[PATCH v4] pinctrl: aspeed: Fix ast2500 strap register write logic
From: Yong Li
Date: Thu Aug 17 2017 - 18:53:33 EST
On AST2500, the hardware strap register(SCU70) only accepts write â1â,
to clear it to â0â, must set bits(write â1â) to SCU7C
Signed-off-by: Yong Li <sdliyong@xxxxxxxxx>
---
drivers/pinctrl/aspeed/pinctrl-aspeed.c | 21 +++++++++++++++++++++
drivers/pinctrl/aspeed/pinctrl-aspeed.h | 1 +
2 files changed, 22 insertions(+)
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.c b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
index a86a4d6..7f13ce8 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.c
@@ -213,6 +213,27 @@ static int aspeed_sig_expr_set(const struct aspeed_sig_expr *expr,
if (desc->ip == ASPEED_IP_SCU && desc->reg == HW_STRAP2)
continue;
+ /* On AST2500, Set bits in SCU7C are cleared from SCU70 */
+ if (desc->ip == ASPEED_IP_SCU && desc->reg == HW_STRAP1) {
+ unsigned int rev_id;
+
+ ret = regmap_read(maps[ASPEED_IP_SCU],
+ HW_REVISION_ID, &rev_id);
+ if (ret < 0)
+ return ret;
+
+ if (0x04 == (rev_id >> 24)) {
+ u32 value = ~val & desc->mask;
+
+ if (value) {
+ ret = regmap_write(maps[desc->ip],
+ HW_REVISION_ID, value);
+ if (ret < 0)
+ return ret;
+ }
+ }
+ }
+
ret = regmap_update_bits(maps[desc->ip], desc->reg,
desc->mask, val);
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.h b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
index fa125db..d4d7f03 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed.h
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.h
@@ -251,6 +251,7 @@
#define SCU3C 0x3C /* System Reset Control/Status Register */
#define SCU48 0x48 /* MAC Interface Clock Delay Setting */
#define HW_STRAP1 0x70 /* AST2400 strapping is 33 bits, is split */
+#define HW_REVISION_ID 0x7C /* Silicon revision ID register */
#define SCU80 0x80 /* Multi-function Pin Control #1 */
#define SCU84 0x84 /* Multi-function Pin Control #2 */
#define SCU88 0x88 /* Multi-function Pin Control #3 */
--
2.7.4