RE: [PATCH V2] kernel/watchdog: fix spurious hard lockups

[Thomas Gleixner]

On Tue, 15 Aug 2017, Liang, Kan wrote:
> This patch which speed up the hrtimer (https://lkml.org/lkml/2017/6/26/685)
> is decent to fix the spurious hard lockups.
> Tested-by: Kan Liang <kan.liang@xxxxxxxxx>
> 
> Please consider to merge it into both mainline and stable tree.

Well, it 'fixes' the problem, but at the same time it imposes a higher
frequency of hrtimer interrupts and a higher frequency of soft lockup
thread wakeups. I'm not convinced that this is the right thing to do, even
if the patch itself is simple and small.

Did you run the patch which implements the low pass filter? Does it fix the
issue as well? It's slightly larger, but does not come with the downsides
of the real simple one. Appended for reference.

Thanks,

	tglx

8<---------------------
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -100,6 +100,7 @@ config X86
 	select GENERIC_STRNCPY_FROM_USER
 	select GENERIC_STRNLEN_USER
 	select GENERIC_TIME_VSYSCALL
+	select HARDLOCKUP_CHECK_TIMESTAMP	if X86_64
 	select HAVE_ACPI_APEI			if ACPI
 	select HAVE_ACPI_APEI_NMI		if ACPI
 	select HAVE_ALIGNED_STRUCT_PAGE		if SLUB
--- a/include/linux/nmi.h
+++ b/include/linux/nmi.h
@@ -168,6 +168,14 @@ extern int sysctl_hardlockup_all_cpu_bac
 #define sysctl_softlockup_all_cpu_backtrace 0
 #define sysctl_hardlockup_all_cpu_backtrace 0
 #endif
+
+#if defined(CONFIG_HARDLOCKUP_CHECK_TIMESTAMP) && \
+    defined(CONFIG_HARDLOCKUP_DETECTOR)
+void watchdog_update_hrtimer_threshold(u64 period);
+#else
+static inline void watchdog_update_hrtimer_threshold(u64 period) { }
+#endif
+
 extern bool is_hardlockup(void);
 struct ctl_table;
 extern int proc_watchdog(struct ctl_table *, int ,
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -240,6 +240,7 @@ static void set_sample_period(void)
 	 * hardlockup detector generates a warning
 	 */
 	sample_period = get_softlockup_thresh() * ((u64)NSEC_PER_SEC / 5);
+	watchdog_update_hrtimer_threshold(sample_period);
 }
 
 /* Commands for resetting the watchdog */
--- a/kernel/watchdog_hld.c
+++ b/kernel/watchdog_hld.c
@@ -37,6 +37,62 @@ void arch_touch_nmi_watchdog(void)
 }
 EXPORT_SYMBOL(arch_touch_nmi_watchdog);
 
+#ifdef CONFIG_HARDLOCKUP_CHECK_TIMESTAMP
+static DEFINE_PER_CPU(ktime_t, last_timestamp);
+static DEFINE_PER_CPU(unsigned int, nmi_rearmed);
+static ktime_t watchdog_hrtimer_sample_threshold __read_mostly;
+
+void watchdog_update_hrtimer_threshold(u64 period)
+{
+	/*
+	 * The hrtimer runs with a period of (watchdog_threshold * 2) / 5
+	 *
+	 * So it runs effectively with 2.5 times the rate of the NMI
+	 * watchdog. That means the hrtimer should fire 2-3 times before
+	 * the NMI watchdog expires. The NMI watchdog on x86 is based on
+	 * unhalted CPU cycles, so if Turbo-Mode is enabled the CPU cycles
+	 * might run way faster than expected and the NMI fires in a
+	 * smaller period than the one deduced from the nominal CPU
+	 * frequency. Depending on the Turbo-Mode factor this might be fast
+	 * enough to get the NMI period smaller than the hrtimer watchdog
+	 * period and trigger false positives.
+	 *
+	 * The sample threshold is used to check in the NMI handler whether
+	 * the minimum time between two NMI samples has elapsed. That
+	 * prevents false positives.
+	 *
+	 * Set this to 4/5 of the actual watchdog threshold period so the
+	 * hrtimer is guaranteed to fire at least once within the real
+	 * watchdog threshold.
+	 */
+	watchdog_hrtimer_sample_threshold = period * 2;
+}
+
+static bool watchdog_check_timestamp(void)
+{
+	ktime_t delta, now = ktime_get_mono_fast_ns();
+
+	delta = now - __this_cpu_read(last_timestamp);
+	if (delta < watchdog_hrtimer_sample_threshold) {
+		/*
+		 * If ktime is jiffies based, a stalled timer would prevent
+		 * jiffies from being incremented and the filter would look
+		 * at a stale timestamp and never trigger.
+		 */
+		if (__this_cpu_inc_return(nmi_rearmed) < 10)
+			return false;
+	}
+	__this_cpu_write(nmi_rearmed, 0);
+	__this_cpu_write(last_timestamp, now);
+	return true;
+}
+#else
+static inline bool watchdog_check_timestamp(void)
+{
+	return true;
+}
+#endif
+
 static struct perf_event_attr wd_hw_attr = {
 	.type		= PERF_TYPE_HARDWARE,
 	.config		= PERF_COUNT_HW_CPU_CYCLES,
@@ -61,6 +117,9 @@ static void watchdog_overflow_callback(s
 		return;
 	}
 
+	if (!watchdog_check_timestamp())
+		return;
+
 	/* check for a hardlockup
 	 * This is done by making sure our timer interrupt
 	 * is incrementing.  The timer interrupt should have
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -798,6 +798,13 @@ config HARDLOCKUP_DETECTOR_PERF
 	select SOFTLOCKUP_DETECTOR
 
 #
+# Enables a timestamp based low pass filter to compensate for perf based
+# hard lockup detection which runs too fast due to turbo modes.
+#
+config HARDLOCKUP_CHECK_TIMESTAMP
+	bool
+
+#
 # arch/ can define HAVE_HARDLOCKUP_DETECTOR_ARCH to provide their own hard
 # lockup detector rather than the perf based detector.
 #