Re: [PATCH 15/18] power: supply: bq24190_charger: Get input_current_limit from our supplier

[Liam Breck]

Hallo Hans :-)


On Sun, Aug 6, 2017 at 5:35 AM, Hans de Goede <hdegoede@xxxxxxxxxx> wrote:
> On some devices the USB Type-C port power (USB PD 2.0) negotiation is
> done by a separate port-controller IC, while the current limit is
> controlled through another (charger) IC.
>
> It has been decided to model this by modelling the external Type-C
> power brick (adapter/charger) as a power-supply class device which
> supplies the charger-IC, with its voltage-now and current-max representing
> the negotiated voltage and max current draw.
>
> This commit adds support for this to the bq24190_charger driver by calling
> power_supply_set_input_current_limit_from_supplier helper if the
> "input-current-limit-from-supplier" device-property is set.
>
> Note this replaces the functionality to get the current-limit from an
> extcon device, which will be removed in a follow-up commit.
>
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> ---
>  drivers/power/supply/bq24190_charger.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
>
> diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
> index d78e2c6dc127..1f6424f0772f 100644
> --- a/drivers/power/supply/bq24190_charger.c
> +++ b/drivers/power/supply/bq24190_charger.c
> @@ -161,6 +161,7 @@ struct bq24190_dev_info {
>         char                            model_name[I2C_NAME_SIZE];
>         bool                            initialized;
>         bool                            irq_event;
> +       bool                            input_current_limit_from_supplier;
>         struct mutex                    f_reg_lock;
>         u8                              f_reg;
>         u8                              ss_reg;
> @@ -1137,6 +1138,14 @@ static int bq24190_charger_property_is_writeable(struct power_supply *psy,
>         return ret;
>  }
>
> +static void bq24190_charger_external_power_changed(struct power_supply *psy)
> +{
> +       struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
> +
> +       if (bdi->input_current_limit_from_supplier)
> +               power_supply_set_input_current_limit_from_supplier(psy);
> +}
> +
>  static enum power_supply_property bq24190_charger_properties[] = {
>         POWER_SUPPLY_PROP_CHARGE_TYPE,
>         POWER_SUPPLY_PROP_HEALTH,
> @@ -1165,6 +1174,7 @@ static const struct power_supply_desc bq24190_charger_desc = {
>         .get_property           = bq24190_charger_get_property,
>         .set_property           = bq24190_charger_set_property,
>         .property_is_writeable  = bq24190_charger_property_is_writeable,
> +       .external_power_changed = bq24190_charger_external_power_changed,
>  };
>
>  /* Battery power supply property routines */
> @@ -1654,6 +1664,10 @@ static int bq24190_probe(struct i2c_client *client,
>                 return -EINVAL;
>         }
>
> +       bdi->input_current_limit_from_supplier =
> +               device_property_read_bool(dev,
> +                                         "input-current-limit-from-supplier");

Since this invokes the new power_supply_class function, should this be
a devicetree property, not just a driver-to-driver switch? If so, the
property name should probably be defined in
Doc...bindings/power/supply/power_supply.txt.

My latest bq24190 series has a new DT doc, which should ref a new DT property.