[PATCH 0/6] ARM64: dts: meson: update around mmc
From: Jerome Brunet
Date: Fri Aug 04 2017 - 14:08:37 EST
The patchset feature update around mmc. It is linked to this series [0]
but does not strictly depends on it. It adds:
* The regulator settling times for the gpio regulator of nanopi-k2 and
the libretech-cc.
* UHS modes for the p20x and nanopi-k2. SDR104 is left out because the
p20x does not support it and the driver requires more work to enable
it on the nanopi-k2
* clk-gate pins: these are the pinmuxes used for the clk-stop work
around explained here [0]
It also removes cap-sd-highspeed from eMMC nodes.
This series has been tested on the gxbb-200, the gxbb-nanopi-k2 and the
gxl-s905x-libretech-cc
Jerome Brunet (6):
ARM64: dts: meson-gxbb: nanopi-k2: add card regulator settle times
ARM64: dts: meson-gxl: libretech-cc: add card regulator settle times
ARM64: dts: meson-gxbb: p20x: enable sdcard UHS modes
ARM64: dts: meson-gxbb: nanopi-k2: enable sdcard UHS modes
ARM64: dts: meson: add mmc clk gate pins
ARM64: dts: meson: remove cap-sd-highspeed from emmc nodes
.../arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 10 ++++---
.../boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 18 ++++++++----
.../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 12 ++++----
.../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 9 +++---
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 13 ++++++---
.../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 10 ++++---
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 33 ++++++++++++++++++++++
.../dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 7 +++--
.../dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 9 ++++--
.../dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts | 10 ++++---
.../boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 10 ++++---
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 33 ++++++++++++++++++++++
.../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 7 +++--
arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts | 1 -
14 files changed, 139 insertions(+), 43 deletions(-)
--
2.9.4