Re: [PATCH v6 1/7] dt-bindings: phy: qmp: Add output-clock-names

[Bjorn Helgaas]

On Mon, Jul 31, 2017 at 12:04:11PM +0530, Varadarajan Narayanan wrote:
> The phy outputs a clock that will act as the parent for
> the phy's pipe clock. Add the name of this clock to the

s/phy/PHY/

> lane's DT node.
> 
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
> Signed-off-by: Varadarajan Narayanan <varada@xxxxxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> index e11c563..5d7a51f 100644
> --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> @@ -60,6 +60,8 @@ Required properties for child node:
>  	   one for each entry in clock-names.
>   - clock-names: Must contain following for pcie and usb qmp phys:
>  		 "pipe<lane-number>" for pipe clock specific to each lane.
> + - clock-output-names: Name of the phy clock that will be the parent for
> +		       the above pipe clock.

s/phy/PHY/ (this file is a hodge-podge so I guess this isn't making it much
worse)

>  
>   - resets: a list of phandles and reset controller specifier pairs,
>  	   one for each entry in reset-names.
> @@ -96,6 +98,7 @@ Example:
>  
>  			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
>  			clock-names = "pipe0";
> +			clock-output-names = "pcie_0_pipe_clk_src";
>  			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
>  			reset-names = "lane0";
>  		};
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
>