[PATCH 2/2] ARM: dts: am572x-idk: Fix GPIO polarity for MMC1 card detect

[Kishon Vijay Abraham I]

The GPIO polarity for MMC1 card detect is set to '0' which means
active-high. However the polarity should be active-low. Fix it
here.

Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
 arch/arm/boot/dts/am572x-idk.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
index 9da6d83ca185..940fcbe5380b 100644
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -81,7 +81,7 @@
 	vmmc-supply = <&v3_3d>;
 	vmmc_aux-supply = <&ldo1_reg>;
 	bus-width = <4>;
-	cd-gpios = <&gpio6 27 0>; /* gpio 219 */
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
 };
 
 &sn65hvs882 {
-- 
2.11.0