[PATCH v6 1/5] drm/vc4: Move the DSI clock divider workaround closer to the clock call.

[Eric Anholt]

We want the adjusted_mode->clock to be the actual clock we're
expecting to program, so that consumers see the right values for clock
and vrefresh.

Signed-off-by: Eric Anholt <eric@xxxxxxxxxx>
---
 drivers/gpu/drm/vc4/vc4_dsi.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
index d1e0dc908048..eb787eed8abe 100644
--- a/drivers/gpu/drm/vc4/vc4_dsi.c
+++ b/drivers/gpu/drm/vc4/vc4_dsi.c
@@ -859,11 +859,7 @@ static bool vc4_dsi_encoder_mode_fixup(struct drm_encoder *encoder,
 	pll_clock = parent_rate / divider;
 	pixel_clock_hz = pll_clock / dsi->divider;
 
-	/* Round up the clk_set_rate() request slightly, since
-	 * PLLD_DSI1 is an integer divider and its rate selection will
-	 * never round up.
-	 */
-	adjusted_mode->clock = pixel_clock_hz / 1000 + 1;
+	adjusted_mode->clock = pixel_clock_hz / 1000;
 
 	/* Given the new pixel clock, adjust HFP to keep vrefresh the same. */
 	adjusted_mode->htotal = pixel_clock_hz / (mode->vrefresh * mode->vtotal);
@@ -900,7 +896,11 @@ static void vc4_dsi_encoder_enable(struct drm_encoder *encoder)
 		vc4_dsi_dump_regs(dsi);
 	}
 
-	phy_clock = pixel_clock_hz * dsi->divider;
+	/* Round up the clk_set_rate() request slightly, since
+	 * PLLD_DSI1 is an integer divider and its rate selection will
+	 * never round up.
+	 */
+	phy_clock = (pixel_clock_hz + 1000) * dsi->divider;
 	ret = clk_set_rate(dsi->pll_phy_clock, phy_clock);
 	if (ret) {
 		dev_err(&dsi->pdev->dev,
-- 
2.14.1