[PATCH v2 03/14] staging: typec: fusb302: Set max supply voltage to 5V
From: Hans de Goede
Date: Tue Aug 15 2017 - 16:05:36 EST
Anything higher then 5V may damage hardware not capable of it, so
the only sane default here is 5V. If a board is able to handle a
higher voltage that should come from board specific data such as
device-tree and not be hard coded into the fusb302 code.
Cc: "Yueyao (Nathan) Zhu" <yueyao@xxxxxxxxxx>
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/staging/typec/fusb302/fusb302.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/typec/fusb302/fusb302.c b/drivers/staging/typec/fusb302/fusb302.c
index 03a3809..6baed06 100644
--- a/drivers/staging/typec/fusb302/fusb302.c
+++ b/drivers/staging/typec/fusb302/fusb302.c
@@ -1187,9 +1187,9 @@ static const struct tcpc_config fusb302_tcpc_config = {
.nr_src_pdo = ARRAY_SIZE(src_pdo),
.snk_pdo = snk_pdo,
.nr_snk_pdo = ARRAY_SIZE(snk_pdo),
- .max_snk_mv = 9000,
+ .max_snk_mv = 5000,
.max_snk_ma = 3000,
- .max_snk_mw = 27000,
+ .max_snk_mw = 15000,
.operating_snk_mw = 2500,
.type = TYPEC_PORT_DRP,
.default_role = TYPEC_SINK,
--
2.9.4