Re: [linux-sunxi] [PATCH 10/13] [NOT FOR REVIEW NOW] clk: sunxi: Add CLK_SET_RATE_PARENT flag for H3 HDMI clock

[Icenowy Zheng]

ä 2017å8æ4æ GMT+08:00 äå4:59:03, "Jernej Åkrabec" <jernej.skrabec@xxxxxxxx> åå:
>Hi Chen-Yu,
>
>Dne petek, 04. avgust 2017 ob 06:29:50 CEST je Chen-Yu Tsai napisal(a):
>> On Fri, Aug 4, 2017 at 12:16 PM, Icenowy Zheng <icenowy@xxxxxxx>
>wrote:
>> > ä 2017å8æ4æ GMT+08:00 äå12:15:27, Chen-Yu Tsai <wens@xxxxxxxx> åå:
>> >>Hi,
>> >>
>> >>On Tue, Aug 1, 2017 at 9:13 PM, Icenowy Zheng <icenowy@xxxxxxx>
>wrote:
>> >>> From: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
>> >>> 
>> >>> When setting the HDMI clock of H3, the PLL_VIDEO clock needs to
>be
>> >>
>> >>set.
>> >>
>> >>> Add CLK_SET_RATE_PARENT flag for H3 HDMI clock.
>> >>> 
>> >>> Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
>> >>> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
>> >>> ---
>> >>> 
>> >>>  drivers/clk/sunxi-ng/ccu-sun8i-h3.c | 2 +-
>> >>>  1 file changed, 1 insertion(+), 1 deletion(-)
>> >>> 
>> >>> diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
>> >>
>> >>b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
>> >>
>> >>> index b1127e8629d9..2ebb3d865b01 100644
>> >>> --- a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
>> >>> +++ b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
>> >>> @@ -474,7 +474,7 @@ static SUNXI_CCU_GATE(avs_clk,
>> >>
>> >>"avs",          "osc24M",
>> >>
>> >>>  static const char * const hdmi_parents[] = { "pll-video" };
>> >>>  static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
>> >>> 
>> >>> -                                0x150, 0, 4, 24, 2, BIT(31), 0);
>> >>> +                                0x150, 0, 4, 24, 2, BIT(31),
>> >>
>> >>CLK_SET_RATE_PARENT);
>> >>
>> >>Line is longer than 80 characters.
>> >>
>> >>This looks independent enough so I've merged this for 4.14 with the
>> >>offending line wrapped and the following tag added:
>> >>
>> >>Fixes: 0577e4853bfb ("clk: sunxi-ng: Add H3 clocks")
>> >>
>> > Please don't merge this now until Jernej send it.
>> 
>> (Dropped Rob, devicetree and dri mailing lists)
>> 
>> Hi Jernej,
>> 
>> Is it OK if we take this patch for the next release? Or rather,
>> if there anything blocking this patch?
>
>I just made last check now and this patch is indeed OK. Before merging,
>please 
>read explanation below.
>
>Background:
>According to H3 datasheet and BSP driver, HDMI clock has M factor
>(divider) to 
>correctly set pixel clock to desired value. However, Jens Kuske
>discovered 
>that this factor doesn't play any role whatsoever and instead, division
>factor 
>set in PHY registers is the important one. I confirmed that on BSP
>kernel by 
>tying M factor to 0. Both, HDMI video and audio, still worked
>correctly.
>
>So that flag is necessary to set pll-video to pixel clock * div factor.
>I can 
>also change HDMI clock type to SUNXI_CCU_GATE (without M factor) and
>document 
>discrepancy with datasheet in ccu-sun8i-h3.c. Alternatively to this
>patch, 
>just in case, to be on the safe side, I can add pll-video clock phandle
>to the 
>dt node. However, as far as I know, that might prevent selecting
>another 
>parent on SoCs where HDMI clock has multiple parents.

Unfortunately A64 is this situation -- A64 TCON1/HDMI clocks can
use pll-video0/1 as parent, but TCON0 can only use pll-video0 or
pll-mipi (also a downstream clock of pll-video0), and by default
TCON1/HDMI also uses pll-video0.

Because of this I have never succeeded in multihead (LCD+HDMI)
on Pinebook.

>
>Regards,
>Jernej
>
>> 
>> Thanks
>> ChenYu
>> 
>> >>ChenYu
>> >>
>> >>>  static SUNXI_CCU_GATE(hdmi_ddc_clk,    "hdmi-ddc",     "osc24M",
>> >>>  
>> >>>                       0x154, BIT(31), 0);
>> >>> 
>> >>> --
>> >>> 2.13.0
>> >>> 
>> >>> --
>> >>> You received this message because you are subscribed to the
>Google
>> >>
>> >>Groups "linux-sunxi" group.
>> >>
>> >>> To unsubscribe from this group and stop receiving emails from it,
>> >>
>> >>send an email to linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxxx
>> >>
>> >>> For more options, visit https://groups.google.com/d/optout.
>> > 
>> > --
>> > You received this message because you are subscribed to the Google
>Groups
>> > "linux-sunxi" group. To unsubscribe from this group and stop
>receiving
>> > emails from it, send an email to
>> > linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxxx For more options, visit
>> > https://groups.google.com/d/optout.
>> 
>> --
>> You received this message because you are subscribed to the Google
>Groups
>> "linux-sunxi" group. To unsubscribe from this group and stop
>receiving
>> emails from it, send an email to
>linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxxx
>> For more options, visit https://groups.google.com/d/optout.