[PATCH v2 09/14] power: supply: bq24190_charger: Export 5V boost converter as regulator

[Hans de Goede]

Register the 5V boost converter as a regulator named "usb_otg_vbus".

This commit also adds support for bq24190_platform_data, through which
non device-tree platforms can pass the regulator_init_data (containing
mappings for the consumer amongst other things).

Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
Changes in v2:
-Use "usb_otg_vbus" as default name for the regulator
-Add support for passing regulator_init_data for non device-tree platforms
-Register the regulator later, to avoid it showing up and shortly later
 disappearing again on probe errors (e.g. -EPROBE_DEFER).
---
 drivers/power/supply/bq24190_charger.c | 126 +++++++++++++++++++++++++++++++++
 include/linux/power/bq24190_charger.h  |  18 +++++
 2 files changed, 144 insertions(+)
 create mode 100644 include/linux/power/bq24190_charger.h

diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
index d5a707e..073cd9d 100644
--- a/drivers/power/supply/bq24190_charger.c
+++ b/drivers/power/supply/bq24190_charger.c
@@ -16,6 +16,9 @@
 #include <linux/of_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/power_supply.h>
+#include <linux/power/bq24190_charger.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
 #include <linux/workqueue.h>
 #include <linux/gpio.h>
 #include <linux/i2c.h>
@@ -504,6 +507,125 @@ static int bq24190_sysfs_create_group(struct bq24190_dev_info *bdi)
 static inline void bq24190_sysfs_remove_group(struct bq24190_dev_info *bdi) {}
 #endif
 
+#ifdef CONFIG_REGULATOR
+static int bq24190_vbus_enable(struct regulator_dev *dev)
+{
+	struct bq24190_dev_info *bdi = rdev_get_drvdata(dev);
+	int ret;
+
+	ret = pm_runtime_get_sync(bdi->dev);
+	if (ret < 0) {
+		dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", ret);
+		pm_runtime_put_noidle(bdi->dev);
+		return ret;
+	}
+
+	ret = bq24190_write_mask(bdi, BQ24190_REG_POC,
+				 BQ24190_REG_POC_CHG_CONFIG_MASK,
+				 BQ24190_REG_POC_CHG_CONFIG_SHIFT,
+				 BQ24190_REG_POC_CHG_CONFIG_OTG);
+
+	pm_runtime_mark_last_busy(bdi->dev);
+	pm_runtime_put_autosuspend(bdi->dev);
+
+	return ret;
+}
+
+static int bq24190_vbus_disable(struct regulator_dev *dev)
+{
+	struct bq24190_dev_info *bdi = rdev_get_drvdata(dev);
+	int ret;
+
+	ret = pm_runtime_get_sync(bdi->dev);
+	if (ret < 0) {
+		dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", ret);
+		pm_runtime_put_noidle(bdi->dev);
+		return ret;
+	}
+
+	ret = bq24190_write_mask(bdi, BQ24190_REG_POC,
+				 BQ24190_REG_POC_CHG_CONFIG_MASK,
+				 BQ24190_REG_POC_CHG_CONFIG_SHIFT,
+				 BQ24190_REG_POC_CHG_CONFIG_CHARGE);
+
+	pm_runtime_mark_last_busy(bdi->dev);
+	pm_runtime_put_autosuspend(bdi->dev);
+
+	return ret;
+}
+
+static int bq24190_vbus_is_enabled(struct regulator_dev *dev)
+{
+	struct bq24190_dev_info *bdi = rdev_get_drvdata(dev);
+	int ret;
+	u8 val;
+
+	ret = pm_runtime_get_sync(bdi->dev);
+	if (ret < 0) {
+		dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", ret);
+		pm_runtime_put_noidle(bdi->dev);
+		return ret;
+	}
+
+	ret = bq24190_read_mask(bdi, BQ24190_REG_POC,
+				BQ24190_REG_POC_CHG_CONFIG_MASK,
+				BQ24190_REG_POC_CHG_CONFIG_SHIFT, &val);
+
+	pm_runtime_mark_last_busy(bdi->dev);
+	pm_runtime_put_autosuspend(bdi->dev);
+
+	return ret ? ret : val == BQ24190_REG_POC_CHG_CONFIG_OTG;
+}
+
+static const struct regulator_ops bq24190_vbus_ops = {
+	.enable = bq24190_vbus_enable,
+	.disable = bq24190_vbus_disable,
+	.is_enabled = bq24190_vbus_is_enabled,
+};
+
+static const struct regulator_desc bq24190_vbus_desc = {
+	.name = "usb_otg_vbus",
+	.type = REGULATOR_VOLTAGE,
+	.owner = THIS_MODULE,
+	.ops = &bq24190_vbus_ops,
+	.fixed_uV = 5000000,
+	.n_voltages = 1,
+};
+
+static const struct regulator_init_data bq24190_vbus_init_data = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static int bq24190_register_vbus_regulator(struct bq24190_dev_info *bdi)
+{
+	struct bq24190_platform_data *pdata = bdi->dev->platform_data;
+	struct regulator_config cfg = { };
+	struct regulator_dev *reg;
+	int ret = 0;
+
+	cfg.dev = bdi->dev;
+	if (pdata && pdata->regulator_init_data)
+		cfg.init_data = pdata->regulator_init_data;
+	else
+		cfg.init_data = &bq24190_vbus_init_data;
+	cfg.driver_data = bdi;
+	reg = devm_regulator_register(bdi->dev, &bq24190_vbus_desc, &cfg);
+	if (IS_ERR(reg)) {
+		ret = PTR_ERR(reg);
+		dev_err(bdi->dev, "Can't register regulator: %d\n", ret);
+	}
+
+	return ret;
+}
+#else
+static int bq24190_register_vbus_regulator(struct bq24190_dev_info *bdi)
+{
+	return 0;
+}
+#endif
+
 /*
  * According to the "Host Mode and default Mode" section of the
  * manual, a write to any register causes the bq24190 to switch
@@ -1577,6 +1699,10 @@ static int bq24190_probe(struct i2c_client *client,
 		goto out_sysfs;
 	}
 
+	ret = bq24190_register_vbus_regulator(bdi);
+	if (ret < 0)
+		goto out_sysfs;
+
 	if (bdi->extcon) {
 		INIT_DELAYED_WORK(&bdi->extcon_work, bq24190_extcon_work);
 		bdi->extcon_nb.notifier_call = bq24190_extcon_event;
diff --git a/include/linux/power/bq24190_charger.h b/include/linux/power/bq24190_charger.h
new file mode 100644
index 0000000..45ce7f1
--- /dev/null
+++ b/include/linux/power/bq24190_charger.h
@@ -0,0 +1,18 @@
+/*
+ * Platform data for the TI bq24190 battery charger driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _BQ24190_CHARGER_H_
+#define _BQ24190_CHARGER_H_
+
+#include <linux/regulator/machine.h>
+
+struct bq24190_platform_data {
+	const struct regulator_init_data *regulator_init_data;
+};
+
+#endif
-- 
2.9.4