[PATCH 2/2] arm64: dts: rockchip: Add support for rk3399 excavator main board

From: Jacob Chen
Date: Thu Aug 03 2017 - 06:33:07 EST


Add support for the rk3399 excavator main board.
This board works in a combination with the sapphire SOM.

This board have been sold as the rk3399 evaluation board for commercial customers.
You can get more info from below link:
http://opensource.rock-chips.com/wiki_Excavator_sapphire_board

Signed-off-by: Jacob Chen <jacob-chen@xxxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../dts/rockchip/rk3399-sapphire-excavator.dts | 241 +++++++++++++++++++++
2 files changed, 242 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index bcfa53b..d0ad366 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb

always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
new file mode 100644
index 0000000..3f4701e
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
@@ -0,0 +1,241 @@
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3399-sapphire.dtsi"
+
+/ {
+ model = "Excavator-RK3399 Board";
+ compatible = "rockchip,rk3399-sapphire-excavator", "rockchip,rk3399";
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ poll-interval = <100>;
+ keyup-threshold-microvolt = <1800000>;
+
+ button-up {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ press-threshold-microvolt = <100000>;
+ };
+
+ button-down {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ press-threshold-microvolt = <300000>;
+ };
+
+ back {
+ label = "Back";
+ linux,code = <KEY_BACK>;
+ press-threshold-microvolt = <985000>;
+ };
+
+ menu {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ press-threshold-microvolt = <1314000>;
+ };
+ };
+
+ edp_panel: edp-panel {
+ compatible ="lg,lp079qx1-sp0v", "simple-panel";
+ backlight = <&backlight>;
+ power-supply = <&vcc3v3_s0>;
+ enable-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_panel_reset>;
+
+ ports {
+ panel_in_edp: endpoint {
+ remote-endpoint = <&edp_out_panel>;
+ };
+ };
+ };
+
+ keys: gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ power {
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "GPIO Power";
+ linux,code = <KEY_POWER>;
+ linux,input-type = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwr_btn>;
+ wakeup-source;
+ debounce-interval = <100>;
+ };
+ };
+
+ rt5651-sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "realtek,rt5651-codec";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "Mic Jack", "MICBIAS1",
+ "IN1P", "Mic Jack",
+ "Headphone Jack", "HPOL",
+ "Headphone Jack", "HPOR";
+ simple-audio-card,cpu {
+ sound-dai = <&i2s0>;
+ };
+ simple-audio-card,codec {
+ sound-dai = <&rt5651>;
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&backlight {
+ enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&edp {
+ status = "okay";
+
+ ports {
+ edp_out: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ edp_out_panel: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_in_edp>;
+ };
+ };
+ };
+};
+
+&i2c1 {
+ i2c-scl-rising-time-ns = <300>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+
+ rt5651: rt5651@1a {
+ #sound-dai-cells = <0>;
+ compatible = "rockchip,rt5651";
+ reg = <0x1a>;
+ clocks = <&cru SCLK_I2S_8CH_OUT>;
+ clock-names = "mclk";
+ spk-con-gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+ hp-det-gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&i2c4 {
+ i2c-scl-rising-time-ns = <600>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ accelerometer@68 {
+ compatible = "invensense,mpu6500";
+ reg = <0x68>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
+ };
+};
+
+&i2s0 {
+ rockchip,playback-channels = <8>;
+ rockchip,capture-channels = <8>;
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
+&i2s2 {
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
+&pinctrl {
+ buttons {
+ pwr_btn: pwr-btn {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ lcd-panel {
+ lcd_panel_reset: lcd-panel-reset {
+ rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&spdif {
+ pinctrl-0 = <&spdif_bus>;
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
--
2.7.4