Re: [linux-sunxi] Re: [PATCH v6 1/6] clk: sunxi-ng: div: Add support for fixed post-divider

From: Chen-Yu Tsai
Date: Sat Aug 12 2017 - 00:14:22 EST


On Sat, Aug 12, 2017 at 11:07 AM, <icenowy@xxxxxxx> wrote:
> å 2017-07-17 16:52ïMaxime Ripard åéï
>>
>> On Fri, Jul 14, 2017 at 05:49:23PM +0300, Priit Laes wrote:
>>>
>>> SATA clock on sun4i/sun7i is of type (parent) / M / 6 where
>>> 6 is fixed post-divider.
>>>
>>> Signed-off-by: Priit Laes <plaes@xxxxxxxxx>
>>> ---
>>> drivers/clk/sunxi-ng/ccu_div.c | 15 +++++++++++++--
>>> drivers/clk/sunxi-ng/ccu_div.h | 3 ++-
>>> 2 files changed, 15 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/clk/sunxi-ng/ccu_div.c
>>> b/drivers/clk/sunxi-ng/ccu_div.c
>>> index c0e5c10..744502a 100644
>>> --- a/drivers/clk/sunxi-ng/ccu_div.c
>>> +++ b/drivers/clk/sunxi-ng/ccu_div.c
>>> @@ -21,6 +21,9 @@ static unsigned long ccu_div_round_rate(struct
>>> ccu_mux_internal *mux,
>>> {
>>> struct ccu_div *cd = data;
>>>
>>> + if (cd->common.features & CCU_FEATURE_FIXED_POSTDIV)
>>> + rate *= cd->fixed_post_div;
>>> +
>>> return divider_round_rate_parent(&cd->common.hw, parent,
>>> rate, parent_rate,
>>> cd->div.table, cd->div.width,
>>
>>
>>
>> You still haven't addressed the biggest issue with this patch, see:
>> https://patchwork.kernel.org/patch/9825565/
>
>
> I think he has already did the changes suggested in the review.

Nope. Only half of it is fixed. First you "unapply" the post-divider,
i.e. multiply the rate by the divider. Then you pass it to
divider_round_rate_parent. You still have to reapply the divider
to the result. This last part is missing. This means the clock
rate returned by ccu_div_round_rate is going to be off.

Instead the return statement should be

return divider_round_rate_parent(...) / cd->fixed_post_div

ChenYu

>
> (P.S. during developing R40 CCU driver I found that pll-periph0-sata
> also needs this patch, so I'm rechecking it)
>
>>
>> Maxime
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxxx
> For more options, visit https://groups.google.com/d/optout.