[PATCH v3 3/4] dt-bindings: PCI: rockchip: Add support for pcie wake irq
From: Jeffy Chen
Date: Fri Aug 18 2017 - 04:29:43 EST
Add an optional interrupt for PCIE_WAKE pin.
Signed-off-by: Jeffy Chen <jeffy.chen@xxxxxxxxxxxxxx>
---
Changes in v3: None
Changes in v2: None
.../devicetree/bindings/pci/rockchip-pcie.txt | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt
index 1453a734c2f5..edd779f842fa 100644
--- a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt
@@ -22,10 +22,13 @@ Required properties:
- phys: From PHY bindings: Phandle for the Generic PHY for PCIe.
- phy-names: MUST be "pcie-phy".
- interrupts: Three interrupt entries must be specified.
-- interrupt-names: Must include the following names
- - "sys"
- - "legacy"
- - "client"
+- interrupt-names: Include the following names
+ Required:
+ - "sys"
+ - "legacy"
+ - "client"
+ Optional:
+ - "wake"
- resets: Must contain seven entries for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following names
@@ -76,10 +79,11 @@ pcie0: pcie@f8000000 {
clock-names = "aclk", "aclk-perf",
"hclk", "pm";
bus-range = <0x0 0x1>;
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "sys", "legacy", "client";
+ interrupts-extended = <&gic GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
+ <&gic GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
+ <&gic GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>,
+ <&gpio0 8 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "sys", "legacy", "client", "wake";
assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
assigned-clock-rates = <100000000>;
--
2.11.0