Re: [PATCH 0/6] Support for LEGO MINDSTORMS EV3 LCD display

[Noralf TrÃnnes]

Den 03.08.2017 19.11, skrev Andy Shevchenko:
> On Thu, Aug 3, 2017 at 8:09 PM, Andy Shevchenko
> <andy.shevchenko@xxxxxxxxx> wrote:
> > On Thu, Aug 3, 2017 at 6:18 PM, David Lechner <david@xxxxxxxxxxxxxx> wrote:
> >
> > > The particular display I have is this one:
> > > http://wiki.seeed.cc/Grove-OLED_Display_1.12inch/
> > >
> > > It looks like it uses a command/data scheme like the MIPI displays, but
> > > doesn't use any of the standard values for the commands. The controller can
> > > do parallel, SPI and I2C, but the display I have is wired for I2C.
> > It looks very similar to ssd1306. Some description refers to ssd1308.
> http://www.mouser.com/catalog/specsheets/Seeed_104030008.pdf

That pdf refers to another one: 
http://wiki.seeed.cc/Grove-OLED_Display_0.96inch/
There's an fbdev driver that supports ssd1305, ssd1306, ssd1307 and ssd1309:
https://www.kernel.org/doc/Documentation/devicetree/bindings/display/ssd1307fb.txt
http://elixir.free-electrons.com/linux/latest/source/drivers/video/fbdev/ssd1307fb.c
Maybe the ssd1308 will work with that driver...

Noralf.