Re: [PATCH] arm: boot: dts: artpec6: Remove unnecessary interrupt-parent property from sub-nodes

[Surender Polsani]

On Tuesday 27 June 2017 05:57 PM, Niklas Cassel wrote:
> Acked-by: Niklas Cassel <niklas.cassel@xxxxxxxx>

Hi Nik, This patch has been Acknowledged but is not getting added / 
applied to the
respective git source tree. Please let me know if there is any problem.

Thanks
Surender
> On 06/27/2017 02:15 PM, surenderp@xxxxxxxxxxxx wrote:
> > From: Surender Polsani <surenderp@xxxxxxxxxxxx>
> >
> > "interrupt-parent" property is declared in root node, so it is global
> > to all nodes. This property is re-declared in few sub-nodes. To avoid
> > duplication this property is removed from following sub-nodes:
> > pmu, amba@0, amba@0/ethernet.
> >
> > Signed-off-by: Surender Polsani <surenderp@xxxxxxxxxxxx>
> > ---
> >   arch/arm/boot/dts/artpec6.dtsi | 3 ---
> >   1 file changed, 3 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi
> > index 767cbe8..2ed1177 100644
> > --- a/arch/arm/boot/dts/artpec6.dtsi
> > +++ b/arch/arm/boot/dts/artpec6.dtsi
> > @@ -151,7 +151,6 @@
> >   		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
> >   			<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> >   		interrupt-affinity = <&cpu0>, <&cpu1>;
> > -		interrupt-parent = <&intc>;
> >   	};
> >   
> >   	pcie: pcie@f8050000 {
> > @@ -185,7 +184,6 @@
> >   		compatible = "simple-bus";
> >   		#address-cells = <0x1>;
> >   		#size-cells = <0x1>;
> > -		interrupt-parent = <&intc>;
> >   		ranges;
> >   		dma-ranges = <0x80000000 0x00000000 0x40000000>;
> >   		dma-coherent;
> > @@ -195,7 +193,6 @@
> >   			clocks = <&eth_phy_ref_clk>,
> >   				<&clkctrl ARTPEC6_CLK_ETH_ACLK>;
> >   			compatible = "snps,dwc-qos-ethernet-4.10";
> > -			interrupt-parent = <&intc>;
> >   			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> >   			reg = <0xf8010000 0x4000>;
> >