Re: Linux 3.18.66

From: Greg KH
Date: Wed Aug 16 2017 - 16:59:37 EST

Next message: David Miller: "Re: [PATCH net RESEND] PCI: fix oops when try to find Root Port for a PCI device"
Previous message: Greg KH: "Linux 3.18.66"
In reply to: Greg KH: "Linux 3.18.66"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

diff --git a/Makefile b/Makefile
index 3979e65d516e..32c25e43e43c 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
VERSION = 3
PATCHLEVEL = 18
-SUBLEVEL = 65
+SUBLEVEL = 66
EXTRAVERSION =
NAME = Diseased Newt

diff --git a/drivers/iio/adc/vf610_adc.c b/drivers/iio/adc/vf610_adc.c
index 38e60860165d..5306d8e81f26 100644
--- a/drivers/iio/adc/vf610_adc.c
+++ b/drivers/iio/adc/vf610_adc.c
@@ -71,7 +71,7 @@
#define VF610_ADC_ADSTS_MASK 0x300
#define VF610_ADC_ADLPC_EN 0x80
#define VF610_ADC_ADHSC_EN 0x400
-#define VF610_ADC_REFSEL_VALT 0x100
+#define VF610_ADC_REFSEL_VALT 0x800
#define VF610_ADC_REFSEL_VBG 0x1000
#define VF610_ADC_ADTRG_HARD 0x2000
#define VF610_ADC_AVGS_8 0x4000
diff --git a/drivers/iio/light/tsl2563.c b/drivers/iio/light/tsl2563.c
index 94daa9fc1247..6a135effb7c5 100644
--- a/drivers/iio/light/tsl2563.c
+++ b/drivers/iio/light/tsl2563.c
@@ -626,7 +626,7 @@ static irqreturn_t tsl2563_event_handler(int irq, void *private)
struct tsl2563_chip *chip = iio_priv(dev_info);

iio_push_event(dev_info,
- IIO_UNMOD_EVENT_CODE(IIO_LIGHT,
+ IIO_UNMOD_EVENT_CODE(IIO_INTENSITY,
0,
IIO_EV_TYPE_THRESH,
IIO_EV_DIR_EITHER),
diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.c b/drivers/pinctrl/samsung/pinctrl-exynos.c
index d7154ed0b0eb..d064a588fdb0 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos.c
@@ -200,8 +200,6 @@ static int exynos_irq_request_resources(struct irq_data *irqd)

spin_unlock_irqrestore(&bank->slock, flags);

- exynos_irq_unmask(irqd);
-
return 0;
}

@@ -222,8 +220,6 @@ static void exynos_irq_release_resources(struct irq_data *irqd)
shift = irqd->hwirq * bank_type->fld_width[PINCFG_TYPE_FUNC];
mask = (1 << bank_type->fld_width[PINCFG_TYPE_FUNC]) - 1;

- exynos_irq_mask(irqd);
-
spin_lock_irqsave(&bank->slock, flags);

con = readl(d->virt_base + reg_con);
diff --git a/drivers/pinctrl/sunxi/pinctrl-sun4i-a10.c b/drivers/pinctrl/sunxi/pinctrl-sun4i-a10.c
index 86b608bedca6..a30d1cdacf5b 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun4i-a10.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun4i-a10.c
@@ -800,6 +800,7 @@ static const struct sunxi_desc_pin sun4i_a10_pins[] = {
SUNXI_FUNCTION(0x2, "lcd1"), /* D16 */
SUNXI_FUNCTION(0x3, "pata"), /* ATAD12 */
SUNXI_FUNCTION(0x4, "keypad"), /* IN6 */
+ SUNXI_FUNCTION(0x5, "sim"), /* DET */
SUNXI_FUNCTION_IRQ(0x6, 16), /* EINT16 */
SUNXI_FUNCTION(0x7, "csi1")), /* D16 */
SUNXI_PIN(SUNXI_PINCTRL_PIN(H, 17),
diff --git a/drivers/staging/iio/resolver/ad2s1210.c b/drivers/staging/iio/resolver/ad2s1210.c
index b4c14ba5fdee..d125f282a807 100644
--- a/drivers/staging/iio/resolver/ad2s1210.c
+++ b/drivers/staging/iio/resolver/ad2s1210.c
@@ -466,7 +466,7 @@ static int ad2s1210_read_raw(struct iio_dev *indio_dev,
long m)
{
struct ad2s1210_state *st = iio_priv(indio_dev);
- bool negative;
+ u16 negative;
int ret = 0;
u16 pos;
s16 vel;
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 58a444f243cc..826b8fb9eb59 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2398,6 +2398,8 @@ void usb_hc_died (struct usb_hcd *hcd)
}
if (usb_hcd_is_primary_hcd(hcd) && hcd->shared_hcd) {
hcd = hcd->shared_hcd;
+ clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
+ set_bit(HCD_FLAG_DEAD, &hcd->flags);
if (hcd->rh_registered) {
clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index d2c941b03302..32d904ea494c 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -4623,7 +4623,8 @@ hub_power_remaining (struct usb_hub *hub)
static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
u16 portchange)
{
- int status, i;
+ int status = -ENODEV;
+ int i;
unsigned unit_load;
struct usb_device *hdev = hub->hdev;
struct usb_hcd *hcd = bus_to_hcd(hdev->bus);
@@ -4823,9 +4824,10 @@ loop:

done:
hub_port_disable(hub, port1, 1);
- if (hcd->driver->relinquish_port && !hub->hdev->parent)
- hcd->driver->relinquish_port(hcd, port1);
-
+ if (hcd->driver->relinquish_port && !hub->hdev->parent) {
+ if (status != -ENOTCONN && status != -ENODEV)
+ hcd->driver->relinquish_port(hcd, port1);
+ }
}

/* Handle physical or logical connection change events.
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 32a8eb968d39..217b8d58926a 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -143,6 +143,9 @@ static const struct usb_device_id usb_quirk_list[] = {
/* appletouch */
{ USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME },

+ /* Genesys Logic hub, internally used by Moshi USB to Ethernet Adapter */
+ { USB_DEVICE(0x05e3, 0x0616), .driver_info = USB_QUIRK_NO_LPM },
+
/* Avision AV600U */
{ USB_DEVICE(0x0638, 0x0a13), .driver_info =
USB_QUIRK_STRING_FETCH_255 },
@@ -242,6 +245,7 @@ static const struct usb_device_id usb_amd_resume_quirk_list[] = {
{ USB_DEVICE(0x093a, 0x2500), .driver_info = USB_QUIRK_RESET_RESUME },
{ USB_DEVICE(0x093a, 0x2510), .driver_info = USB_QUIRK_RESET_RESUME },
{ USB_DEVICE(0x093a, 0x2521), .driver_info = USB_QUIRK_RESET_RESUME },
+ { USB_DEVICE(0x03f0, 0x2b4a), .driver_info = USB_QUIRK_RESET_RESUME },

/* Logitech Optical Mouse M90/M100 */
{ USB_DEVICE(0x046d, 0xc05a), .driver_info = USB_QUIRK_RESET_RESUME },
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index f4e6b945136c..ba166f574136 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -89,6 +89,7 @@ enum amd_chipset_gen {
AMD_CHIPSET_HUDSON2,
AMD_CHIPSET_BOLTON,
AMD_CHIPSET_YANGTZE,
+ AMD_CHIPSET_TAISHAN,
AMD_CHIPSET_UNKNOWN,
};

@@ -132,6 +133,11 @@ static int amd_chipset_sb_type_init(struct amd_chipset_info *pinfo)
pinfo->sb_type.gen = AMD_CHIPSET_SB700;
else if (rev >= 0x40 && rev <= 0x4f)
pinfo->sb_type.gen = AMD_CHIPSET_SB800;
+ }
+ pinfo->smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+ 0x145c, NULL);
+ if (pinfo->smbus_dev) {
+ pinfo->sb_type.gen = AMD_CHIPSET_TAISHAN;
} else {
pinfo->smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
PCI_DEVICE_ID_AMD_HUDSON2_SMBUS, NULL);
@@ -253,11 +259,12 @@ int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev)
{
/* Make sure amd chipset type has already been initialized */
usb_amd_find_chipset_info();
- if (amd_chipset.sb_type.gen != AMD_CHIPSET_YANGTZE)
- return 0;
-
- dev_dbg(&pdev->dev, "QUIRK: Enable AMD remote wakeup fix\n");
- return 1;
+ if (amd_chipset.sb_type.gen == AMD_CHIPSET_YANGTZE ||
+ amd_chipset.sb_type.gen == AMD_CHIPSET_TAISHAN) {
+ dev_dbg(&pdev->dev, "QUIRK: Enable AMD remote wakeup fix\n");
+ return 1;
+ }
+ return 0;
}
EXPORT_SYMBOL_GPL(usb_hcd_amd_remote_wakeup_quirk);

diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 7da914bc2094..33223e4b53c6 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1294,6 +1294,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
| MUSB_TXCSR_TXPKTRDY);
}
return;
+ mdelay(1);
}

done:
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 0263280c7102..a8051aad885c 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -133,6 +133,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */
{ USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */
{ USB_DEVICE(0x10C4, 0x8A5E) }, /* CEL EM3588 ZigBee USB Stick Long Range */
+ { USB_DEVICE(0x10C4, 0x8B34) }, /* Qivicon ZigBee USB Radio Stick */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index ebbfdc7a39cb..08d92d5d1be7 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2020,6 +2020,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d04, 0xff) }, /* D-Link DWM-158 */
{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e19, 0xff), /* D-Link DWM-221 B1 */
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+ { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e35, 0xff), /* D-Link DWM-222 */
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/A3 */
diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
index eb87c44663b1..32c84be6af60 100644
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -113,9 +113,9 @@ UNUSUAL_DEV(0x0bc2, 0xab2a, 0x0000, 0x9999,
/* Reported-by: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx> */
UNUSUAL_DEV(0x13fd, 0x3940, 0x0000, 0x9999,
"Initio Corporation",
- "",
+ "INIC-3069",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
- US_FL_NO_ATA_1X),
+ US_FL_NO_ATA_1X | US_FL_IGNORE_RESIDUE),

/* Reported-by: Tom Arild Naess <tanaess@xxxxxxxxx> */
UNUSUAL_DEV(0x152d, 0x0539, 0x0000, 0x9999,
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 52717269a5ac..1f8cca580f50 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -54,7 +54,7 @@ struct fuse_file *fuse_file_alloc(struct fuse_conn *fc)
{
struct fuse_file *ff;

- ff = kmalloc(sizeof(struct fuse_file), GFP_KERNEL);
+ ff = kzalloc(sizeof(struct fuse_file), GFP_KERNEL);
if (unlikely(!ff))
return NULL;

diff --git a/fs/nfs/Kconfig b/fs/nfs/Kconfig
index 3dece03f2fc8..c219b0d9300a 100644
--- a/fs/nfs/Kconfig
+++ b/fs/nfs/Kconfig
@@ -121,6 +121,7 @@ config PNFS_FILE_LAYOUT
config PNFS_BLOCK
tristate
depends on NFS_V4_1 && BLK_DEV_DM
+ depends on 64BIT || LBDAF
default NFS_V4

config PNFS_OBJLAYOUT
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 7a8d1b808efc..47ede9d8ddc2 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -6424,7 +6424,7 @@ int alloc_contig_range(unsigned long start, unsigned long end,

/* Make sure the range is really isolated. */
if (test_pages_isolated(outer_start, end, false)) {
- pr_info("%s: [%lx, %lx) PFNs busy\n",
+ pr_info_ratelimited("%s: [%lx, %lx) PFNs busy\n",
__func__, outer_start, end);
ret = -EBUSY;
goto done;

Next message: David Miller: "Re: [PATCH net RESEND] PCI: fix oops when try to find Root Port for a PCI device"
Previous message: Greg KH: "Linux 3.18.66"
In reply to: Greg KH: "Linux 3.18.66"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]