Re: Re: kvm_intel fails to load on Conroe CPUs running Linux 4.12
From: Niall Walsh
Date: Tue Aug 08 2017 - 17:49:16 EST
Hi,
On 07/08/17 18:50, Paolo Bonzini wrote:
Given the rarity of your machine I'm currently leaning towards _not_
reverting the change. I'll check another non-Xeon Core 2 tomorrow that
is from December 2008 (IIRC). If that one also lacks vNMI, or if I get
other reports, I suppose I will have to reconsider that.
afraid I've the same issue with 4.12, kvm_intel doesn't load and won't
(but does on 4.11) on my Dell XPS M1210 with a Core 2 Duo T7200 from
April 2007.
cpuinfo and vmxcap output attached
Thanks,
Niall
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz
stepping : 6
microcode : 0xc7
cpu MHz : 1000.000
cache size : 4096 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl cpuid aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm tpr_shadow dtherm
bugs :
bogomips : 3994.63
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz
stepping : 6
microcode : 0xc7
cpu MHz : 1000.000
cache size : 4096 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl cpuid aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm tpr_shadow dtherm
bugs :
bogomips : 3994.45
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
Basic VMX Information
Hex: 0x1a040000000007
Revision 7
VMCS size 1024
VMCS restricted to 32 bit addresses no
Dual-monitor support yes
VMCS memory type 6
INS/OUTS instruction information no
IA32_VMX_TRUE_*_CTLS support no
pin-based controls
External interrupt exiting yes
NMI exiting yes
Virtual NMIs no
Activate VMX-preemption timer no
Process posted interrupts no
primary processor-based controls
Interrupt window exiting yes
Use TSC offsetting yes
HLT exiting yes
INVLPG exiting yes
MWAIT exiting yes
RDPMC exiting yes
RDTSC exiting yes
CR3-load exiting forced
CR3-store exiting forced
CR8-load exiting yes
CR8-store exiting yes
Use TPR shadow yes
NMI-window exiting no
MOV-DR exiting yes
Unconditional I/O exiting yes
Use I/O bitmaps yes
Monitor trap flag no
Use MSR bitmaps yes
MONITOR exiting yes
PAUSE exiting yes
Activate secondary control no
secondary processor-based controls
Virtualize APIC accesses no
Enable EPT no
Descriptor-table exiting no
Enable RDTSCP no
Virtualize x2APIC mode no
Enable VPID no
WBINVD exiting no
Unrestricted guest no
APIC register emulation no
Virtual interrupt delivery no
PAUSE-loop exiting no
RDRAND exiting no
Enable INVPCID no
Enable VM functions no
VMCS shadowing no
Enable ENCLS exiting no
RDSEED exiting no
Enable PML no
EPT-violation #VE no
Conceal non-root operation from PT no
Enable XSAVES/XRSTORS no
Mode-based execute control (XS/XU) no
TSC scaling no
VM-Exit controls
Save debug controls forced
Host address-space size yes
Load IA32_PERF_GLOBAL_CTRL no
Acknowledge interrupt on exit yes
Save IA32_PAT no
Load IA32_PAT no
Save IA32_EFER no
Load IA32_EFER no
Save VMX-preemption timer value no
Clear IA32_BNDCFGS no
Conceal VM exits from PT no
VM-Entry controls
Load debug controls forced
IA-32e mode guest yes
Entry to SMM yes
Deactivate dual-monitor treatment yes
Load IA32_PERF_GLOBAL_CTRL no
Load IA32_PAT no
Load IA32_EFER no
Load IA32_BNDCFGS no
Conceal VM entries from PT no
Miscellaneous data
Hex: 0x403c0
VMX-preemption timer scale (log2) 0
Store EFER.LMA into IA-32e mode guest control no
HLT activity state yes
Shutdown activity state yes
Wait-for-SIPI activity state yes
IA32_SMBASE support no
Number of CR3-target values 4
MSR-load/store count recommendation 0
IA32_SMM_MONITOR_CTL[2] can be set to 1 no
VMWRITE to VM-exit information fields no
Inject event with insn length=0 no
MSEG revision identifier 0
VPID and EPT capabilities
Hex: 0x0
Execute-only EPT translations no
Page-walk length 4 no
Paging-structure memory type UC no
Paging-structure memory type WB no
2MB EPT pages no
1GB EPT pages no
INVEPT supported no
EPT accessed and dirty flags no
Single-context INVEPT no
All-context INVEPT no
INVVPID supported no
Individual-address INVVPID no
Single-context INVVPID no
All-context INVVPID no
Single-context-retaining-globals INVVPID no
VM Functions
Hex: 0x0
EPTP Switching no