;
+ struct device_node *phy_np = args->np;
+ int index;
+
+ if (args->args_count != 1) {
+ dev_err(dev, "invalid number of cells in 'phy' property\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ for (index = 0; index < tphy->nphys; index++)
+ if (phy_np == tphy->phys[index]->phy->dev.of_node) {
+ instance = tphy->phys[index];
+ break;
+ }
+
+ if (!instance) {
+ dev_err(dev, "failed to find appropriate phy\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ instance->type = args->args[0];
+ if (!(instance->type == PHY_TYPE_USB2 ||
+ instance->type == PHY_TYPE_USB3 ||
+ instance->type == PHY_TYPE_PCIE ||
+ instance->type == PHY_TYPE_SATA)) {
+ dev_err(dev, "unsupported device type: %d\n", instance->type);
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (tphy->pdata->version == MTK_PHY_V1) {
+ phy_v1_banks_init(tphy, instance);
+ } else if (tphy->pdata->version == MTK_PHY_V2) {
+ phy_v2_banks_init(tphy, instance);
+ } else {
+ dev_err(dev, "phy version is not supported\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ return instance->phy;
+}
+
+static const struct phy_ops mtk_tphy_ops = {
+ .init = mtk_phy_init,
+ .exit = mtk_phy_exit,
+ .power_on = mtk_phy_power_on,
+ .power_off = mtk_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static const struct mtk_phy_pdata tphy_v1_pdata = {
+ .avoid_rx_sen_degradation = false,
+ .version = MTK_PHY_V1,
+};
+
+static const struct mtk_phy_pdata tphy_v2_pdata = {
+ .avoid_rx_sen_degradation = false,
+ .version = MTK_PHY_V2,
+};
+
+static const struct mtk_phy_pdata mt8173_pdata = {
+ .avoid_rx_sen_degradation = true,
+ .version = MTK_PHY_V1,
+};
+
+static const struct of_device_id mtk_tphy_id_table[] = {
+ { .compatible = "mediatek,mt2701-u3phy", .data = &tphy_v1_pdata },
+ { .compatible = "mediatek,mt2712-u3phy", .data = &tphy_v2_pdata },
+ { .compatible = "mediatek,mt8173-u3phy", .data = &mt8173_pdata },
+ { .compatible = "mediatek,generic-tphy-v1", .data = &tphy_v1_pdata },
+ { .compatible = "mediatek,generic-tphy-v2", .data = &tphy_v2_pdata },
+ { },
+};
+MODULE_DEVICE_TABLE(of, mtk_tphy_id_table);
+
+static int mtk_tphy_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct device_node *child_np;
+ struct phy_provider *provider;
+ struct resource *sif_res;
+ struct mtk_tphy *tphy;
+ struct resource res;
+ int port, retval;
+
+ match = of_match_node(mtk_tphy_id_table, pdev->dev.of_node);
+ if (!match)
+ return -EINVAL;
+
+ tphy = devm_kzalloc(dev, sizeof(*tphy), GFP_KERNEL);
+ if (!tphy)
+ return -ENOMEM;
+
+ tphy->pdata = match->data;
+ tphy->nphys = of_get_child_count(np);
+ tphy->phys = devm_kcalloc(dev, tphy->nphys,
+ sizeof(*tphy->phys), GFP_KERNEL);
+ if (!tphy->phys)
+ return -ENOMEM;
+
+ tphy->dev = dev;
+ platform_set_drvdata(pdev, tphy);
+
+ if (tphy->pdata->version == MTK_PHY_V1) {
+ /* get banks shared by multiple phys */
+ sif_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ tphy->sif_base = devm_ioremap_resource(dev, sif_res);
+ if (IS_ERR(tphy->sif_base)) {
+ dev_err(dev, "failed to remap sif regs\n");
+ return PTR_ERR(tphy->sif_base);
+ }
+ }
+
+ /* it's deprecated, make it optional for backward compatibility */
+ tphy->u3phya_ref = devm_clk_get(dev, "u3phya_ref");
+ if (IS_ERR(tphy->u3phya_ref)) {
+ if (PTR_ERR(tphy->u3phya_ref) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ tphy->u3phya_ref = NULL;
+ }
+
+ port = 0;
+ for_each_child_of_node(np, child_np) {
+ struct mtk_phy_instance *instance;
+ struct phy *phy;
+
+ instance = devm_kzalloc(dev, sizeof(*instance), GFP_KERNEL);
+ if (!instance) {
+ retval = -ENOMEM;
+ goto put_child;
+ }
+
+ tphy->phys[port] = instance;
+
+ phy = devm_phy_create(dev, child_np, &mtk_tphy_ops);
+ if (IS_ERR(phy)) {
+ dev_err(dev, "failed to create phy\n");
+ retval = PTR_ERR(phy);
+ goto put_child;
+ }
+
+ retval = of_address_to_resource(child_np, 0, &res);
+ if (retval) {
+ dev_err(dev, "failed to get address resource(id-%d)\n",
+ port);
+ goto put_child;
+ }
+
+ instance->port_base = devm_ioremap_resource(&phy->dev, &res);
+ if (IS_ERR(instance->port_base)) {
+ dev_err(dev, "failed to remap phy regs\n");
+ retval = PTR_ERR(instance->port_base);
+ goto put_child;
+ }
+
+ instance->phy = phy;
+ instance->index = port;
+ phy_set_drvdata(phy, instance);
+ port++;
+
+ /* if deprecated clock is provided, ignore instance's one */
+ if (tphy->u3phya_ref)
+ continue;
+
+ instance->ref_clk = devm_clk_get(&phy->dev, "ref");
+ if (IS_ERR(instance->ref_clk)) {
+ dev_err(dev, "failed to get ref_clk(id-%d)\n", port);
+ retval = PTR_ERR(instance->ref_clk);
+ goto put_child;
+ }
+ }
+
+ provider = devm_of_phy_provider_register(dev, mtk_phy_xlate);
+
+ return PTR_ERR_OR_ZERO(provider);
+put_child:
+ of_node_put(child_np);
+ return retval;
+}
+
+static struct platform_driver mtk_tphy_driver = {
+ .probe = mtk_tphy_probe,
+ .driver = {
+ .name = "mtk-tphy",
+ .of_match_table = mtk_tphy_id_table,
+ },
+};
+
+module_platform_driver(mtk_tphy_driver);
+
+MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>");
+MODULE_DESCRIPTION("MediaTek T-PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/phy-mt65xx-usb3.c
deleted file mode 100644
index 45291c1..0000000
--- a/drivers/phy/phy-mt65xx-usb3.c
+++ /dev/null
@@ -1,1081 +0,0 @@
-/*
- * Copyright (c) 2015 MediaTek Inc.
- * Author: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <dt-bindings/phy/phy.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/iopoll.h>
-#include <linux/module.h>
-#include <linux/of_address.h>
-#include <linux/phy/phy.h>
-#include <linux/platform_device.h>
-
-/* version V1 sub-banks offset base address */
-/* banks shared by multiple phys */
-#define SSUSB_SIFSLV_V1_SPLLC 0x000 /* shared by u3 phys */
-#define SSUSB_SIFSLV_V1_U2FREQ 0x100 /* shared by u2 phys */
-/* u2 phy bank */
-#define SSUSB_SIFSLV_V1_U2PHY_COM 0x000
-/* u3/pcie/sata phy banks */
-#define SSUSB_SIFSLV_V1_U3PHYD 0x000
-#define SSUSB_SIFSLV_V1_U3PHYA 0x200
-
-/* version V2 sub-banks offset base address */
-/* u2 phy banks */
-#define SSUSB_SIFSLV_V2_MISC 0x000
-#define SSUSB_SIFSLV_V2_U2FREQ 0x100
-#define SSUSB_SIFSLV_V2_U2PHY_COM 0x300
-/* u3 phy banks */
-#define SSUSB_SIFSLV_V2_SPLLC 0x000
-#define SSUSB_SIFSLV_V2_CHIP 0x100
-#define SSUSB_SIFSLV_V2_U3PHYD 0x200
-#define SSUSB_SIFSLV_V2_U3PHYA 0x400
-
-#define U3P_USBPHYACR0 0x000
-#define PA0_RG_U2PLL_FORCE_ON BIT(15)
-#define PA0_RG_USB20_INTR_EN BIT(5)
-
-#define U3P_USBPHYACR2 0x008
-#define PA2_RG_SIF_U2PLL_FORCE_EN BIT(18)
-
-#define U3P_USBPHYACR5 0x014
-#define PA5_RG_U2_HSTX_SRCAL_EN BIT(15)
-#define PA5_RG_U2_HSTX_SRCTRL GENMASK(14, 12)
-#define PA5_RG_U2_HSTX_SRCTRL_VAL(x) ((0x7 & (x)) << 12)
-#define PA5_RG_U2_HS_100U_U3_EN BIT(11)
-
-#define U3P_USBPHYACR6 0x018
-#define PA6_RG_U2_BC11_SW_EN BIT(23)
-#define PA6_RG_U2_OTG_VBUSCMP_EN BIT(20)
-#define PA6_RG_U2_SQTH GENMASK(3, 0)
-#define PA6_RG_U2_SQTH_VAL(x) (0xf & (x))
-
-#define U3P_U2PHYACR4 0x020
-#define P2C_RG_USB20_GPIO_CTL BIT(9)
-#define P2C_USB20_GPIO_MODE BIT(8)
-#define P2C_U2_GPIO_CTR_MSK (P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE)
-
-#define U3D_U2PHYDCR0 0x060
-#define P2C_RG_SIF_U2PLL_FORCE_ON BIT(24)
-
-#define U3P_U2PHYDTM0 0x068
-#define P2C_FORCE_UART_EN BIT(26)
-#define P2C_FORCE_DATAIN BIT(23)
-#define P2C_FORCE_DM_PULLDOWN BIT(21)
-#define P2C_FORCE_DP_PULLDOWN BIT(20)
-#define P2C_FORCE_XCVRSEL BIT(19)
-#define P2C_FORCE_SUSPENDM BIT(18)
-#define P2C_FORCE_TERMSEL BIT(17)
-#define P2C_RG_DATAIN GENMASK(13, 10)
-#define P2C_RG_DATAIN_VAL(x) ((0xf & (x)) << 10)
-#define P2C_RG_DMPULLDOWN BIT(7)
-#define P2C_RG_DPPULLDOWN BIT(6)
-#define P2C_RG_XCVRSEL GENMASK(5, 4)
-#define P2C_RG_XCVRSEL_VAL(x) ((0x3 & (x)) << 4)
-#define P2C_RG_SUSPENDM BIT(3)
-#define P2C_RG_TERMSEL BIT(2)
-#define P2C_DTM0_PART_MASK \
- (P2C_FORCE_DATAIN | P2C_FORCE_DM_PULLDOWN | \
- P2C_FORCE_DP_PULLDOWN | P2C_FORCE_XCVRSEL | \
- P2C_FORCE_TERMSEL | P2C_RG_DMPULLDOWN | \
- P2C_RG_DPPULLDOWN | P2C_RG_TERMSEL)
-
-#define U3P_U2PHYDTM1 0x06C
-#define P2C_RG_UART_EN BIT(16)
-#define P2C_RG_VBUSVALID BIT(5)
-#define P2C_RG_SESSEND BIT(4)
-#define P2C_RG_AVALID BIT(2)
-
-#define U3P_U3_CHIP_GPIO_CTLD 0x0c
-#define P3C_REG_IP_SW_RST BIT(31)
-#define P3C_MCU_BUS_CK_GATE_EN BIT(30)
-#define P3C_FORCE_IP_SW_RST BIT(29)
-
-#define U3P_U3_CHIP_GPIO_CTLE 0x10
-#define P3C_RG_SWRST_U3_PHYD BIT(25)
-#define P3C_RG_SWRST_U3_PHYD_FORCE_EN BIT(24)
-
-#define U3P_U3_PHYA_REG0 0x000
-#define P3A_RG_CLKDRV_OFF GENMASK(3, 2)
-#define P3A_RG_CLKDRV_OFF_VAL(x) ((0x3 & (x)) << 2)
-
-#define U3P_U3_PHYA_REG1 0x004
-#define P3A_RG_CLKDRV_AMP GENMASK(31, 29)
-#define P3A_RG_CLKDRV_AMP_VAL(x) ((0x7 & (x)) << 29)
-
-#define U3P_U3_PHYA_REG6 0x018
-#define P3A_RG_TX_EIDLE_CM GENMASK(31, 28)
-#define P3A_RG_TX_EIDLE_CM_VAL(x) ((0xf & (x)) << 28)
-
-#define U3P_U3_PHYA_REG9 0x024
-#define P3A_RG_RX_DAC_MUX GENMASK(5, 1)
-#define P3A_RG_RX_DAC_MUX_VAL(x) ((0x1f & (x)) << 1)
-
-#define U3P_U3_PHYA_DA_REG0 0x100
-#define P3A_RG_XTAL_EXT_PE2H GENMASK(17, 16)
-#define P3A_RG_XTAL_EXT_PE2H_VAL(x) ((0x3 & (x)) << 16)
-#define P3A_RG_XTAL_EXT_PE1H GENMASK(13, 12)
-#define P3A_RG_XTAL_EXT_PE1H_VAL(x) ((0x3 & (x)) << 12)
-#define P3A_RG_XTAL_EXT_EN_U3 GENMASK(11, 10)
-#define P3A_RG_XTAL_EXT_EN_U3_VAL(x) ((0x3 & (x)) << 10)
-
-#define U3P_U3_PHYA_DA_REG4 0x108
-#define P3A_RG_PLL_DIVEN_PE2H GENMASK(21, 19)
-#define P3A_RG_PLL_BC_PE2H GENMASK(7, 6)
-#define P3A_RG_PLL_BC_PE2H_VAL(x) ((0x3 & (x)) << 6)
-
-#define U3P_U3_PHYA_DA_REG5 0x10c
-#define P3A_RG_PLL_BR_PE2H GENMASK(29, 28)
-#define P3A_RG_PLL_BR_PE2H_VAL(x) ((0x3 & (x)) << 28)
-#define P3A_RG_PLL_IC_PE2H GENMASK(15, 12)
-#define P3A_RG_PLL_IC_PE2H_VAL(x) ((0xf & (x)) << 12)
-
-#define U3P_U3_PHYA_DA_REG6 0x110
-#define P3A_RG_PLL_IR_PE2H GENMASK(19, 16)
-#define P3A_RG_PLL_IR_PE2H_VAL(x) ((0xf & (x)) << 16)
-
-#define U3P_U3_PHYA_DA_REG7 0x114
-#define P3A_RG_PLL_BP_PE2H GENMASK(19, 16)
-#define P3A_RG_PLL_BP_PE2H_VAL(x) ((0xf & (x)) << 16)
-
-#define U3P_U3_PHYA_DA_REG20 0x13c
-#define P3A_RG_PLL_DELTA1_PE2H GENMASK(31, 16)
-#define P3A_RG_PLL_DELTA1_PE2H_VAL(x) ((0xffff & (x)) << 16)
-
-#define U3P_U3_PHYA_DA_REG25 0x148
-#define P3A_RG_PLL_DELTA_PE2H GENMASK(15, 0)
-#define P3A_RG_PLL_DELTA_PE2H_VAL(x) (0xffff & (x))
-
-#define U3P_U3_PHYD_LFPS1 0x00c
-#define P3D_RG_FWAKE_TH GENMASK(21, 16)
-#define P3D_RG_FWAKE_TH_VAL(x) ((0x3f & (x)) << 16)
-
-#define U3P_U3_PHYD_CDR1 0x05c
-#define P3D_RG_CDR_BIR_LTD1 GENMASK(28, 24)
-#define P3D_RG_CDR_BIR_LTD1_VAL(x) ((0x1f & (x)) << 24)
-#define P3D_RG_CDR_BIR_LTD0 GENMASK(12, 8)
-#define P3D_RG_CDR_BIR_LTD0_VAL(x) ((0x1f & (x)) << 8)
-
-#define U3P_U3_PHYD_RXDET1 0x128
-#define P3D_RG_RXDET_STB2_SET GENMASK(17, 9)
-#define P3D_RG_RXDET_STB2_SET_VAL(x) ((0x1ff & (x)) << 9)
-
-#define U3P_U3_PHYD_RXDET2 0x12c
-#define P3D_RG_RXDET_STB2_SET_P3 GENMASK(8, 0)
-#define P3D_RG_RXDET_STB2_SET_P3_VAL(x) (0x1ff & (x))
-
-#define U3P_SPLLC_XTALCTL3 0x018
-#define XC3_RG_U3_XTAL_RX_PWD BIT(9)
-#define XC3_RG_U3_FRC_XTAL_RX_PWD BIT(8)
-
-#define U3P_U2FREQ_FMCR0 0x00
-#define P2F_RG_MONCLK_SEL GENMASK(27, 26)
-#define P2F_RG_MONCLK_SEL_VAL(x) ((0x3 & (x)) << 26)
-#define P2F_RG_FREQDET_EN BIT(24)
-#define P2F_RG_CYCLECNT GENMASK(23, 0)
-#define P2F_RG_CYCLECNT_VAL(x) ((P2F_RG_CYCLECNT) & (x))
-
-#define U3P_U2FREQ_VALUE 0x0c
-
-#define U3P_U2FREQ_FMMONR1 0x10
-#define P2F_USB_FM_VALID BIT(0)
-#define P2F_RG_FRCK_EN BIT(8)
-
-#define U3P_REF_CLK 26 /* MHZ */
-#define U3P_SLEW_RATE_COEF 28
-#define U3P_SR_COEF_DIVISOR 1000
-#define U3P_FM_DET_CYCLE_CNT 1024
-
-/* SATA register setting */
-#define PHYD_CTRL_SIGNAL_MODE4 0x1c
-/* CDR Charge Pump P-path current adjustment */
-#define RG_CDR_BICLTD1_GEN1_MSK GENMASK(23, 20)
-#define RG_CDR_BICLTD1_GEN1_VAL(x) ((0xf & (x)) << 20)
-#define RG_CDR_BICLTD0_GEN1_MSK GENMASK(11, 8)
-#define RG_CDR_BICLTD0_GEN1_VAL(x) ((0xf & (x)) << 8)
-
-#define PHYD_DESIGN_OPTION2 0x24
-/* Symbol lock count selection */
-#define RG_LOCK_CNT_SEL_MSK GENMASK(5, 4)
-#define RG_LOCK_CNT_SEL_VAL(x) ((0x3 & (x)) << 4)
-
-#define PHYD_DESIGN_OPTION9 0x40
-/* COMWAK GAP width window */
-#define RG_TG_MAX_MSK GENMASK(20, 16)
-#define RG_TG_MAX_VAL(x) ((0x1f & (x)) << 16)
-/* COMINIT GAP width window */
-#define RG_T2_MAX_MSK GENMASK(13, 8)
-#define RG_T2_MAX_VAL(x) ((0x3f & (x)) << 8)
-/* COMWAK GAP width window */
-#define RG_TG_MIN_MSK GENMASK(7, 5)
-#define RG_TG_MIN_VAL(x) ((0x7 & (x)) << 5)
-/* COMINIT GAP width window */
-#define RG_T2_MIN_MSK GENMASK(4, 0)
-#define RG_T2_MIN_VAL(x) (0x1f & (x))
-
-#define ANA_RG_CTRL_SIGNAL1 0x4c
-/* TX driver tail current control for 0dB de-empahsis mdoe for Gen1 speed */
-#define RG_IDRV_0DB_GEN1_MSK GENMASK(13, 8)
-#define RG_IDRV_0DB_GEN1_VAL(x) ((0x3f & (x)) << 8)
-
-#define ANA_RG_CTRL_SIGNAL4 0x58
-#define RG_CDR_BICLTR_GEN1_MSK GENMASK(23, 20)
-#define RG_CDR_BICLTR_GEN1_VAL(x) ((0xf & (x)) << 20)
-/* Loop filter R1 resistance adjustment for Gen1 speed */
-#define RG_CDR_BR_GEN2_MSK GENMASK(10, 8)
-#define RG_CDR_BR_GEN2_VAL(x) ((0x7 & (x)) << 8)
-
-#define ANA_RG_CTRL_SIGNAL6 0x60
-/* I-path capacitance adjustment for Gen1 */
-#define RG_CDR_BC_GEN1_MSK GENMASK(28, 24)
-#define RG_CDR_BC_GEN1_VAL(x) ((0x1f & (x)) << 24)
-#define RG_CDR_BIRLTR_GEN1_MSK GENMASK(4, 0)
-#define RG_CDR_BIRLTR_GEN1_VAL(x) (0x1f & (x))
-
-#define ANA_EQ_EYE_CTRL_SIGNAL1 0x6c
-/* RX Gen1 LEQ tuning step */
-#define RG_EQ_DLEQ_LFI_GEN1_MSK GENMASK(11, 8)
-#define RG_EQ_DLEQ_LFI_GEN1_VAL(x) ((0xf & (x)) << 8)
-
-#define ANA_EQ_EYE_CTRL_SIGNAL4 0xd8
-#define RG_CDR_BIRLTD0_GEN1_MSK GENMASK(20, 16)
-#define RG_CDR_BIRLTD0_GEN1_VAL(x) ((0x1f & (x)) << 16)
-
-#define ANA_EQ_EYE_CTRL_SIGNAL5 0xdc
-#define RG_CDR_BIRLTD0_GEN3_MSK GENMASK(4, 0)
-#define RG_CDR_BIRLTD0_GEN3_VAL(x) (0x1f & (x))
-
-enum mt_phy_version {
- MT_PHY_V1 = 1,
- MT_PHY_V2,
-};
-
-struct mt65xx_phy_pdata {
- /* avoid RX sensitivity level degradation only for mt8173 */
- bool avoid_rx_sen_degradation;
- enum mt_phy_version version;
-};
-
-struct u2phy_banks {
- void __iomem *misc;
- void __iomem *fmreg;
- void __iomem *com;
-};
-
-struct u3phy_banks {
- void __iomem *spllc;
- void __iomem *chip;
- void __iomem *phyd; /* include u3phyd_bank2 */
- void __iomem *phya; /* include u3phya_da */
-};
-
-struct mt65xx_phy_instance {
- struct phy *phy;
- void __iomem *port_base;
- union {
- struct u2phy_banks u2_banks;
- struct u3phy_banks u3_banks;
- };
- struct clk *ref_clk; /* reference clock of anolog phy */
- u32 index;
- u8 type;
-};
-
-struct mt65xx_u3phy {
- struct device *dev;
- void __iomem *sif_base; /* only shared sif */
- /* deprecated, use @ref_clk instead in phy instance */
- struct clk *u3phya_ref; /* reference clock of usb3 anolog phy */
- const struct mt65xx_phy_pdata *pdata;
- struct mt65xx_phy_instance **phys;
- int nphys;
-};
-
-static void hs_slew_rate_calibrate(struct mt65xx_u3phy *u3phy,
- struct mt65xx_phy_instance *instance)
-{
- struct u2phy_banks *u2_banks = &instance->u2_banks;
- void __iomem *fmreg = u2_banks->fmreg;
- void __iomem *com = u2_banks->com;
- int calibration_val;
- int fm_out;
- u32 tmp;
-
- /* enable USB ring oscillator */
- tmp = readl(com + U3P_USBPHYACR5);
- tmp |= PA5_RG_U2_HSTX_SRCAL_EN;
- writel(tmp, com + U3P_USBPHYACR5);
- udelay(1);
-
- /*enable free run clock */
- tmp = readl(fmreg + U3P_U2FREQ_FMMONR1);
- tmp |= P2F_RG_FRCK_EN;
- writel(tmp, fmreg + U3P_U2FREQ_FMMONR1);
-
- /* set cycle count as 1024, and select u2 channel */
- tmp = readl(fmreg + U3P_U2FREQ_FMCR0);
- tmp &= ~(P2F_RG_CYCLECNT | P2F_RG_MONCLK_SEL);
- tmp |= P2F_RG_CYCLECNT_VAL(U3P_FM_DET_CYCLE_CNT);
- if (u3phy->pdata->version == MT_PHY_V1)
- tmp |= P2F_RG_MONCLK_SEL_VAL(instance->index >> 1);
-
- writel(tmp, fmreg + U3P_U2FREQ_FMCR0);
-
- /* enable frequency meter */
- tmp = readl(fmreg + U3P_U2FREQ_FMCR0);
- tmp |= P2F_RG_FREQDET_EN;
- writel(tmp, fmreg + U3P_U2FREQ_FMCR0);
-
- /* ignore return value */
- readl_poll_timeout(fmreg + U3P_U2FREQ_FMMONR1, tmp,
- (tmp & P2F_USB_FM_VALID), 10, 200);
-
- fm_out = readl(fmreg + U3P_U2FREQ_VALUE);
-
- /* disable frequency meter */
- tmp = readl(fmreg + U3P_U2FREQ_FMCR0);
- tmp &= ~P2F_RG_FREQDET_EN;
- writel(tmp, fmreg + U3P_U2FREQ_FMCR0);
-
- /*disable free run clock */
- tmp = readl(fmreg + U3P_U2FREQ_FMMONR1);
- tmp &= ~P2F_RG_FRCK_EN;
- writel(tmp, fmreg + U3P_U2FREQ_FMMONR1);
-
- if (fm_out) {
- /* ( 1024 / FM_OUT ) x reference clock frequency x 0.028 */
- tmp = U3P_FM_DET_CYCLE_CNT * U3P_REF_CLK * U3P_SLEW_RATE_COEF;
- tmp /= fm_out;
- calibration_val = DIV_ROUND_CLOSEST(tmp, U3P_SR_COEF_DIVISOR);
- } else {
- /* if FM detection fail, set default value */
- calibration_val = 4;
- }
- dev_dbg(u3phy->dev, "phy:%d, fm_out:%d, calib:%d\n",
- instance->index, fm_out, calibration_val);
-
- /* set HS slew rate */
- tmp = readl(com + U3P_USBPHYACR5);
- tmp &= ~PA5_RG_U2_HSTX_SRCTRL;
- tmp |= PA5_RG_U2_HSTX_SRCTRL_VAL(calibration_val);
- writel(tmp, com + U3P_USBPHYACR5);
-
- /* disable USB ring oscillator */
- tmp = readl(com + U3P_USBPHYACR5);
- tmp &= ~PA5_RG_U2_HSTX_SRCAL_EN;
- writel(tmp, com + U3P_USBPHYACR5);
-}
-
-static void u3_phy_instance_init(struct mt65xx_u3phy *u3phy,
- struct mt65xx_phy_instance *instance)
-{
- struct u3phy_banks *u3_banks = &instance->u3_banks;
- u32 tmp;
-
- /* gating PCIe Analog XTAL clock */
- tmp = readl(u3_banks->spllc + U3P_SPLLC_XTALCTL3);
- tmp |= XC3_RG_U3_XTAL_RX_PWD | XC3_RG_U3_FRC_XTAL_RX_PWD;
- writel(tmp, u3_banks->spllc + U3P_SPLLC_XTALCTL3);
-
- /* gating XSQ */
- tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG0);
- tmp &= ~P3A_RG_XTAL_EXT_EN_U3;
- tmp |= P3A_RG_XTAL_EXT_EN_U3_VAL(2);
- writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG0);
-
- tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG9);
- tmp &= ~P3A_RG_RX_DAC_MUX;
- tmp |= P3A_RG_RX_DAC_MUX_VAL(4);
- writel(tmp, u3_banks->phya + U3P_U3_PHYA_REG9);
-
- tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG6);
- tmp &= ~P3A_RG_TX_EIDLE_CM;
- tmp |= P3A_RG_TX_EIDLE_CM_VAL(0xe);
- writel(tmp, u3_banks->phya + U3P_U3_PHYA_REG6);
-
- tmp = readl(u3_banks->phyd + U3P_U3_PHYD_CDR1);
- tmp &= ~(P3D_RG_CDR_BIR_LTD0 | P3D_RG_CDR_BIR_LTD1);
- tmp |= P3D_RG_CDR_BIR_LTD0_VAL(0xc) | P3D_RG_CDR_BIR_LTD1_VAL(0x3);
- writel(tmp, u3_banks->phyd + U3P_U3_PHYD_CDR1);
-
- tmp = readl(u3_banks->phyd + U3P_U3_PHYD_LFPS1);
- tmp &= ~P3D_RG_FWAKE_TH;
- tmp |= P3D_RG_FWAKE_TH_VAL(0x34);
- writel(tmp, u3_banks->phyd + U3P_U3_PHYD_LFPS1);
-
- tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RXDET1);
- tmp &= ~P3D_RG_RXDET_STB2_SET;
- tmp |= P3D_RG_RXDET_STB2_SET_VAL(0x10);
- writel(tmp, u3_banks->phyd + U3P_U3_PHYD_RXDET1);
-
- tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RXDET2);
- tmp &= ~P3D_RG_RXDET_STB2_SET_P3;
- tmp |= P3D_RG_RXDET_STB2_SET_P3_VAL(0x10);
- writel(tmp, u3_banks->phyd + U3P_U3_PHYD_RXDET2);
-
- dev_dbg(u3phy->dev, "%s(%d)\n", __func__, instance->index);
-}
-
-static void u2_phy_instance_init(struct mt65xx_u3phy *u3phy,
- struct mt65xx_phy_instance *instance)
-{
- struct u2phy_banks *u2_banks = &instance->u2_banks;
- void __iomem *com = u2_banks->com;
- u32 index = instance->index;
- u32 tmp;
-
- /* switch to USB function. (system register, force ip into usb mode) */
- tmp = readl(com + U3P_U2PHYDTM0);
- tmp &= ~P2C_FORCE_UART_EN;
- tmp |= P2C_RG_XCVRSEL_VAL(1) | P2C_RG_DATAIN_VAL(0);
- writel(tmp, com + U3P_U2PHYDTM0);
-
- tmp = readl(com + U3P_U2PHYDTM1);
- tmp &= ~P2C_RG_UART_EN;
- writel(tmp, com + U3P_U2PHYDTM1);
-
- tmp = readl(com + U3P_USBPHYACR0);
- tmp |= PA0_RG_USB20_INTR_EN;
- writel(tmp, com + U3P_USBPHYACR0);
-
- /* disable switch 100uA current to SSUSB */
- tmp = readl(com + U3P_USBPHYACR5);
- tmp &= ~PA5_RG_U2_HS_100U_U3_EN;
- writel(tmp, com + U3P_USBPHYACR5);
-
- if (!index) {
- tmp = readl(com + U3P_U2PHYACR4);
- tmp &= ~P2C_U2_GPIO_CTR_MSK;
- writel(tmp, com + U3P_U2PHYACR4);
- }
-
- if (u3phy->pdata->avoid_rx_sen_degradation) {
- if (!index) {
- tmp = readl(com + U3P_USBPHYACR2);
- tmp |= PA2_RG_SIF_U2PLL_FORCE_EN;
- writel(tmp, com + U3P_USBPHYACR2);
-
- tmp = readl(com + U3D_U2PHYDCR0);
- tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
- writel(tmp, com + U3D_U2PHYDCR0);
- } else {
- tmp = readl(com + U3D_U2PHYDCR0);
- tmp |= P2C_RG_SIF_U2PLL_FORCE_ON;
- writel(tmp, com + U3D_U2PHYDCR0);
-
- tmp = readl(com + U3P_U2PHYDTM0);
- tmp |= P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM;
- writel(tmp, com + U3P_U2PHYDTM0);
- }
- }
-
- tmp = readl(com + U3P_USBPHYACR6);
- tmp &= ~PA6_RG_U2_BC11_SW_EN; /* DP/DM BC1.1 path Disable */
- tmp &= ~PA6_RG_U2_SQTH;
- tmp |= PA6_RG_U2_SQTH_VAL(2);
- writel(tmp, com + U3P_USBPHYACR6);
-
- dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index);
-}
-
-static void u2_phy_instance_power_on(struct mt65xx_u3phy *u3phy,
- struct mt65xx_phy_instance *instance)
-{
- struct u2phy_banks *u2_banks = &instance->u2_banks;
- void __iomem *com = u2_banks->com;
- u32 index = instance->index;
- u32 tmp;
-
- /* (force_suspendm=0) (let suspendm=1, enable usb 480MHz pll) */
- tmp = readl(com + U3P_U2PHYDTM0);
- tmp &= ~(P2C_FORCE_SUSPENDM | P2C_RG_XCVRSEL);
- tmp &= ~(P2C_RG_DATAIN | P2C_DTM0_PART_MASK);
- writel(tmp, com + U3P_U2PHYDTM0);
-
- /* OTG Enable */
- tmp = readl(com + U3P_USBPHYACR6);
- tmp |= PA6_RG_U2_OTG_VBUSCMP_EN;
- writel(tmp, com + U3P_USBPHYACR6);
-
- tmp = readl(com + U3P_U2PHYDTM1);
- tmp |= P2C_RG_VBUSVALID | P2C_RG_AVALID;
- tmp &= ~P2C_RG_SESSEND;
- writel(tmp, com + U3P_U2PHYDTM1);
-
- if (u3phy->pdata->avoid_rx_sen_degradation && index) {
- tmp = readl(com + U3D_U2PHYDCR0);
- tmp |= P2C_RG_SIF_U2PLL_FORCE_ON;
- writel(tmp, com + U3D_U2PHYDCR0);
-
- tmp = readl(com + U3P_U2PHYDTM0);
- tmp |= P2C_RG_SUSPENDM | P2C_FORCE_SUSPENDM;
- writel(tmp, com + U3P_U2PHYDTM0);
- }
- dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index);
-}
-
-static void u2_phy_instance_power_off(struct mt65xx_u3phy *u3phy,
- struct mt65xx_phy_instance *instance)
-{
- struct u2phy_banks *u2_banks = &instance->u2_banks;
- void __iomem *com = u2_banks->com;
- u32 index = instance->index;
- u32 tmp;
-
- tmp = readl(com + U3P_U2PHYDTM0);
- tmp &= ~(P2C_RG_XCVRSEL | P2C_RG_DATAIN);
- tmp |= P2C_FORCE_SUSPENDM;
- writel(tmp, com + U3P_U2PHYDTM0);
-
- /* OTG Disable */
- tmp = readl(com + U3P_USBPHYACR6);
- tmp &= ~PA6_RG_U2_OTG_VBUSCMP_EN;
- writel(tmp, com + U3P_USBPHYACR6);
-
- /* let suspendm=0, set utmi into analog power down */
- tmp = readl(com + U3P_U2PHYDTM0);
- tmp &= ~P2C_RG_SUSPENDM;
- writel(tmp, com + U3P_U2PHYDTM0);
- udelay(1);
-
- tmp = readl(com + U3P_U2PHYDTM1);
- tmp &= ~(P2C_RG_VBUSVALID | P2C_RG_AVALID);
- tmp |= P2C_RG_SESSEND;
- writel(tmp, com + U3P_U2PHYDTM1);
-
- if (u3phy->pdata->avoid_rx_sen_degradation && index) {
- tmp = readl(com + U3D_U2PHYDCR0);
- tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
- writel(tmp, com + U3D_U2PHYDCR0);
- }
-
- dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index);
-}
-
-static void u2_phy_instance_exit(struct mt65xx_u3phy *u3phy,
- struct mt65xx_phy_instance *instance)
-{
- struct u2phy_banks *u2_banks = &instance->u2_banks;
- void __iomem *com = u2_banks->com;
- u32 index = instance->index;
- u32 tmp;
-
- if (u3phy->pdata->avoid_rx_sen_degradation && index) {
- tmp = readl(com + U3D_U2PHYDCR0);
- tmp &= ~P2C_RG_SIF_U2PLL_FORCE_ON;
- writel(tmp, com + U3D_U2PHYDCR0);
-
- tmp = readl(com + U3P_U2PHYDTM0);
- tmp &= ~P2C_FORCE_SUSPENDM;
- writel(tmp, com + U3P_U2PHYDTM0);
- }
-}
-
-static void pcie_phy_instance_init(struct mt65xx_u3phy *u3phy,
- struct mt65xx_phy_instance *instance)
-{
- struct u3phy_banks *u3_banks = &instance->u3_banks;
- u32 tmp;
-
- if (u3phy->pdata->version != MT_PHY_V1)
- return;
-
- tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG0);
- tmp &= ~(P3A_RG_XTAL_EXT_PE1H | P3A_RG_XTAL_EXT_PE2H);
- tmp |= P3A_RG_XTAL_EXT_PE1H_VAL(0x2) | P3A_RG_XTAL_EXT_PE2H_VAL(0x2);
- writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG0);
-
- /* ref clk drive */
- tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG1);
- tmp &= ~P3A_RG_CLKDRV_AMP;
- tmp |= P3A_RG_CLKDRV_AMP_VAL(0x4);
- writel(tmp, u3_banks->phya + U3P_U3_PHYA_REG1);
-
- tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG0);
- tmp &= ~P3A_RG_CLKDRV_OFF;
- tmp |= P3A_RG_CLKDRV_OFF_VAL(0x1);
- writel(tmp, u3_banks->phya + U3P_U3_PHYA_REG0);
-
- /* SSC delta -5000ppm */
- tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG20);
- tmp &= ~P3A_RG_PLL_DELTA1_PE2H;
- tmp |= P3A_RG_PLL_DELTA1_PE2H_VAL(0x3c);
- writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG20);
-
- tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG25);
- tmp &= ~P3A_RG_PLL_DELTA_PE2H;
- tmp |= P3A_RG_PLL_DELTA_PE2H_VAL(0x36);
- writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG25);
-
- /* change pll BW 0.6M */
- tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG5);
- tmp &= ~(P3A_RG_PLL_BR_PE2H | P3A_RG_PLL_IC_PE2H);
- tmp |= P3A_RG_PLL_BR_PE2H_VAL(0x1) | P3A_RG_PLL_IC_PE2H_VAL(0x1);
- writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG5);
-
- tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG4);
- tmp &= ~(P3A_RG_PLL_DIVEN_PE2H | P3A_RG_PLL_BC_PE2H);
- tmp |= P3A_RG_PLL_BC_PE2H_VAL(0x3);
- writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG4);
-
- tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG6);
- tmp &= ~P3A_RG_PLL_IR_PE2H;
- tmp |= P3A_RG_PLL_IR_PE2H_VAL(0x2);
- writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG6);
-
- tmp = readl(u3_banks->phya + U3P_U3_PHYA_DA_REG7);
- tmp &= ~P3A_RG_PLL_BP_PE2H;
- tmp |= P3A_RG_PLL_BP_PE2H_VAL(0xa);
- writel(tmp, u3_banks->phya + U3P_U3_PHYA_DA_REG7);
-
- /* Tx Detect Rx Timing: 10us -> 5us */
- tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RXDET1);
- tmp &= ~P3D_RG_RXDET_STB2_SET;
- tmp |= P3D_RG_RXDET_STB2_SET_VAL(0x10);
- writel(tmp, u3_banks->phyd + U3P_U3_PHYD_RXDET1);
-
- tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RXDET2);
- tmp &= ~P3D_RG_RXDET_STB2_SET_P3;
- tmp |= P3D_RG_RXDET_STB2_SET_P3_VAL(0x10);
- writel(tmp, u3_banks->phyd + U3P_U3_PHYD_RXDET2);
-
- /* wait for PCIe subsys register to active */
- usleep_range(2500, 3000);
- dev_dbg(u3phy->dev, "%s(%d)\n", __func__, instance->index);
-}
-
-static void pcie_phy_instance_power_on(struct mt65xx_u3phy *u3phy,
- struct mt65xx_phy_instance *instance)
-{
- struct u3phy_banks *bank = &instance->u3_banks;
- u32 tmp;
-
- tmp = readl(bank->chip + U3P_U3_CHIP_GPIO_CTLD);
- tmp &= ~(P3C_FORCE_IP_SW_RST | P3C_MCU_BUS_CK_GATE_EN |
- P3C_REG_IP_SW_RST);
- writel(tmp, bank->chip + U3P_U3_CHIP_GPIO_CTLD);
-
- tmp = readl(bank->chip + U3P_U3_CHIP_GPIO_CTLE);
- tmp &= ~(P3C_RG_SWRST_U3_PHYD_FORCE_EN | P3C_RG_SWRST_U3_PHYD);
- writel(tmp, bank->chip + U3P_U3_CHIP_GPIO_CTLE);
-}
-
-static void pcie_phy_instance_power_off(struct mt65xx_u3phy *u3phy,
- struct mt65xx_phy_instance *instance)
-
-{
- struct u3phy_banks *bank = &instance->u3_banks;
- u32 tmp;
-
- tmp = readl(bank->chip + U3P_U3_CHIP_GPIO_CTLD);
- tmp |= P3C_FORCE_IP_SW_RST | P3C_REG_IP_SW_RST;
- writel(tmp, bank->chip + U3P_U3_CHIP_GPIO_CTLD);
-
- tmp = readl(bank->chip + U3P_U3_CHIP_GPIO_CTLE);
- tmp |= P3C_RG_SWRST_U3_PHYD_FORCE_EN | P3C_RG_SWRST_U3_PHYD;
- writel(tmp, bank->chip + U3P_U3_CHIP_GPIO_CTLE);
-}
-
-static void sata_phy_instance_init(struct mt65xx_u3phy *u3phy,
- struct mt65xx_phy_instance *instance)
-{
- struct u3phy_banks *u3_banks = &instance->u3_banks;
- void __iomem *phyd = u3_banks->phyd;
- u32 tmp;
-
- /* charge current adjustment */
- tmp = readl(phyd + ANA_RG_CTRL_SIGNAL6);
- tmp &= ~(RG_CDR_BIRLTR_GEN1_MSK | RG_CDR_BC_GEN1_MSK);
- tmp |= RG_CDR_BIRLTR_GEN1_VAL(0x6) | RG_CDR_BC_GEN1_VAL(0x1a);
- writel(tmp, phyd + ANA_RG_CTRL_SIGNAL6);
-
- tmp = readl(phyd + ANA_EQ_EYE_CTRL_SIGNAL4);
- tmp &= ~RG_CDR_BIRLTD0_GEN1_MSK;
- tmp |= RG_CDR_BIRLTD0_GEN1_VAL(0x18);
- writel(tmp, phyd + ANA_EQ_EYE_CTRL_SIGNAL4);
-
- tmp = readl(phyd + ANA_EQ_EYE_CTRL_SIGNAL5);
- tmp &= ~RG_CDR_BIRLTD0_GEN3_MSK;
- tmp |= RG_CDR_BIRLTD0_GEN3_VAL(0x06);
- writel(tmp, phyd + ANA_EQ_EYE_CTRL_SIGNAL5);
-
- tmp = readl(phyd + ANA_RG_CTRL_SIGNAL4);
- tmp &= ~(RG_CDR_BICLTR_GEN1_MSK | RG_CDR_BR_GEN2_MSK);
- tmp |= RG_CDR_BICLTR_GEN1_VAL(0x0c) | RG_CDR_BR_GEN2_VAL(0x07);
- writel(tmp, phyd + ANA_RG_CTRL_SIGNAL4);
-
- tmp = readl(phyd + PHYD_CTRL_SIGNAL_MODE4);
- tmp &= ~(RG_CDR_BICLTD0_GEN1_MSK | RG_CDR_BICLTD1_GEN1_MSK);
- tmp |= RG_CDR_BICLTD0_GEN1_VAL(0x08) | RG_CDR_BICLTD1_GEN1_VAL(0x02);
- writel(tmp, phyd + PHYD_CTRL_SIGNAL_MODE4);
-
- tmp = readl(phyd + PHYD_DESIGN_OPTION2);
- tmp &= ~RG_LOCK_CNT_SEL_MSK;
- tmp |= RG_LOCK_CNT_SEL_VAL(0x02);
- writel(tmp, phyd + PHYD_DESIGN_OPTION2);
-
- tmp = readl(phyd + PHYD_DESIGN_OPTION9);
- tmp &= ~(RG_T2_MIN_MSK | RG_TG_MIN_MSK |
- RG_T2_MAX_MSK | RG_TG_MAX_MSK);
- tmp |= RG_T2_MIN_VAL(0x12) | RG_TG_MIN_VAL(0x04) |
- RG_T2_MAX_VAL(0x31) | RG_TG_MAX_VAL(0x0e);
- writel(tmp, phyd + PHYD_DESIGN_OPTION9);
-
- tmp = readl(phyd + ANA_RG_CTRL_SIGNAL1);
- tmp &= ~RG_IDRV_0DB_GEN1_MSK;
- tmp |= RG_IDRV_0DB_GEN1_VAL(0x20);
- writel(tmp, phyd + ANA_RG_CTRL_SIGNAL1);
-
- tmp = readl(phyd + ANA_EQ_EYE_CTRL_SIGNAL1);
- tmp &= ~RG_EQ_DLEQ_LFI_GEN1_MSK;
- tmp |= RG_EQ_DLEQ_LFI_GEN1_VAL(0x03);
- writel(tmp, phyd + ANA_EQ_EYE_CTRL_SIGNAL1);
-
- dev_dbg(u3phy->dev, "%s(%d)\n", __func__, instance->index);
-}
-
-static void phy_v1_banks_init(struct mt65xx_u3phy *u3phy,
- struct mt65xx_phy_instance *instance)
-{
- struct u2phy_banks *u2_banks = &instance->u2_banks;
- struct u3phy_banks *u3_banks = &instance->u3_banks;
-
- switch (instance->type) {
- case PHY_TYPE_USB2:
- u2_banks->misc = NULL;
- u2_banks->fmreg = u3phy->sif_base + SSUSB_SIFSLV_V1_U2FREQ;
- u2_banks->com = instance->port_base + SSUSB_SIFSLV_V1_U2PHY_COM;
- break;
- case PHY_TYPE_USB3:
- case PHY_TYPE_PCIE:
- u3_banks->spllc = u3phy->sif_base + SSUSB_SIFSLV_V1_SPLLC;
- u3_banks->chip = NULL;
- u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD;
- u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V1_U3PHYA;
- break;
- case PHY_TYPE_SATA:
- u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD;
- break;
- default:
- dev_err(u3phy->dev, "incompatible PHY type\n");
- return;
- }
-}
-
-static void phy_v2_banks_init(struct mt65xx_u3phy *u3phy,
- struct mt65xx_phy_instance *instance)
-{
- struct u2phy_banks *u2_banks = &instance->u2_banks;
- struct u3phy_banks *u3_banks = &instance->u3_banks;
-
- switch (instance->type) {
- case PHY_TYPE_USB2:
- u2_banks->misc = instance->port_base + SSUSB_SIFSLV_V2_MISC;
- u2_banks->fmreg = instance->port_base + SSUSB_SIFSLV_V2_U2FREQ;
- u2_banks->com = instance->port_base + SSUSB_SIFSLV_V2_U2PHY_COM;
- break;
- case PHY_TYPE_USB3:
- case PHY_TYPE_PCIE:
- u3_banks->spllc = instance->port_base + SSUSB_SIFSLV_V2_SPLLC;
- u3_banks->chip = instance->port_base + SSUSB_SIFSLV_V2_CHIP;
- u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V2_U3PHYD;
- u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V2_U3PHYA;
- break;
- default:
- dev_err(u3phy->dev, "incompatible PHY type\n");
- return;
- }
-}
-
-static int mt65xx_phy_init(struct phy *phy)
-{
- struct mt65xx_phy_instance *instance = phy_get_drvdata(phy);
- struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent);
- int ret;
-
- ret = clk_prepare_enable(u3phy->u3phya_ref);
- if (ret) {
- dev_err(u3phy->dev, "failed to enable u3phya_ref\n");
- return ret;
- }
-
- ret = clk_prepare_enable(instance->ref_clk);
- if (ret) {
- dev_err(u3phy->dev, "failed to enable ref_clk\n");
- return ret;
- }
-
- switch (instance->type) {
- case PHY_TYPE_USB2:
- u2_phy_instance_init(u3phy, instance);
- break;
- case PHY_TYPE_USB3:
- u3_phy_instance_init(u3phy, instance);
- break;
- case PHY_TYPE_PCIE:
- pcie_phy_instance_init(u3phy, instance);
- break;
- case PHY_TYPE_SATA:
- sata_phy_instance_init(u3phy, instance);
- break;
- default:
- dev_err(u3phy->dev, "incompatible PHY type\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int mt65xx_phy_power_on(struct phy *phy)
-{
- struct mt65xx_phy_instance *instance = phy_get_drvdata(phy);
- struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent);
-
- if (instance->type == PHY_TYPE_USB2) {
- u2_phy_instance_power_on(u3phy, instance);
- hs_slew_rate_calibrate(u3phy, instance);
- } else if (instance->type == PHY_TYPE_PCIE) {
- pcie_phy_instance_power_on(u3phy, instance);
- }
-
- return 0;
-}
-
-static int mt65xx_phy_power_off(struct phy *phy)
-{
- struct mt65xx_phy_instance *instance = phy_get_drvdata(phy);
- struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent);
-
- if (instance->type == PHY_TYPE_USB2)
- u2_phy_instance_power_off(u3phy, instance);
- else if (instance->type == PHY_TYPE_PCIE)
- pcie_phy_instance_power_off(u3phy, instance);
-
- return 0;
-}
-
-static int mt65xx_phy_exit(struct phy *phy)
-{
- struct mt65xx_phy_instance *instance = phy_get_drvdata(phy);
- struct mt65xx_u3phy *u3phy = dev_get_drvdata(phy->dev.parent);
-
- if (instance->type == PHY_TYPE_USB2)
- u2_phy_instance_exit(u3phy, instance);
-
- clk_disable_unprepare(instance->ref_clk);
- clk_disable_unprepare(u3phy->u3phya_ref);
- return 0;
-}
-
-static struct phy *mt65xx_phy_xlate(struct device *dev,
- struct of_phandle_args *args)
-{
- struct mt65xx_u3phy *u3phy = dev_get_drvdata(dev);
- struct mt65xx_phy_instance *instance = NULL;
- struct device_node *phy_np = args->np;
- int index;
-
- if (args->args_count != 1) {
- dev_err(dev, "invalid number of cells in 'phy' property\n");
- return ERR_PTR(-EINVAL);
- }
-
- for (index = 0; index < u3phy->nphys; index++)
- if (phy_np == u3phy->phys[index]->phy->dev.of_node) {
- instance = u3phy->phys[index];
- break;
- }
-
- if (!instance) {
- dev_err(dev, "failed to find appropriate phy\n");
- return ERR_PTR(-EINVAL);
- }
-
- instance->type = args->args[0];
- if (!(instance->type == PHY_TYPE_USB2 ||
- instance->type == PHY_TYPE_USB3 ||
- instance->type == PHY_TYPE_PCIE ||
- instance->type == PHY_TYPE_SATA)) {
- dev_err(dev, "unsupported device type: %d\n", instance->type);
- return ERR_PTR(-EINVAL);
- }
-
- if (u3phy->pdata->version == MT_PHY_V1) {
- phy_v1_banks_init(u3phy, instance);
- } else if (u3phy->pdata->version == MT_PHY_V2) {
- phy_v2_banks_init(u3phy, instance);
- } else {
- dev_err(dev, "phy version is not supported\n");
- return ERR_PTR(-EINVAL);
- }
-
- return instance->phy;
-}
-
-static const struct phy_ops mt65xx_u3phy_ops = {
- .init = mt65xx_phy_init,
- .exit = mt65xx_phy_exit,
- .power_on = mt65xx_phy_power_on,
- .power_off = mt65xx_phy_power_off,
- .owner = THIS_MODULE,
-};
-
-static const struct mt65xx_phy_pdata tphy_v1_pdata = {
- .avoid_rx_sen_degradation = false,
- .version = MT_PHY_V1,
-};
-
-static const struct mt65xx_phy_pdata tphy_v2_pdata = {
- .avoid_rx_sen_degradation = false,
- .version = MT_PHY_V2,
-};
-
-static const struct mt65xx_phy_pdata mt8173_pdata = {
- .avoid_rx_sen_degradation = true,
- .version = MT_PHY_V1,
-};
-
-static const struct of_device_id mt65xx_u3phy_id_table[] = {
- { .compatible = "mediatek,mt2701-u3phy", .data = &tphy_v1_pdata },
- { .compatible = "mediatek,mt2712-u3phy", .data = &tphy_v2_pdata },
- { .compatible = "mediatek,mt8173-u3phy", .data = &mt8173_pdata },
- { .compatible = "mediatek,generic-tphy-v1", .data = &tphy_v1_pdata },
- { .compatible = "mediatek,generic-tphy-v2", .data = &tphy_v2_pdata },
- { },
-};
-MODULE_DEVICE_TABLE(of, mt65xx_u3phy_id_table);
-
-static int mt65xx_u3phy_probe(struct platform_device *pdev)
-{
- const struct of_device_id *match;
- struct device *dev = &pdev->dev;
- struct device_node *np = dev->of_node;
- struct device_node *child_np;
- struct phy_provider *provider;
- struct resource *sif_res;
- struct mt65xx_u3phy *u3phy;
- struct resource res;
- int port, retval;
-
- match = of_match_node(mt65xx_u3phy_id_table, pdev->dev.of_node);
- if (!match)
- return -EINVAL;
-
- u3phy = devm_kzalloc(dev, sizeof(*u3phy), GFP_KERNEL);
- if (!u3phy)
- return -ENOMEM;
-
- u3phy->pdata = match->data;
- u3phy->nphys = of_get_child_count(np);
- u3phy->phys = devm_kcalloc(dev, u3phy->nphys,
- sizeof(*u3phy->phys), GFP_KERNEL);
- if (!u3phy->phys)
- return -ENOMEM;
-
- u3phy->dev = dev;
- platform_set_drvdata(pdev, u3phy);
-
- if (u3phy->pdata->version == MT_PHY_V1) {
- /* get banks shared by multiple phys */
- sif_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- u3phy->sif_base = devm_ioremap_resource(dev, sif_res);
- if (IS_ERR(u3phy->sif_base)) {
- dev_err(dev, "failed to remap sif regs\n");
- return PTR_ERR(u3phy->sif_base);
- }
- }
-
- /* it's deprecated, make it optional for backward compatibility */
- u3phy->u3phya_ref = devm_clk_get(dev, "u3phya_ref");
- if (IS_ERR(u3phy->u3phya_ref)) {
- if (PTR_ERR(u3phy->u3phya_ref) == -EPROBE_DEFER)
- return -EPROBE_DEFER;
-
- u3phy->u3phya_ref = NULL;
- }
-
- port = 0;
- for_each_child_of_node(np, child_np) {
- struct mt65xx_phy_instance *instance;
- struct phy *phy;
-
- instance = devm_kzalloc(dev, sizeof(*instance), GFP_KERNEL);
- if (!instance) {
- retval = -ENOMEM;
- goto put_child;
- }
-
- u3phy->phys[port] = instance;
-
- phy = devm_phy_create(dev, child_np, &mt65xx_u3phy_ops);
- if (IS_ERR(phy)) {
- dev_err(dev, "failed to create phy\n");
- retval = PTR_ERR(phy);
- goto put_child;
- }
-
- retval = of_address_to_resource(child_np, 0, &res);
- if (retval) {
- dev_err(dev, "failed to get address resource(id-%d)\n",
- port);
- goto put_child;
- }
-
- instance->port_base = devm_ioremap_resource(&phy->dev, &res);
- if (IS_ERR(instance->port_base)) {
- dev_err(dev, "failed to remap phy regs\n");
- retval = PTR_ERR(instance->port_base);
- goto put_child;
- }
-
- instance->phy = phy;
- instance->index = port;
- phy_set_drvdata(phy, instance);
- port++;
-
- /* if deprecated clock is provided, ignore instance's one */
- if (u3phy->u3phya_ref)
- continue;
-
- instance->ref_clk = devm_clk_get(&phy->dev, "ref");
- if (IS_ERR(instance->ref_clk)) {
- dev_err(dev, "failed to get ref_clk(id-%d)\n", port);
- retval = PTR_ERR(instance->ref_clk);
- goto put_child;
- }
- }
-
- provider = devm_of_phy_provider_register(dev, mt65xx_phy_xlate);
-
- return PTR_ERR_OR_ZERO(provider);
-put_child:
- of_node_put(child_np);
- return retval;
-}
-
-static struct platform_driver mt65xx_u3phy_driver = {
- .probe = mt65xx_u3phy_probe,
- .driver = {
- .name = "mt65xx-u3phy",
- .of_match_table = mt65xx_u3phy_id_table,
- },
-};
-
-module_platform_driver(mt65xx_u3phy_driver);
-
-MODULE_AUTHOR("Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>");
-MODULE_DESCRIPTION("mt65xx USB PHY driver");
-MODULE_LICENSE("GPL v2");
--
1.7.9.5