[PATCH v2 6/7] mtd: spi-nor: Add driver for Adaptrum Anarion QSPI controller
From: Alexandru Gagniuc
Date: Fri Aug 04 2017 - 16:15:14 EST
Add support for the QSPI controller found in Adaptrum Anarion SOCs.
This controller is designed specifically to handle SPI NOR chips, and
the driver is modeled as such.
Because the system is emulated on an FPGA, we don't have a way to test
all the hardware adjustemts, so only basic features are implemented at
this time.
Signed-off-by: Alexandru Gagniuc <alex.g@xxxxxxxxxxxx>
---
Changes since v1:
* Moved documentation for bindings to separate patch
* Removed idiotic dev_err() message
* Changed bit macros to use BIT(n) instead of (1 << n)
* Fixed alphabetical ordering in Kconfig and makefiles
* Rebased on v4.13-rc3 and re-tested READ and FAST_READ modes
drivers/mtd/spi-nor/Kconfig | 7 +
drivers/mtd/spi-nor/Makefile | 1 +
drivers/mtd/spi-nor/anarion-quadspi.c | 482 ++++++++++++++++++++++++++++++++++
3 files changed, 490 insertions(+)
create mode 100644 drivers/mtd/spi-nor/anarion-quadspi.c
diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
index 293c8a4..6f36e13 100644
--- a/drivers/mtd/spi-nor/Kconfig
+++ b/drivers/mtd/spi-nor/Kconfig
@@ -29,6 +29,13 @@ config MTD_SPI_NOR_USE_4K_SECTORS
Please note that some tools/drivers/filesystems may not work with
4096 B erase size (e.g. UBIFS requires 15 KiB as a minimum).
+config SPI_ANARION_QUADSPI
+ tristate "Adaptrum Anarion Quad SPI Controller"
+ depends on OF && HAS_IOMEM
+ help
+ Enable support for the Adaptrum Anarion Quad SPI controller.
+ This driver does not support generic SPI. It only supports SPI NOR.
+
config SPI_ASPEED_SMC
tristate "Aspeed flash controllers in SPI mode"
depends on ARCH_ASPEED || COMPILE_TEST
diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
index 285aab8..0ea797b 100644
--- a/drivers/mtd/spi-nor/Makefile
+++ b/drivers/mtd/spi-nor/Makefile
@@ -1,4 +1,5 @@
obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o
+obj-$(CONFIG_SPI_ANARION_QUADSPI) += anarion-quadspi.o
obj-$(CONFIG_SPI_ASPEED_SMC) += aspeed-smc.o
obj-$(CONFIG_SPI_ATMEL_QUADSPI) += atmel-quadspi.o
obj-$(CONFIG_SPI_CADENCE_QUADSPI) += cadence-quadspi.o
diff --git a/drivers/mtd/spi-nor/anarion-quadspi.c b/drivers/mtd/spi-nor/anarion-quadspi.c
new file mode 100644
index 0000000..c250a75
--- /dev/null
+++ b/drivers/mtd/spi-nor/anarion-quadspi.c
@@ -0,0 +1,482 @@
+/*
+ * Adaptrum Anarion Quad SPI controller driver
+ *
+ * Copyright (C) 2017, Adaptrum, Inc.
+ * (Written by Alexandru Gagniuc <alex.g at adaptrum.com> for Adaptrum, Inc.)
+ * Licensed under the GPLv2 or (at your option) any later version.
+ */
+
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/mtd/spi-nor.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#define ASPI_REG_CLOCK 0x00
+#define ASPI_REG_GO 0x04
+#define ASPI_REG_CHAIN 0x08
+#define ASPI_REG_CMD1 0x0c
+#define ASPI_REG_CMD2 0x10
+#define ASPI_REG_ADDR1 0x14
+#define ASPI_REG_ADDR2 0x18
+#define ASPI_REG_PERF1 0x1c
+#define ASPI_REG_PERF2 0x20
+#define ASPI_REG_HI_Z 0x24
+#define ASPI_REG_BYTE_COUNT 0x28
+#define ASPI_REG_DATA1 0x2c
+#define ASPI_REG_DATA2 0x30
+#define ASPI_REG_FINISH 0x34
+#define ASPI_REG_XIP 0x38
+#define ASPI_REG_FIFO_STATUS 0x3c
+#define ASPI_REG_LAT 0x40
+#define ASPI_REG_OUT_DELAY_0 0x44
+#define ASPI_REG_OUT_DELAY_1 0x48
+#define ASPI_REG_IN_DELAY_0 0x4c
+#define ASPI_REG_IN_DELAY_1 0x50
+#define ASPI_REG_DQS_DELAY 0x54
+#define ASPI_REG_STATUS 0x58
+#define ASPI_REG_IRQ_ENABLE 0x5c
+#define ASPI_REG_IRQ_STATUS 0x60
+#define ASPI_REG_AXI_BAR 0x64
+#define ASPI_REG_READ_CFG 0x6c
+
+#define ASPI_CLK_SW_RESET BIT(0)
+#define ASPI_CLK_RESET_BUF BIT(1)
+#define ASPI_CLK_RESET_ALL (ASPI_CLK_SW_RESET | ASPI_CLK_RESET_BUF)
+#define ASPI_CLK_SPI_MODE3 BIT(2)
+#define ASPI_CLOCK_DIV_MASK (0xff << 8)
+#define ASPI_CLOCK_DIV(div) (((div) << 8) & ASPI_CLOCK_DIV_MASK)
+
+#define ASPI_TIMEOUT_US 100000
+
+#define ASPI_DATA_LEN_MASK 0x3fff
+#define ASPI_MAX_XFER_LEN (size_t)(ASPI_DATA_LEN_MASK + 1)
+
+#define MODE_IO_X1 (0 << 16)
+#define MODE_IO_X2 (1 << 16)
+#define MODE_IO_X4 (2 << 16)
+#define MODE_IO_SDR_POS_SKEW (0 << 20)
+#define MODE_IO_SDR_NEG_SKEW (1 << 20)
+#define MODE_IO_DDR_34_SKEW (2 << 20)
+#define MODE_IO_DDR_PN_SKEW (3 << 20)
+#define MODE_IO_DDR_DQS (5 << 20)
+
+#define ASPI_STATUS_BUSY BIT(2)
+
+/*
+ * This mask only matches the chain length for the DATA2 register. That's okay
+ * since we only need to use it with DATA2. The other masks are:
+ * DATA2: 0x3fff
+ * CMD2: 0x0003
+ * ADDR2: 0x0007
+ * PERF2: 0x0000
+ * HI_Z: 0x003f
+ * BCNT: 0x0007
+ */
+#define CHAIN_LEN(x) (((x) - 1) & ASPI_DATA_LEN_MASK)
+
+struct anarion_qspi {
+ struct spi_nor nor;
+ struct device *dev;
+ uintptr_t regbase;
+ uintptr_t xipbase;
+ uint32_t xfer_mode_cmd;
+ uint32_t xfer_mode_addr;
+ uint32_t xfer_mode_data;
+ uint8_t num_hi_z_clocks;
+};
+
+struct qspi_io_chain {
+ uint8_t action;
+ uint32_t data;
+ uint16_t data_len;
+ uint32_t mode;
+};
+
+enum chain_code {
+ CHAIN_NOP = 0,
+ CHAIN_CMD = 1,
+ CHAIN_ADDR = 2,
+ CHAIN_WTFIUM = 3,
+ CHAIN_HI_Z = 4,
+ CHAIN_DATA_OUT = 5,
+ CHAIN_DATA_IN = 6,
+ CHAIN_FINISH = 7,
+};
+
+static const struct chain_to_reg {
+ uint8_t data_reg;
+ uint8_t ctl_reg;
+} chain_to_reg_map[] = {
+ [CHAIN_NOP] = {0, 0},
+ [CHAIN_CMD] = {ASPI_REG_CMD1, ASPI_REG_CMD2},
+ [CHAIN_ADDR] = {ASPI_REG_ADDR1, ASPI_REG_ADDR2},
+ [CHAIN_WTFIUM] = {0, 0},
+ [CHAIN_HI_Z] = {0, ASPI_REG_HI_Z},
+ [CHAIN_DATA_OUT] = {0, ASPI_REG_DATA2},
+ [CHAIN_DATA_IN] = {0, ASPI_REG_DATA2},
+ [CHAIN_FINISH] = {0, ASPI_REG_FINISH},
+};
+
+static uint32_t aspi_read_reg(struct anarion_qspi *aspi, uint8_t reg)
+{
+ return readl((void *)(aspi->regbase + reg));
+};
+
+static void aspi_write_reg(struct anarion_qspi *aspi, uint8_t reg, uint32_t val)
+{
+ writel(val, (void *)(aspi->regbase + reg));
+};
+
+static size_t aspi_get_fifo_level(struct anarion_qspi *aspi)
+{
+ return aspi_read_reg(aspi, ASPI_REG_FIFO_STATUS) & 0xff;
+}
+
+static void aspi_drain_fifo(struct anarion_qspi *aspi, uint8_t *buf, size_t len)
+{
+ uint32_t data;
+
+ aspi_write_reg(aspi, ASPI_REG_BYTE_COUNT, sizeof(uint32_t));
+ while (len >= 4) {
+ data = aspi_read_reg(aspi, ASPI_REG_DATA1);
+ memcpy(buf, &data, sizeof(data));
+ buf += 4;
+ len -= 4;
+ }
+
+ if (len) {
+ aspi_write_reg(aspi, ASPI_REG_BYTE_COUNT, len);
+ data = aspi_read_reg(aspi, ASPI_REG_DATA1);
+ memcpy(buf, &data, len);
+ }
+}
+
+static void aspi_seed_fifo(struct anarion_qspi *aspi,
+ const uint8_t *buf, size_t len)
+{
+ uint32_t data;
+
+ aspi_write_reg(aspi, ASPI_REG_BYTE_COUNT, sizeof(uint32_t));
+ while (len >= 4) {
+ memcpy(&data, buf, sizeof(data));
+ aspi_write_reg(aspi, ASPI_REG_DATA1, data);
+ buf += 4;
+ len -= 4;
+ }
+
+ if (len) {
+ aspi_write_reg(aspi, ASPI_REG_BYTE_COUNT, len);
+ memcpy(&data, buf, len);
+ aspi_write_reg(aspi, ASPI_REG_DATA1, data);
+ }
+}
+
+static int aspi_wait_idle(struct anarion_qspi *aspi)
+{
+ uint32_t status;
+ void *status_reg = (void *)(aspi->regbase + ASPI_REG_STATUS);
+
+ return readl_poll_timeout(status_reg, status,
+ !(status & ASPI_STATUS_BUSY),
+ 1, ASPI_TIMEOUT_US);
+}
+
+static int aspi_poll_and_seed_fifo(struct anarion_qspi *aspi,
+ const void *src_addr, size_t len)
+{
+ size_t wait_us, fifo_space = 0, xfer_len;
+ const uint8_t *src = src_addr;
+
+ while (len > 0) {
+ wait_us = 0;
+ while (wait_us++ < ASPI_TIMEOUT_US) {
+ fifo_space = 64 - aspi_get_fifo_level(aspi);
+ if (fifo_space)
+ break;
+ udelay(1);
+ }
+
+ xfer_len = min(len, fifo_space);
+ aspi_seed_fifo(aspi, src, xfer_len);
+ src += xfer_len;
+ len -= xfer_len;
+ }
+
+ return 0;
+}
+
+static void aspi_setup_chain(struct anarion_qspi *aspi,
+ const struct qspi_io_chain *chain,
+ size_t chain_len)
+{
+ size_t i;
+ uint32_t chain_reg = 0;
+ const struct qspi_io_chain *link;
+ const struct chain_to_reg *regs;
+
+ for (link = chain, i = 0; i < chain_len; i++, link++) {
+ regs = &chain_to_reg_map[link->action];
+
+ if (link->data_len && regs->data_reg)
+ aspi_write_reg(aspi, regs->data_reg, link->data);
+
+ if (regs->ctl_reg)
+ aspi_write_reg(aspi, regs->ctl_reg,
+ CHAIN_LEN(link->data_len) | link->mode);
+
+ chain_reg |= link->action << (i * 4);
+ }
+
+ chain_reg |= CHAIN_FINISH << (i * 4);
+
+ aspi_write_reg(aspi, ASPI_REG_CHAIN, chain_reg);
+}
+
+static int aspi_execute_chain(struct anarion_qspi *aspi)
+{
+ /* Go, johnny go */
+ aspi_write_reg(aspi, ASPI_REG_GO, 1);
+ return aspi_wait_idle(aspi);
+}
+
+static int anarion_spi_read_nor_reg(struct spi_nor *nor, uint8_t opcode,
+ uint8_t *buf, int len)
+{
+ struct anarion_qspi *aspi = nor->priv;
+ struct qspi_io_chain chain[] = {
+ {CHAIN_CMD, opcode, 1, MODE_IO_X1},
+ {CHAIN_DATA_IN, 0, (uint16_t)len, MODE_IO_X1},
+ };
+
+ if (len >= 8)
+ return -EMSGSIZE;
+
+ aspi_setup_chain(aspi, chain, ARRAY_SIZE(chain));
+ aspi_execute_chain(aspi);
+
+ aspi_drain_fifo(aspi, buf, len);
+
+ return 0;
+}
+
+static int anarion_qspi_cmd_addr(struct anarion_qspi *aspi, uint16_t cmd,
+ uint32_t addr, int addr_len)
+{
+ size_t chain_size;
+ const struct qspi_io_chain chain[] = {
+ {CHAIN_CMD, cmd, 1, MODE_IO_X1},
+ {CHAIN_ADDR, addr, addr_len, MODE_IO_X1},
+ };
+
+ chain_size = addr_len ? ARRAY_SIZE(chain) : (ARRAY_SIZE(chain) - 1);
+ aspi_setup_chain(aspi, chain, chain_size);
+ return aspi_execute_chain(aspi);
+}
+
+static int anarion_spi_write_nor_reg(struct spi_nor *nor, uint8_t opcode,
+ uint8_t *buf, int len)
+{
+ uint32_t addr, i;
+ struct anarion_qspi *aspi = nor->priv;
+
+ if (len > sizeof(uint32_t))
+ return -ENOTSUPP;
+
+ for (i = 0, addr = 0; i < len; i++)
+ addr |= buf[len - 1 - i] << (i * 8);
+
+ return anarion_qspi_cmd_addr(aspi, opcode, addr, len);
+}
+
+/* After every operation, we need to restore the IO chain for XIP to work. */
+static void aspi_setup_xip_read_chain(struct anarion_qspi *aspi,
+ struct spi_nor *nor)
+{
+ struct qspi_io_chain chain[] = {
+ {CHAIN_CMD, nor->read_opcode, 1, aspi->xfer_mode_cmd},
+ {CHAIN_ADDR, 0, nor->addr_width, aspi->xfer_mode_addr},
+ {CHAIN_HI_Z, 0, aspi->num_hi_z_clocks, aspi->xfer_mode_addr},
+ {CHAIN_DATA_IN, 0, ASPI_DATA_LEN_MASK, aspi->xfer_mode_data},
+ };
+
+ aspi_setup_chain(aspi, chain, ARRAY_SIZE(chain));
+}
+
+static int aspi_do_write_xfer(struct anarion_qspi *aspi,
+ struct spi_nor *nor, uint32_t addr,
+ const void *buf, size_t len)
+{
+ struct qspi_io_chain chain[] = {
+ {CHAIN_CMD, nor->program_opcode, 1, MODE_IO_X1},
+ {CHAIN_ADDR, addr, nor->addr_width, MODE_IO_X1},
+ {CHAIN_DATA_OUT, 0, len, MODE_IO_X1},
+ };
+
+ aspi_setup_chain(aspi, chain, ARRAY_SIZE(chain));
+
+ /* Go, johnny go */
+ aspi_write_reg(aspi, ASPI_REG_GO, 1);
+
+ aspi_poll_and_seed_fifo(aspi, buf, len);
+ return aspi_wait_idle(aspi);
+}
+
+/*
+ * While we could send read commands manually to the flash chip, we'd have to
+ * get data back through the DATA2 register. That is on the AHB bus, whereas
+ * XIP reads go over AXI. Hence, we use the memory-mapped flash space for read.
+ * TODO: Look at using DMA instead of memcpy().
+ */
+static ssize_t anarion_spi_nor_read(struct spi_nor *nor, loff_t from,
+ size_t len, uint8_t *read_buf)
+{
+ struct anarion_qspi *aspi = nor->priv;
+ void *from_xip = (void *)(aspi->xipbase + from);
+
+ aspi_setup_xip_read_chain(aspi, nor);
+ memcpy(read_buf, from_xip, len);
+
+ return len;
+}
+
+static ssize_t anarion_spi_nor_write(struct spi_nor *nor, loff_t to,
+ size_t len, const uint8_t *src)
+{
+ int ret;
+ struct anarion_qspi *aspi = nor->priv;
+
+ if (len > nor->page_size)
+ return -EINVAL;
+
+ ret = aspi_do_write_xfer(aspi, nor, to, src, len);
+ return (ret < 0) ? ret : len;
+}
+
+/* TODO: Revisit this when we get actual HW. Right now max speed is 6 MHz. */
+static void aspi_configure_clocks(struct anarion_qspi *aspi)
+{
+ uint8_t div = 0;
+ uint32_t ck_ctl = aspi_read_reg(aspi, ASPI_REG_CLOCK);
+
+ ck_ctl &= ~ASPI_CLOCK_DIV_MASK;
+ ck_ctl |= ASPI_CLOCK_DIV(div);
+ aspi_write_reg(aspi, ASPI_REG_CLOCK, ck_ctl);
+}
+
+static int anarion_qspi_drv_probe(struct platform_device *pdev)
+{
+ int ret;
+ void __iomem *mmiobase;
+ struct resource *res;
+ struct anarion_qspi *aspi;
+ struct device_node *flash_node;
+ struct spi_nor *nor;
+
+ /* TODO: Test faster modes. Controller supports DUAL/QUAD/DTR modes. */
+ const struct spi_nor_hwcaps hwcaps = {
+ .mask = SNOR_HWCAPS_READ | SNOR_HWCAPS_READ_FAST |
+ SNOR_HWCAPS_PP,
+ };
+
+ aspi = devm_kzalloc(&pdev->dev, sizeof(*aspi), GFP_KERNEL);
+ if (!aspi)
+ return -ENOMEM;
+ platform_set_drvdata(pdev, aspi);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ mmiobase = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(mmiobase)) {
+ dev_err(&pdev->dev, "Cannot get base addresses (%ld)!\n",
+ PTR_ERR(mmiobase));
+ return PTR_ERR(mmiobase);
+ }
+ aspi->regbase = (uintptr_t)mmiobase;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ mmiobase = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(mmiobase)) {
+ dev_err(&pdev->dev, "Cannot get XIP addresses (%ld)!\n",
+ PTR_ERR(mmiobase));
+ return PTR_ERR(mmiobase);
+ }
+ aspi->xipbase = (uintptr_t)mmiobase;
+
+ aspi->dev = &pdev->dev;
+
+ /* only support one attached flash */
+ flash_node = of_get_next_available_child(pdev->dev.of_node, NULL);
+ if (!flash_node) {
+ dev_err(&pdev->dev, "no SPI flash device to configure\n");
+ return -ENODEV;
+ }
+
+ /* Reset the controller */
+ aspi_write_reg(aspi, ASPI_REG_CLOCK, ASPI_CLK_RESET_ALL);
+ aspi_write_reg(aspi, ASPI_REG_LAT, 0x010);
+ aspi_configure_clocks(aspi);
+
+ nor = &aspi->nor;
+ nor->priv = aspi;
+ nor->dev = aspi->dev;
+ nor->read = anarion_spi_nor_read;
+ nor->write = anarion_spi_nor_write;
+ nor->read_reg = anarion_spi_read_nor_reg;
+ nor->write_reg = anarion_spi_write_nor_reg;
+
+ spi_nor_set_flash_node(nor, flash_node);
+
+ ret = spi_nor_scan(&aspi->nor, NULL, &hwcaps);
+ if (ret)
+ return ret;
+
+ /* TODO: Add _and_test_ support for DUAL/QUAD modes */
+ switch (nor->read_proto) {
+ case SNOR_PROTO_1_1_1:
+ aspi->num_hi_z_clocks = nor->read_dummy;
+ aspi->xfer_mode_cmd = MODE_IO_X1;
+ aspi->xfer_mode_addr = MODE_IO_X1;
+ aspi->xfer_mode_data = MODE_IO_X1;
+ break;
+ default:
+ dev_err(&pdev->dev, "Unsupported QSPI protocol (%x)\n",
+ nor->read_proto);
+ return -ENOTSUPP;
+ }
+
+ aspi_setup_xip_read_chain(aspi, nor);
+
+ mtd_device_register(&aspi->nor.mtd, NULL, 0);
+
+ return 0;
+}
+
+static int anarion_qspi_drv_remove(struct platform_device *pdev)
+{
+ struct anarion_qspi *aspi = platform_get_drvdata(pdev);
+
+ mtd_device_unregister(&aspi->nor.mtd);
+ return 0;
+}
+
+static const struct of_device_id anarion_qspi_of_match[] = {
+ { .compatible = "adaptrum,anarion-qspi" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, anarion_qspi_of_match);
+
+static struct platform_driver anarion_qspi_driver = {
+ .driver = {
+ .name = "anarion-qspi",
+ .of_match_table = anarion_qspi_of_match,
+ },
+ .probe = anarion_qspi_drv_probe,
+ .remove = anarion_qspi_drv_remove,
+};
+module_platform_driver(anarion_qspi_driver);
+
+MODULE_DESCRIPTION("Adaptrum Anarion Quad SPI Controller Driver");
+MODULE_AUTHOR("Alexandru Gagniuc <mr.nuke.me@xxxxxxxxx>");
+MODULE_LICENSE("GPL v2");
--
2.9.3