Re: [PATCH 0/6] Support for LEGO MINDSTORMS EV3 LCD display

[David Lechner]

On 08/03/2017 08:08 PM, David Lechner wrote:
> On 08/03/2017 03:11 PM, Noralf TrÃnnes wrote:
> > Den 03.08.2017 19.11, skrev Andy Shevchenko:
> > > On Thu, Aug 3, 2017 at 8:09 PM, Andy Shevchenko
> > > <andy.shevchenko@xxxxxxxxx> wrote:
> > > > On Thu, Aug 3, 2017 at 6:18 PM, David Lechner <david@xxxxxxxxxxxxxx> 
> > > > wrote:
> > > >
> > > > > The particular display I have is this one:
> > > > > http://wiki.seeed.cc/Grove-OLED_Display_1.12inch/
> > > > >
> > > > > It looks like it uses a command/data scheme like the MIPI displays, 
> > > > > but
> > > > > doesn't use any of the standard values for the commands. The 
> > > > > controller can
> > > > > do parallel, SPI and I2C, but the display I have is wired for I2C.
> > > > It looks very similar to ssd1306. Some description refers to ssd1308.
> > > http://www.mouser.com/catalog/specsheets/Seeed_104030008.pdf
> >
> > That pdf refers to another one: 
> > http://wiki.seeed.cc/Grove-OLED_Display_0.96inch/
> > There's an fbdev driver that supports ssd1305, ssd1306, ssd1307 and 
> > ssd1309:
> > https://www.kernel.org/doc/Documentation/devicetree/bindings/display/ssd1307fb.txt 
> >
> > http://elixir.free-electrons.com/linux/latest/source/drivers/video/fbdev/ssd1307fb.c 
> >
> > Maybe the ssd1308 will work with that driver...
>
> The display I have uses a ssd1327 controller. It is 16-bit grayscale. 
> The ssd130x are all 1-bit monochrome. So, probably more like the ssd1325 
> driver in fbftf.

correction, 4-bit grayscale