Re: [PATCH v5 3/6] drm/vc4: Delay DSI host registration until the panel has probed.

[Boris Brezillon]

On Tue, 18 Jul 2017 14:05:07 -0700
Eric Anholt <eric@xxxxxxxxxx> wrote:

> The vc4 driver was unusual in that it was delaying the panel lookup
> until the attach step, while most DSI hosts will -EPROBE_DEFER until
> they get a panel.
> 
> v2: Drop a debug message that slipped in.
> 
> Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
> Reviewed-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx> (v1)

Reviewed-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>

> ---
>  drivers/gpu/drm/vc4/vc4_dsi.c | 38 ++++++++++++++------------------------
>  1 file changed, 14 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
> index 57213f4e3c72..769f247c52a9 100644
> --- a/drivers/gpu/drm/vc4/vc4_dsi.c
> +++ b/drivers/gpu/drm/vc4/vc4_dsi.c
> @@ -33,6 +33,7 @@
>  #include <drm/drm_crtc_helper.h>
>  #include <drm/drm_edid.h>
>  #include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_of.h>
>  #include <drm/drm_panel.h>
>  #include <linux/clk.h>
>  #include <linux/clk-provider.h>
> @@ -504,7 +505,6 @@ struct vc4_dsi {
>  	struct mipi_dsi_host dsi_host;
>  	struct drm_encoder *encoder;
>  	struct drm_bridge *bridge;
> -	bool is_panel_bridge;
>  
>  	void __iomem *regs;
>  
> @@ -1289,7 +1289,6 @@ static int vc4_dsi_host_attach(struct mipi_dsi_host *host,
>  			       struct mipi_dsi_device *device)
>  {
>  	struct vc4_dsi *dsi = host_to_dsi(host);
> -	int ret = 0;
>  
>  	dsi->lanes = device->lanes;
>  	dsi->channel = device->channel;
> @@ -1324,34 +1323,12 @@ static int vc4_dsi_host_attach(struct mipi_dsi_host *host,
>  		return 0;
>  	}
>  
> -	dsi->bridge = of_drm_find_bridge(device->dev.of_node);
> -	if (!dsi->bridge) {
> -		struct drm_panel *panel =
> -			of_drm_find_panel(device->dev.of_node);
> -
> -		dsi->bridge = drm_panel_bridge_add(panel,
> -						   DRM_MODE_CONNECTOR_DSI);
> -		if (IS_ERR(dsi->bridge)) {
> -			ret = PTR_ERR(dsi->bridge);
> -			dsi->bridge = NULL;
> -			return ret;
> -		}
> -		dsi->is_panel_bridge = true;
> -	}
> -
>  	return drm_bridge_attach(dsi->encoder, dsi->bridge, NULL);
>  }
>  
>  static int vc4_dsi_host_detach(struct mipi_dsi_host *host,
>  			       struct mipi_dsi_device *device)
>  {
> -	struct vc4_dsi *dsi = host_to_dsi(host);
> -
> -	if (dsi->is_panel_bridge) {
> -		drm_panel_bridge_remove(dsi->bridge);
> -		dsi->bridge = NULL;
> -	}
> -
>  	return 0;
>  }
>  
> @@ -1495,6 +1472,7 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
>  	struct vc4_dev *vc4 = to_vc4_dev(drm);
>  	struct vc4_dsi *dsi;
>  	struct vc4_dsi_encoder *vc4_dsi_encoder;
> +	struct drm_panel *panel;
>  	const struct of_device_id *match;
>  	dma_cap_mask_t dma_mask;
>  	int ret;
> @@ -1598,6 +1576,18 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
>  		return ret;
>  	}
>  
> +	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
> +					  &panel, &dsi->bridge);
> +	if (ret)
> +		return ret;
> +
> +	if (panel) {
> +		dsi->bridge = devm_drm_panel_bridge_add(dev, panel,
> +							DRM_MODE_CONNECTOR_DSI);
> +		if (IS_ERR(dsi->bridge))
> +			return PTR_ERR(dsi->bridge);
> +	}
> +
>  	/* The esc clock rate is supposed to always be 100Mhz. */
>  	ret = clk_set_rate(dsi->escape_clock, 100 * 1000000);
>  	if (ret) {