[PATCH 02/14] mmc: meson-gx: remove CLK_DIVIDER_ALLOW_ZERO clock flag

From: Jerome Brunet
Date: Fri Aug 04 2017 - 13:44:09 EST


Remove CLK_DIVIDER_ALLOW_ZERO. This flag means that a 1 based divider
with a 0 value will behave as a bypass clock

The mmc divider does not behave like this, a 0 value disables the clock
Remove this flag so CCF never allows a 0 value on this clock

Fixes: 51c5d8447bd7 ("MMC: meson: initial support for GX platforms")
Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
---
drivers/mmc/host/meson-gx-mmc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
index 4217287923d4..d480a8052a06 100644
--- a/drivers/mmc/host/meson-gx-mmc.c
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -389,7 +389,7 @@ static int meson_mmc_clk_init(struct meson_host *host)
host->cfg_div.width = __builtin_popcountl(CLK_DIV_MASK);
host->cfg_div.hw.init = &init;
host->cfg_div.flags = CLK_DIVIDER_ONE_BASED |
- CLK_DIVIDER_ROUND_CLOSEST | CLK_DIVIDER_ALLOW_ZERO;
+ CLK_DIVIDER_ROUND_CLOSEST;

host->cfg_div_clk = devm_clk_register(host->dev, &host->cfg_div.hw);
if (WARN_ON(PTR_ERR_OR_ZERO(host->cfg_div_clk)))
--
2.9.4