[PATCH v4 17/20] dt-bindings: qcom_nandc: IPQ4019 QPIC NAND documentation
From: Abhishek Sahu
Date: Fri Aug 11 2017 - 07:41:22 EST
1. Qualcom IPQ4019 SoC uses QPIC NAND controller version 1.4.0
which uses BAM DMA Engine while IPQ806x uses EBI2 NAND
which uses ADM DMA Engine.
2. QPIC NAND will 3 BAM channels: command, data tx and data rx
while EBI2 NAND uses only single ADM channel.
3. CRCI is only required for ADM DMA and its not required for
BAM DMA.
Acked-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/mtd/qcom_nandc.txt | 55 +++++++++++++++++++++-
1 file changed, 54 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
index f475b65..d93b952 100644
--- a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
+++ b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt
@@ -1,11 +1,18 @@
* Qualcomm NAND controller
Required properties:
-- compatible: should be "qcom,ipq806x-nand"
+- compatible: must be one of the following:
+ * "qcom,ipq806x-nand" - for EBI2 NAND controller being used in IPQ806x
+ SoC and it uses ADM DMA
+ * "qcom,ipq4019-nand" - for QPIC NAND controller v1.4.0 being used in
+ IPQ4019 SoC and it uses BAM DMA
+
- reg: MMIO address range
- clocks: must contain core clock and always on clock
- clock-names: must contain "core" for the core clock and "aon" for the
always on clock
+
+EBI2 specific properties:
- dmas: DMA specifier, consisting of a phandle to the ADM DMA
controller node and the channel number to be used for
NAND. Refer to dma.txt and qcom_adm.txt for more details
@@ -16,6 +23,12 @@ Required properties:
- qcom,data-crci: must contain the ADM data type CRCI block instance
number specified for the NAND controller on the given
platform
+
+QPIC specific properties:
+- dmas: DMA specifier, consisting of a phandle to the BAM DMA
+ and the channel number to be used for NAND. Refer to
+ dma.txt, qcom_bam_dma.txt for more details
+- dma-names: must contain all 3 channel names : "tx", "rx", "cmd"
- #address-cells: <1> - subnodes give the chip-select number
- #size-cells: <0>
@@ -82,3 +95,43 @@ nand-controller@1ac00000 {
};
};
};
+
+nand-controller@79b0000 {
+ compatible = "qcom,ipq4019-nand";
+ reg = <0x79b0000 0x1000>;
+
+ clocks = <&gcc GCC_QPIC_CLK>,
+ <&gcc GCC_QPIC_AHB_CLK>;
+ clock-names = "core", "aon";
+
+ dmas = <&qpicbam 0>,
+ <&qpicbam 1>,
+ <&qpicbam 2>;
+ dma-names = "tx", "rx", "cmd";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nand@0 {
+ reg = <0>;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "boot-nand";
+ reg = <0 0x58a0000>;
+ };
+
+ partition@58a0000 {
+ label = "fs-nand";
+ reg = <0x58a0000 0x4000000>;
+ };
+ };
+ };
+};
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation