[PATCH] MIPS: dts: ralink: Add Mediatek MT7628A SoC

[Harvey Hunt]

The MT7628A is the successor to the MT7620 and pin compatible with the
MT7688A, although the latter supports only a 1T1R antenna rather than
a 2T2R antenna.

This commit adds support for the following features:

- UART
- USB PHY
- EHCI
- Interrupt controller
- System controller
- Memory controller
- Reset controller

Signed-off-by: Harvey Hunt <harvey.hunt@xxxxxxxxxx>
Cc: John Crispin <john@xxxxxxxxxxx>
Cc: linux-mips@xxxxxxxxxxxxxx 
Cc: devicetree@xxxxxxxxxxxxxxx 
Cc: linux-kernel@xxxxxxxxxxxxxxx 
Cc: linux-mediatek@xxxxxxxxxxxxxxxxxxx 
---
 Documentation/devicetree/bindings/mips/ralink.txt |   1 +
 arch/mips/boot/dts/ralink/mt7628a.dtsi            | 125 ++++++++++++++++++++++
 2 files changed, 126 insertions(+)
 create mode 100644 arch/mips/boot/dts/ralink/mt7628a.dtsi

diff --git a/Documentation/devicetree/bindings/mips/ralink.txt b/Documentation/devicetree/bindings/mips/ralink.txt
index b35a8d0..a16e8d7 100644
--- a/Documentation/devicetree/bindings/mips/ralink.txt
+++ b/Documentation/devicetree/bindings/mips/ralink.txt
@@ -15,3 +15,4 @@ value must be one of the following values:
   ralink,rt5350-soc
   ralink,mt7620a-soc
   ralink,mt7620n-soc
+  ralink,mt7628a-soc
diff --git a/arch/mips/boot/dts/ralink/mt7628a.dtsi b/arch/mips/boot/dts/ralink/mt7628a.dtsi
new file mode 100644
index 0000000..8461fe9
--- /dev/null
+++ b/arch/mips/boot/dts/ralink/mt7628a.dtsi
@@ -0,0 +1,125 @@
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "ralink,mt7628a-soc";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "mti,mips24KEc";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	resetctrl: resetctrl {
+		compatible = "ralink,rt2880-reset";
+		#reset-cells = <1>;
+	};
+
+	cpuintc: cpuintc {
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		compatible = "mti,cpu-interrupt-controller";
+	};
+
+	palmbus@10000000 {
+		compatible = "palmbus";
+		reg = <0x10000000 0x200000>;
+		ranges = <0x0 0x10000000 0x1FFFFF>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sysc@0 {
+			compatible = "ralink,mt7620a-sysc";
+			reg = <0x0 0x100>;
+		};
+
+		intc: intc@200 {
+			compatible = "ralink,rt2880-intc";
+			reg = <0x200 0x100>;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			resets = <&resetctrl 9>;
+			reset-names = "intc";
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+
+			ralink,intc-registers = <0x9c 0xa0
+						 0x6c 0xa4
+						 0x80 0x78>;
+		};
+
+		memc@300 {
+			compatible = "ralink,mt7620a-memc";
+			reg = <0x300 0x100>;
+		};
+
+		uartlite@c00 {
+			compatible = "ns16550a";
+			reg = <0xc00 0x100>;
+
+			resets = <&resetctrl 12>;
+			reset-names = "uart0";
+
+			interrupt-parent = <&intc>;
+			interrupts = <20>;
+
+			reg-shift = <2>;
+		};
+
+		uart1@d00 {
+			compatible = "ns16550a";
+			reg = <0xd00 0x100>;
+
+			resets = <&resetctrl 19>;
+			reset-names = "uart1";
+
+			interrupt-parent = <&intc>;
+			interrupts = <21>;
+
+			reg-shift = <2>;
+		};
+
+		uart2@e00 {
+			compatible = "ns16550a";
+			reg = <0xe00 0x100>;
+
+			resets = <&resetctrl 20>;
+			reset-names = "uart2";
+
+			interrupt-parent = <&intc>;
+			interrupts = <22>;
+
+			reg-shift = <2>;
+		};
+	};
+
+	usbphy: uphy@10120000 {
+		compatible = "mediatek,mt7628-usbphy";
+		reg = <0x10120000 0x1000>;
+
+		#phy-cells = <0>;
+
+		resets = <&resetctrl 22 &resetctrl 25>;
+		reset-names = "host", "device";
+	};
+
+	ehci@101c0000 {
+		compatible = "generic-ehci";
+		reg = <0x101c0000 0x1000>;
+
+		phys = <&usbphy>;
+		phy-names = "usb";
+
+		interrupt-parent = <&intc>;
+		interrupts = <18>;
+	};
+};
-- 
2.7.4