[PATCH V11 0/3] powernv : Add support for OPAL-OCC command/response interface

[Shilpasri G Bhat]

In P9, OCC (On-Chip-Controller) supports shared memory based
commad-response interface. Within the shared memory there is an OPAL
command buffer and OCC response buffer that can be used to send
inband commands to OCC. The following commands are supported:

1) Set system powercap
2) Set CPU-GPU power shifting ratio
3) Clear min/max for OCC sensor groups

Changes from V10:
- Rebased on powerpc-next
- Add sysfs interface instead of IOCTL
  (Skiboot patch for Patch3 is posted below:
  https://lists.ozlabs.org/pipermail/skiboot/2017-August/008553.html )

Shilpasri G Bhat (3):
  powernv: powercap: Add support for powercap framework
  powernv: Add support to set power-shifting-ratio
  powernv: Add support to clear sensor groups data

 .../ABI/testing/sysfs-firmware-opal-powercap       |  31 +++
 Documentation/ABI/testing/sysfs-firmware-opal-psr  |  18 ++
 .../bindings/powerpc/opal/sensor-groups.txt        |  27 +++
 arch/powerpc/include/asm/opal-api.h                |   6 +
 arch/powerpc/include/asm/opal.h                    |  10 +
 arch/powerpc/platforms/powernv/Makefile            |   2 +-
 arch/powerpc/platforms/powernv/opal-powercap.c     | 244 +++++++++++++++++++++
 arch/powerpc/platforms/powernv/opal-psr.c          | 175 +++++++++++++++
 .../powerpc/platforms/powernv/opal-sensor-groups.c | 212 ++++++++++++++++++
 arch/powerpc/platforms/powernv/opal-wrappers.S     |   5 +
 arch/powerpc/platforms/powernv/opal.c              |  10 +
 11 files changed, 739 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/ABI/testing/sysfs-firmware-opal-powercap
 create mode 100644 Documentation/ABI/testing/sysfs-firmware-opal-psr
 create mode 100644 Documentation/devicetree/bindings/powerpc/opal/sensor-groups.txt
 create mode 100644 arch/powerpc/platforms/powernv/opal-powercap.c
 create mode 100644 arch/powerpc/platforms/powernv/opal-psr.c
 create mode 100644 arch/powerpc/platforms/powernv/opal-sensor-groups.c

-- 
1.8.3.1