[PATCH v4 2/2] arm: dts: mt7623: cleanup binding file
From: sean.wang
Date: Fri Aug 04 2017 - 00:00:24 EST
From: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
Dummy patch to sort nodes alphabetically and add some blank lines
for consistency.
Signed-off-by: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
---
arch/arm/boot/dts/mt7623.dtsi | 73 ++++++++++++++-------------
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 57 ++++++++++++---------
arch/arm/boot/dts/mt7623n-rfb-nand.dts | 64 +++++++++++------------
arch/arm/boot/dts/mt7623n-rfb.dtsi | 32 ++++++------
4 files changed, 120 insertions(+), 106 deletions(-)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 2a877ed..ec8a074 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -91,6 +91,7 @@
cooling-max-level = <7>;
clock-frequency = <1300000000>;
};
+
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
@@ -98,6 +99,7 @@
operating-points-v2 = <&cpu_opp_table>;
clock-frequency = <1300000000>;
};
+
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
@@ -105,6 +107,7 @@
operating-points-v2 = <&cpu_opp_table>;
clock-frequency = <1300000000>;
};
+
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
@@ -172,10 +175,12 @@
trip = <&cpu_passive>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
+
map1 {
trip = <&cpu_active>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
+
map2 {
trip = <&cpu_hot>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
@@ -481,6 +486,31 @@
nvmem-cell-names = "calibration-data";
};
+ nandc: nfi@1100d000 {
+ compatible = "mediatek,mt7623-nfc",
+ "mediatek,mt2701-nfc";
+ reg = <0 0x1100d000 0 0x1000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+ clocks = <&pericfg CLK_PERI_NFI>,
+ <&pericfg CLK_PERI_NFI_PAD>;
+ clock-names = "nfi_clk", "pad_clk";
+ status = "disabled";
+ ecc-engine = <&bch>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ bch: ecc@1100e000 {
+ compatible = "mediatek,mt7623-ecc",
+ "mediatek,mt2701-ecc";
+ reg = <0 0x1100e000 0 0x1000>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_NFI_ECC>;
+ clock-names = "nfiecc_clk";
+ status = "disabled";
+ };
+
spi1: spi@11016000 {
compatible = "mediatek,mt7623-spi",
"mediatek,mt2701-spi";
@@ -509,31 +539,6 @@
status = "disabled";
};
- nandc: nfi@1100d000 {
- compatible = "mediatek,mt7623-nfc",
- "mediatek,mt2701-nfc";
- reg = <0 0x1100d000 0 0x1000>;
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
- power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
- clocks = <&pericfg CLK_PERI_NFI>,
- <&pericfg CLK_PERI_NFI_PAD>;
- clock-names = "nfi_clk", "pad_clk";
- status = "disabled";
- ecc-engine = <&bch>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- bch: ecc@1100e000 {
- compatible = "mediatek,mt7623-ecc",
- "mediatek,mt2701-ecc";
- reg = <0 0x1100e000 0 0x1000>;
- interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&pericfg CLK_PERI_NFI_ECC>;
- clock-names = "nfiecc_clk";
- status = "disabled";
- };
-
afe: audio-controller@11220000 {
compatible = "mediatek,mt7623-audio",
"mediatek,mt2701-audio";
@@ -655,6 +660,15 @@
status = "disabled";
};
+ hifsys: syscon@1a000000 {
+ compatible = "mediatek,mt7623-hifsys",
+ "mediatek,mt2701-hifsys",
+ "syscon";
+ reg = <0 0x1a000000 0 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
usb1: usb@1a1c0000 {
compatible = "mediatek,mt7623-xhci",
"mediatek,mt8173-xhci";
@@ -733,15 +747,6 @@
};
};
- hifsys: syscon@1a000000 {
- compatible = "mediatek,mt7623-hifsys",
- "mediatek,mt2701-hifsys",
- "syscon";
- reg = <0 0x1a000000 0 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
ethsys: syscon@1b000000 {
compatible = "mediatek,mt7623-ethsys",
"mediatek,mt2701-ethsys",
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index 444ed93..688a863 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -62,9 +62,9 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pins_a>;
- red {
- label = "bpi-r2:pio:red";
- gpios = <&pio 239 GPIO_ACTIVE_HIGH>;
+ blue {
+ label = "bpi-r2:pio:blue";
+ gpios = <&pio 241 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
@@ -74,9 +74,9 @@
default-state = "off";
};
- blue {
- label = "bpi-r2:pio:blue";
- gpios = <&pio 241 GPIO_ACTIVE_HIGH>;
+ red {
+ label = "bpi-r2:pio:red";
+ gpios = <&pio 239 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
@@ -98,10 +98,12 @@
ð {
status = "okay";
+
gmac0: mac@0 {
compatible = "mediatek,eth-mac";
reg = <0>;
phy-mode = "trgmii";
+
fixed-link {
speed = <1000>;
full-duplex;
@@ -112,12 +114,12 @@
mdio: mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
+
switch@0 {
compatible = "mediatek,mt7530";
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
-
pinctrl-names = "default";
reset-gpios = <&pio 33 0>;
core-supply = <&mt6323_vpa_reg>;
@@ -127,6 +129,7 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
+
port@0 {
reg = <0>;
label = "wan";
@@ -157,6 +160,7 @@
label = "cpu";
ethernet = <&gmac0>;
phy-mode = "trgmii";
+
fixed-link {
speed = <1000>;
full-duplex;
@@ -372,16 +376,6 @@
};
};
- spi0_pins_a: spi@0 {
- pins_spi {
- pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>,
- <MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>,
- <MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>,
- <MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MO>;
- bias-disable;
- };
- };
-
pwm_pins_a: pwm@0 {
pins_pwm {
pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>,
@@ -392,6 +386,16 @@
};
};
+ spi0_pins_a: spi@0 {
+ pins_spi {
+ pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>,
+ <MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>,
+ <MT7623_PIN_55_SPI0_MI_FUNC_SPI0_MI>,
+ <MT7623_PIN_56_SPI0_MO_FUNC_SPI0_MO>;
+ bias-disable;
+ };
+ };
+
uart0_pins_a: uart@0 {
pins_dat {
pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>,
@@ -425,11 +429,13 @@
label = "bpi-r2:isink:green";
default-state = "off";
};
+
led@1 {
reg = <1>;
label = "bpi-r2:isink:red";
default-state = "off";
};
+
led@2 {
reg = <2>;
label = "bpi-r2:isink:blue";
@@ -451,14 +457,6 @@
status = "disabled";
};
-&u3phy1 {
- status = "okay";
-};
-
-&u3phy2 {
- status = "okay";
-};
-
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_a>;
@@ -478,3 +476,12 @@
vusb33-supply = <&mt6323_vusb_reg>;
status = "okay";
};
+
+&u3phy1 {
+ status = "okay";
+};
+
+&u3phy2 {
+ status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/mt7623n-rfb-nand.dts b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
index 63ffb78..17c578f 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-nand.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb-nand.dts
@@ -20,47 +20,22 @@
compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
};
-&pio {
- nand_pins_default: nanddefault {
- pins_dat {
- pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_NLD7>,
- <MT7623_PIN_112_MSDC0_DAT6_FUNC_NLD6>,
- <MT7623_PIN_114_MSDC0_DAT4_FUNC_NLD4>,
- <MT7623_PIN_118_MSDC0_DAT3_FUNC_NLD3>,
- <MT7623_PIN_121_MSDC0_DAT0_FUNC_NLD0>,
- <MT7623_PIN_120_MSDC0_DAT1_FUNC_NLD1>,
- <MT7623_PIN_113_MSDC0_DAT5_FUNC_NLD5>,
- <MT7623_PIN_115_MSDC0_RSTB_FUNC_NLD8>,
- <MT7623_PIN_119_MSDC0_DAT2_FUNC_NLD2>;
- input-enable;
- drive-strength = <MTK_DRIVE_8mA>;
- bias-pull-up;
- };
-
- pins_we {
- pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>;
- drive-strength = <MTK_DRIVE_8mA>;
- bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
- };
-
- pins_ale {
- pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>;
- drive-strength = <MTK_DRIVE_8mA>;
- bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
- };
- };
+&bch {
+ status = "okay";
};
&nandc {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&nand_pins_default>;
+
nand@0 {
reg = <0>;
spare_per_sector = <64>;
nand-ecc-mode = "hw";
nand-ecc-strength = <12>;
nand-ecc-step-size = <1024>;
+
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
@@ -104,6 +79,33 @@
};
};
-&bch {
- status = "okay";
+&pio {
+ nand_pins_default: nanddefault {
+ pins_ale {
+ pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins_dat {
+ pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_NLD7>,
+ <MT7623_PIN_112_MSDC0_DAT6_FUNC_NLD6>,
+ <MT7623_PIN_114_MSDC0_DAT4_FUNC_NLD4>,
+ <MT7623_PIN_118_MSDC0_DAT3_FUNC_NLD3>,
+ <MT7623_PIN_121_MSDC0_DAT0_FUNC_NLD0>,
+ <MT7623_PIN_120_MSDC0_DAT1_FUNC_NLD1>,
+ <MT7623_PIN_113_MSDC0_DAT5_FUNC_NLD5>,
+ <MT7623_PIN_115_MSDC0_RSTB_FUNC_NLD8>,
+ <MT7623_PIN_119_MSDC0_DAT2_FUNC_NLD2>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up;
+ };
+
+ pins_we {
+ pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
index 1e95790..256c5fd 100644
--- a/arch/arm/boot/dts/mt7623n-rfb.dtsi
+++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
@@ -18,6 +18,12 @@
#include "mt6323.dtsi"
/ {
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+
chosen {
stdout-path = "serial2:115200n8";
};
@@ -44,12 +50,6 @@
reg = <0 0x80000000 0 0x40000000>;
};
- aliases {
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
- };
-
usb_p1_vbus: regulator@0 {
compatible = "regulator-fixed";
regulator-name = "usb_vbus";
@@ -60,6 +60,16 @@
};
};
+&mmc0 {
+ vmmc-supply = <&mt6323_vemc3v3_reg>;
+ vqmmc-supply = <&mt6323_vio18_reg>;
+};
+
+&mmc1 {
+ vmmc-supply = <&mt6323_vmch_reg>;
+ vqmmc-supply = <&mt6323_vmc_reg>;
+};
+
&uart0 {
status = "okay";
};
@@ -72,16 +82,6 @@
status = "okay";
};
-&mmc0 {
- vmmc-supply = <&mt6323_vemc3v3_reg>;
- vqmmc-supply = <&mt6323_vio18_reg>;
-};
-
-&mmc1 {
- vmmc-supply = <&mt6323_vmch_reg>;
- vqmmc-supply = <&mt6323_vmc_reg>;
-};
-
&usb1 {
vbus-supply = <&usb_p1_vbus>;
status = "okay";
--
2.7.4