[PATCH v2 11/14] power: supply: bq24190_charger: Get input_current_limit from our supplier

[Hans de Goede]

On some devices the USB Type-C port power (USB PD 2.0) negotiation is
done by a separate port-controller IC, while the current limit is
controlled through another (charger) IC.

It has been decided to model this by modelling the external Type-C
power brick (adapter/charger) as a power-supply class device which
supplies the charger-IC, with its voltage-now and current-max representing
the negotiated voltage and max current draw.

This commit adds support for this to the bq24190_charger driver by calling
power_supply_set_input_current_limit_from_supplier helper if the
"input-current-limit-from-supplier" device-property is set.

Note this replaces the functionality to get the current-limit from an
extcon device, which will be removed in a follow-up commit.

Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
Changes in v2:
-Wait a bit before applying current-max from our supplier as input-current-limit
 the bq24190 may still be in its power-good wait-state while our supplier is
 done negotating current-max and if we apply the limit to early then the
 input-current-limit will be reset to 0.5A by the bq24190 after its
 power-good wait is done.
---
 drivers/power/supply/bq24190_charger.c | 35 ++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
index f13f892..6f75c8e 100644
--- a/drivers/power/supply/bq24190_charger.c
+++ b/drivers/power/supply/bq24190_charger.c
@@ -159,9 +159,11 @@ struct bq24190_dev_info {
 	struct extcon_dev		*extcon;
 	struct notifier_block		extcon_nb;
 	struct delayed_work		extcon_work;
+	struct delayed_work		input_current_limit_work;
 	char				model_name[I2C_NAME_SIZE];
 	bool				initialized;
 	bool				irq_event;
+	bool				input_current_limit_from_supplier;
 	struct mutex			f_reg_lock;
 	u8				f_reg;
 	u8				ss_reg;
@@ -1142,6 +1144,32 @@ static int bq24190_charger_property_is_writeable(struct power_supply *psy,
 	return ret;
 }
 
+static void bq24190_input_current_limit_work(struct work_struct *work)
+{
+	struct bq24190_dev_info *bdi =
+		container_of(work, struct bq24190_dev_info,
+			     input_current_limit_work.work);
+
+	power_supply_set_input_current_limit_from_supplier(bdi->charger);
+}
+
+static void bq24190_charger_external_power_changed(struct power_supply *psy)
+{
+	struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
+
+	/*
+	 * The Power-Good detection may take up to 220ms, sometimes
+	 * the external charger detection is quicker, and the bq24190 will
+	 * reset to iinlim based on its own charger detection (which is not
+	 * hooked up when using external charger detection) resulting in a
+	 * too low default 500mA iinlim. Delay setting the input-current-limit
+	 * for 300ms to avoid this.
+	 */
+	if (bdi->input_current_limit_from_supplier)
+		queue_delayed_work(system_wq, &bdi->input_current_limit_work,
+				   msecs_to_jiffies(300));
+}
+
 static enum power_supply_property bq24190_charger_properties[] = {
 	POWER_SUPPLY_PROP_CHARGE_TYPE,
 	POWER_SUPPLY_PROP_HEALTH,
@@ -1170,6 +1198,7 @@ static const struct power_supply_desc bq24190_charger_desc = {
 	.get_property		= bq24190_charger_get_property,
 	.set_property		= bq24190_charger_set_property,
 	.property_is_writeable	= bq24190_charger_property_is_writeable,
+	.external_power_changed	= bq24190_charger_external_power_changed,
 };
 
 /* Battery power supply property routines */
@@ -1651,6 +1680,8 @@ static int bq24190_probe(struct i2c_client *client,
 	mutex_init(&bdi->f_reg_lock);
 	bdi->f_reg = 0;
 	bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */
+	INIT_DELAYED_WORK(&bdi->input_current_limit_work,
+			  bq24190_input_current_limit_work);
 
 	i2c_set_clientdata(client, bdi);
 
@@ -1659,6 +1690,10 @@ static int bq24190_probe(struct i2c_client *client,
 		return -EINVAL;
 	}
 
+	bdi->input_current_limit_from_supplier =
+		device_property_read_bool(dev,
+					  "input-current-limit-from-supplier");
+
 	/*
 	 * Devicetree platforms should get extcon via phandle (not yet supported).
 	 * On ACPI platforms, extcon clients may invoke us with:
-- 
2.9.4