Re: linux-next: manual merge of the pm tree with the tty.current tree

[Greg KH]

On Fri, Aug 11, 2017 at 12:00:47PM +1000, Stephen Rothwell wrote:
> Hi Rafael,
> 
> Today's linux-next merge of the pm tree got a conflict in:
> 
>   drivers/acpi/spcr.c
> 
> between commit:
> 
>   37ef38f3f838 ("tty: pl011: fix initialization order of QDF2400 E44")
> 
> from the tty.current tree and commit:
> 
>   01c5210cad90 ("ACPI: SPCR: work around clock issue on xgene UART")
> 
> from the pm tree.
> 
> I fixed it up (see below) and can carry the fix as necessary. This
> is now fixed as far as linux-next is concerned, but any non trivial
> conflicts should be mentioned to your upstream maintainer when your tree
> is submitted for merging.  You may also want to consider cooperating
> with the maintainer of the conflicting tree to minimise any particularly
> complex conflicts.
> 
> -- 
> Cheers,
> Stephen Rothwell
> 
> diff --cc drivers/acpi/spcr.c
> index 98aa8c808a33,48a7efc28ebb..000000000000
> --- a/drivers/acpi/spcr.c
> +++ b/drivers/acpi/spcr.c
> @@@ -157,35 -155,21 +165,43 @@@ int __init parse_spcr(bool earlycon
>   		goto done;
>   	}
>   
>  -	if (qdf2400_erratum_44_present(&table->header))
>  -		uart = "qdf2400_e44";
>  +	/*
>  +	 * If the E44 erratum is required, then we need to tell the pl011
>  +	 * driver to implement the work-around.
>  +	 *
>  +	 * The global variable is used by the probe function when it
>  +	 * creates the UARTs, whether or not they're used as a console.
>  +	 *
>  +	 * If the user specifies "traditional" earlycon, the qdf2400_e44
>  +	 * console name matches the EARLYCON_DECLARE() statement, and
>  +	 * SPCR is not used.  Parameter "earlycon" is false.
>  +	 *
>  +	 * If the user specifies "SPCR" earlycon, then we need to update
>  +	 * the console name so that it also says "qdf2400_e44".  Parameter
>  +	 * "earlycon" is true.
>  +	 *
>  +	 * For consistency, if we change the console name, then we do it
>  +	 * for everyone, not just earlycon.
>  +	 */
>  +	if (qdf2400_erratum_44_present(&table->header)) {
>  +		qdf2400_e44_present = true;
>  +		if (earlycon)
>  +			uart = "qdf2400_e44";
>  +	}
>  +
> - 	if (xgene_8250_erratum_present(table))
> + 	if (xgene_8250_erratum_present(table)) {
>   		iotype = "mmio32";
>   
> - 	snprintf(opts, sizeof(opts), "%s,%s,0x%llx,%d", uart, iotype,
> - 		 table->serial_port.address, baud_rate);
> + 		/* for xgene v1 and v2 we don't know the clock rate of the
> + 		 * UART so don't attempt to change to the baud rate state
> + 		 * in the table because driver cannot calculate the dividers
> + 		 */
> + 		snprintf(opts, sizeof(opts), "%s,%s,0x%llx", uart, iotype,
> + 			 table->serial_port.address);
> + 	} else {
> + 		snprintf(opts, sizeof(opts), "%s,%s,0x%llx,%d", uart, iotype,
> + 			 table->serial_port.address, baud_rate);
> + 	}
>   
>   	pr_info("console: %s\n", opts);
>   

Fix looks good to me, thanks!

greg k-h