[PATCH 3/9] ata: ceva: Add gen 3 mode support in driver

From: Michal Simek
Date: Fri Aug 04 2017 - 09:20:04 EST


From: Anurag Kumar Vulisha <anurag.kumar.vulisha@xxxxxxxxxx>

This patch sets gen 3 mode as default mode in ahci_ceva driver.

Signed-off-by: Anurag Kumar Vulisha <anuragku@xxxxxxxxxx>
Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx>
---

drivers/ata/ahci_ceva.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/ahci_ceva.c b/drivers/ata/ahci_ceva.c
index 59de2ca1885c..aa32c8a0f083 100644
--- a/drivers/ata/ahci_ceva.c
+++ b/drivers/ata/ahci_ceva.c
@@ -60,6 +60,7 @@
#define PORT1_BASE 0x180

/* Port Control Register Bit Definitions */
+#define PORT_SCTL_SPD_GEN3 (0x3 << 4)
#define PORT_SCTL_SPD_GEN2 (0x2 << 4)
#define PORT_SCTL_SPD_GEN1 (0x1 << 4)
#define PORT_SCTL_IPM (0x3 << 8)
@@ -136,8 +137,8 @@ static void ahci_ceva_setup(struct ahci_host_priv *hpriv)
tmp = PTC_RX_WM_VAL | PTC_RSVD;
writel(tmp, mmio + AHCI_VEND_PTC);

- /* Default to Gen 2 Speed and Gen 1 if Gen2 is broken */
- tmp = PORT_SCTL_SPD_GEN2 | PORT_SCTL_IPM;
+ /* Default to Gen 3 Speed and Gen 1 if Gen2 is broken */
+ tmp = PORT_SCTL_SPD_GEN3 | PORT_SCTL_IPM;
if (cevapriv->flags & CEVA_FLAG_BROKEN_GEN2)
tmp = PORT_SCTL_SPD_GEN1 | PORT_SCTL_IPM;
writel(tmp, mmio + PORT_SCR_CTL + PORT_BASE + PORT_OFFSET * i);
--
1.9.1