[PATCH v4 06/12] net: stmmac: dwmac-rk: Add internal phy support
From: David Wu
Date: Wed Aug 09 2017 - 08:06:29 EST
To make internal phy work, need to configure the phy_clock,
phy cru_reset and related registers.
Signed-off-by: David Wu <david.wu@xxxxxxxxxxxxxx>
---
change in v4:
- PHY is internal or not base on the phy-is-internal property via phy node.
.../devicetree/bindings/net/rockchip-dwmac.txt | 4 +-
drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 88 ++++++++++++++++++++++
2 files changed, 91 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
index 8f42755..4f51305 100644
--- a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
+++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt
@@ -25,7 +25,8 @@ Required properties:
- clock-names: One name for each entry in the clocks property.
- phy-mode: See ethernet.txt file in the same directory.
- pinctrl-names: Names corresponding to the numbered pinctrl states.
- - pinctrl-0: pin-control mode. can be <&rgmii_pins> or <&rmii_pins>.
+ - pinctrl-0: pin-control mode. can be <&rgmii_pins>, <&rmii_pins> or led pins
+ for internal phy mode.
- clock_in_out: For RGMII, it must be "input", means main clock(125MHz)
is not sourced from SoC's PLL, but input from PHY; For RMII, "input" means
PHY provides the reference clock(50MHz), "output" means GMAC provides the
@@ -40,6 +41,7 @@ Optional properties:
- tx_delay: Delay value for TXD timing. Range value is 0~0x7F, 0x30 as default.
- rx_delay: Delay value for RXD timing. Range value is 0~0x7F, 0x10 as default.
- phy-supply: phandle to a regulator if the PHY needs one
+ - clocks: <&cru MAC_PHY>: Clock selector for internal macphy
Example:
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index a8e8fd5..a856362 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -41,6 +41,7 @@ struct rk_gmac_ops {
void (*set_to_rmii)(struct rk_priv_data *bsp_priv);
void (*set_rgmii_speed)(struct rk_priv_data *bsp_priv, int speed);
void (*set_rmii_speed)(struct rk_priv_data *bsp_priv, int speed);
+ void (*internal_phy_powerup)(struct rk_priv_data *bsp_priv);
};
struct rk_priv_data {
@@ -52,6 +53,7 @@ struct rk_priv_data {
bool clk_enabled;
bool clock_input;
+ bool internal_phy;
struct clk *clk_mac;
struct clk *gmac_clkin;
@@ -61,6 +63,9 @@ struct rk_priv_data {
struct clk *clk_mac_refout;
struct clk *aclk_mac;
struct clk *pclk_mac;
+ struct clk *clk_macphy;
+
+ struct reset_control *macphy_reset;
int tx_delay;
int rx_delay;
@@ -750,6 +755,50 @@ static void rk3399_set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
.set_rmii_speed = rk3399_set_rmii_speed,
};
+#define RK_GRF_MACPHY_CON0 0xb00
+#define RK_GRF_MACPHY_CON1 0xb04
+#define RK_GRF_MACPHY_CON2 0xb08
+#define RK_GRF_MACPHY_CON3 0xb0c
+
+#define RK_MACPHY_ENABLE GRF_BIT(0)
+#define RK_MACPHY_DISABLE GRF_CLR_BIT(0)
+#define RK_MACPHY_CFG_CLK_50M GRF_BIT(14)
+#define RK_GMAC2PHY_RMII_MODE (GRF_BIT(6) | GRF_CLR_BIT(7))
+#define RK_GRF_CON2_MACPHY_ID HIWORD_UPDATE(0x1234, 0xffff, 0)
+#define RK_GRF_CON3_MACPHY_ID HIWORD_UPDATE(0x35, 0x3f, 0)
+
+static void rk_gmac_internal_phy_powerup(struct rk_priv_data *priv)
+{
+ if (priv->ops->internal_phy_powerup)
+ priv->ops->internal_phy_powerup(priv);
+
+ regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_MACPHY_CFG_CLK_50M);
+ regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_GMAC2PHY_RMII_MODE);
+
+ regmap_write(priv->grf, RK_GRF_MACPHY_CON2, RK_GRF_CON2_MACPHY_ID);
+ regmap_write(priv->grf, RK_GRF_MACPHY_CON3, RK_GRF_CON3_MACPHY_ID);
+
+ if (priv->macphy_reset) {
+ /* macphy needs to be disabled before trying to reset it */
+ regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_MACPHY_DISABLE);
+ if (priv->macphy_reset)
+ reset_control_assert(priv->macphy_reset);
+ usleep_range(10, 20);
+ if (priv->macphy_reset)
+ reset_control_deassert(priv->macphy_reset);
+ usleep_range(10, 20);
+ regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_MACPHY_ENABLE);
+ msleep(30);
+ }
+}
+
+static void rk_gmac_internal_phy_powerdown(struct rk_priv_data *priv)
+{
+ regmap_write(priv->grf, RK_GRF_MACPHY_CON0, RK_MACPHY_DISABLE);
+ if (priv->macphy_reset)
+ reset_control_assert(priv->macphy_reset);
+}
+
static int gmac_clk_init(struct rk_priv_data *bsp_priv)
{
struct device *dev = &bsp_priv->pdev->dev;
@@ -803,6 +852,14 @@ static int gmac_clk_init(struct rk_priv_data *bsp_priv)
clk_set_rate(bsp_priv->clk_mac, 50000000);
}
+ if (bsp_priv->internal_phy) {
+ bsp_priv->clk_macphy = devm_clk_get(dev, "clk_macphy");
+ if (IS_ERR(bsp_priv->clk_macphy))
+ dev_err(dev, "cannot get %s clock\n", "clk_macphy");
+ else
+ clk_set_rate(bsp_priv->clk_macphy, 50000000);
+ }
+
return 0;
}
@@ -826,6 +883,9 @@ static int gmac_clk_enable(struct rk_priv_data *bsp_priv, bool enable)
bsp_priv->clk_mac_refout);
}
+ if (!IS_ERR(bsp_priv->clk_macphy))
+ clk_prepare_enable(bsp_priv->clk_macphy);
+
if (!IS_ERR(bsp_priv->aclk_mac))
clk_prepare_enable(bsp_priv->aclk_mac);
@@ -858,6 +918,9 @@ static int gmac_clk_enable(struct rk_priv_data *bsp_priv, bool enable)
bsp_priv->clk_mac_refout);
}
+ if (!IS_ERR(bsp_priv->clk_macphy))
+ clk_disable_unprepare(bsp_priv->clk_macphy);
+
if (!IS_ERR(bsp_priv->aclk_mac))
clk_disable_unprepare(bsp_priv->aclk_mac);
@@ -909,6 +972,7 @@ static struct rk_priv_data *rk_gmac_setup(struct platform_device *pdev,
int ret;
const char *strings = NULL;
int value;
+ struct device_node *phy_node;
bsp_priv = devm_kzalloc(dev, sizeof(*bsp_priv), GFP_KERNEL);
if (!bsp_priv)
@@ -940,6 +1004,24 @@ static struct rk_priv_data *rk_gmac_setup(struct platform_device *pdev,
bsp_priv->clock_input = false;
}
+ /* If phy-handle property is passed from DT, use it as the PHY */
+ phy_node = of_parse_phandle(dev->of_node, "phy-handle", 0);
+ if (phy_node) {
+ bsp_priv->internal_phy = of_property_read_bool(phy_node,
+ "phy-is-internal");
+ if (bsp_priv->internal_phy) {
+ bsp_priv->macphy_reset = devm_reset_control_get(dev,
+ "mac-phy");
+ if (IS_ERR(bsp_priv->macphy_reset)) {
+ dev_info(dev, "no macphy_reset control found\n");
+ bsp_priv->macphy_reset = NULL;
+ }
+ }
+ }
+
+ dev_info(dev, "internal PHY? (%s).\n",
+ bsp_priv->internal_phy ? "yes" : "no");
+
ret = of_property_read_u32(dev->of_node, "tx_delay", &value);
if (ret) {
bsp_priv->tx_delay = 0x30;
@@ -1014,6 +1096,9 @@ static int rk_gmac_powerup(struct rk_priv_data *bsp_priv)
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
+ if (bsp_priv->internal_phy)
+ rk_gmac_internal_phy_powerup(bsp_priv);
+
return 0;
}
@@ -1021,6 +1106,9 @@ static void rk_gmac_powerdown(struct rk_priv_data *gmac)
{
struct device *dev = &gmac->pdev->dev;
+ if (gmac->internal_phy)
+ rk_gmac_internal_phy_powerdown(gmac);
+
pm_runtime_put_sync(dev);
pm_runtime_disable(dev);
--
1.9.1