Re: [PATCH v2 00/25] Add QCOM QPIC NAND support

[Boris Brezillon]

On Fri, 4 Aug 2017 09:53:05 +0200
Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx> wrote:

> Hi Abhishek,
> 
> On Wed, 19 Jul 2017 17:17:48 +0530
> Abhishek Sahu <absahu@xxxxxxxxxxxxxx> wrote:
> 
> > v2:
> > 
> > 1. Addressed the review comments given in v1
> > 2. Removed the DMA coherent buffer for register read and used
> >    streaming DMA APIâs
> > 3. Reorganized the NAND read and write functions
> > 4. Separated patch for driver and documentation changes
> > 5. Changed the compatible string for EBI2
> > 
> > v1:
> > 
> > http://www.spinics.net/lists/devicetree/msg183706.html
> > 
> > Abhishek Sahu (25):
> >   mtd: nand: qcom: fix config error for BCH
> >   mtd: nand: qcom: program NAND_DEV_CMD_VLD register
> >   mtd: nand: qcom: change compatible string for EBI2 NANDC
> >   dt-bindings: qcom_nandc: change compatible string for EBI2 NANDC
> >   mtd: nand: qcom: remove redundant chip select compatible string
> >   dt-bindings: qcom_nandc: remove chip select compatible string
> >   mtd: nand: qcom: reorganize nand page read
> >   mtd: nand: qcom: reorganize nand page write
> >   mtd: nand: qcom: remove memset for clearing read register buffer
> >   mtd: nand: qcom: reorganize nand devices probing
> >   mtd: nand: qcom: support for NAND controller properties
> >   dt-bindings: qcom_nandc: QPIC NAND documentation
> >   mtd: nand: qcom: add QPIC NAND compatible string
> >   mtd: nand: qcom: add and initialize QPIC DMA resources
> >   mtd: nand: qcom: DMA mapping support for register read buffer
> >   mtd: nand: qcom: allocate BAM transaction
> >   mtd: nand: qcom: add BAM DMA descriptor handling
> >   mtd: nand: qcom: support for passing flags in transfer functions
> >   mtd: nand: qcom: support for read location registers
> >   mtd: nand: qcom: erased codeword detection configuration
> >   mtd: nand: qcom: support for QPIC page read/write
> >   mtd: nand: qcom: QPIC raw write support
> >   mtd: nand: qcom: change register offset defines with enums
> >   dt-bindings: qcom_nandc: compatible string for version 1.5.0
> >   mtd: nand: qcom: support for QPIC version 1.5.0  
> 
> Applied patch 1 and 5 to 11 to nand/next [1].
> 

My bad, it's 5 to 10, patch 11 did not apply cleanly. And I also forgot
the link. Please rebase on this branch before sending your v3.

Thanks,

Boris

[1]http://git.infradead.org/l2-mtd.git/shortlog/refs/heads/nand/next

> > 
> >  .../devicetree/bindings/mtd/qcom_nandc.txt         |   56 +-
> >  drivers/mtd/nand/qcom_nandc.c                      | 1157 ++++++++++++++++----
> >  2 files changed, 1010 insertions(+), 203 deletions(-)
> >   
>