Re: WARNING: CPU: 15 PID: 0 at block/blk-mq.c:1111 __blk_mq_run_hw_queue+0x1d8/0x1f0

[Brian King]

On 08/16/2017 01:15 PM, Bart Van Assche wrote:
> On Wed, 2017-08-16 at 23:37 +0530, Abdul Haleem wrote:
>> Linux-next booted with the below warnings on powerpc
>>
>> [ ... ]
>>
>> boot warnings:
>> --------------
>> kvm: exiting hardware virtualization
>> ------------[ cut here ]------------
>> WARNING: CPU: 15 PID: 0 at block/blk-mq.c:1111 __blk_mq_run_hw_queue
>> +0x1d8/0x1f0
>> Modules linked in: iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4
>> Call Trace:
>> [c000000ffff37990] [c00000000088f7b0] __blk_mq_delay_run_hw_queue
>> +0x1f0/0x210
>> [c000000ffff379d0] [c00000000088fcb8] blk_mq_start_hw_queue+0x58/0x80
>> [c000000ffff379f0] [c00000000088fd40] blk_mq_start_hw_queues+0x60/0xb0
>> [c000000ffff37a30] [c000000000ae2b54] scsi_kick_queue+0x34/0xa0
>> [c000000ffff37a50] [c000000000ae2f70] scsi_run_queue+0x3b0/0x660
>> [c000000ffff37ac0] [c000000000ae7ed4] scsi_run_host_queues+0x64/0xc0
>> [c000000ffff37b00] [c000000000ae7f64] scsi_unblock_requests+0x34/0x60
>> [c000000ffff37b20] [c000000000b14998] ipr_ioa_bringdown_done+0xf8/0x3a0
>> [c000000ffff37bc0] [c000000000b12528] ipr_reset_ioa_job+0xd8/0x170
>> [c000000ffff37c00] [c000000000b18790] ipr_reset_timer_done+0x110/0x160
>> [c000000ffff37c50] [c00000000024db50] call_timer_fn+0xa0/0x3a0
>> [c000000ffff37ce0] [c00000000024e058] expire_timers+0x1b8/0x350
>> [c000000ffff37d50] [c00000000024e2f0] run_timer_softirq+0x100/0x3e0
>> [c000000ffff37df0] [c000000000162edc] __do_softirq+0x20c/0x620
>> [c000000ffff37ee0] [c000000000163a80] irq_exit+0x230/0x290
>> [c000000ffff37f10] [c00000000001d770] __do_irq+0x170/0x410
>> [c000000ffff37f90] [c00000000003ea20] call_do_irq+0x14/0x24
>> [c0000007f84e3a70] [c00000000001dae0] do_IRQ+0xd0/0x190
>> [c0000007f84e3ac0] [c000000000008c58] hardware_interrupt_common
>> +0x158/0x160
> 
> Hello Brian,
> 
> In the MAINTAINERS file I found the following:
> 
> IBM Power Linux RAID adapter
> M:      Brian King <brking@xxxxxxxxxx>
> S:      Supported
> F:      drivers/scsi/ipr.*
> 
> Is that information up-to-date? Do you agree that the above message indicates
> a bug in the ipr driver?

Yes. Can you try with this patch that is in 4.13/scsi-fixes:

https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git/commit/?h=4.13/scsi-fixes&id=b0e17a9b0df29590c45dfb296f541270a5941f41

Thanks,

Brian

-- 
Brian King
Power Linux I/O
IBM Linux Technology Center