[PATCH 2/2] staging: typec: tcpm: explicit_contract is always established

[Badhri Jagan Sridharan]

While in SNK_READY state, the explicit_contract seems to be
set to true irrespective of whether an explicit contract
was established for the current connection. TCPM also seems
to report the pwr_opmode as TYPEC_PWR_MODE_PD always once
the port gets into SNK_READY state. This isn't completely
true as port gets into the SNK_READY state for non-pd
type-c ports as well.

This patch sets the explicit_contract flag only when
the PS_READY message is received and the vbus has been
detected by the port controller.

Signed-off-by: Badhri Jagan Sridharan <Badhri@xxxxxxxxxx>
---
 drivers/staging/typec/tcpm.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/typec/tcpm.c b/drivers/staging/typec/tcpm.c
index a24e6bbb909c..3e12cf101311 100644
--- a/drivers/staging/typec/tcpm.c
+++ b/drivers/staging/typec/tcpm.c
@@ -1367,6 +1367,7 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port,
 				tcpm_set_current_limit(port,
 						       port->current_limit,
 						       port->supply_voltage);
+				port->explicit_contract = true;
 				tcpm_set_state(port, SNK_READY, 0);
 			} else {
 				/*
@@ -2458,10 +2459,11 @@ static void run_state_machine(struct tcpm_port *port)
 		break;
 	case SNK_READY:
 		port->try_snk_count = 0;
-		port->explicit_contract = true;
-		typec_set_pwr_opmode(port->typec_port, TYPEC_PWR_MODE_PD);
-		port->pwr_opmode = TYPEC_PWR_MODE_PD;
-
+		if (port->explicit_contract) {
+			typec_set_pwr_opmode(port->typec_port,
+					     TYPEC_PWR_MODE_PD);
+			port->pwr_opmode = TYPEC_PWR_MODE_PD;
+		}
 		tcpm_typec_connect(port);
 
 		tcpm_check_send_discover(port);
@@ -2951,6 +2953,7 @@ static void _tcpm_pd_vbus_on(struct tcpm_port *port)
 	port->vbus_present = true;
 	switch (port->state) {
 	case SNK_TRANSITION_SINK_VBUS:
+		port->explicit_contract = true;
 		tcpm_set_state(port, SNK_READY, 0);
 		break;
 	case SNK_DISCOVERY:
-- 
2.14.1.480.gb18f417b89-goog