[PATCH 3.16 021/134] pinctrl: sh-pfc: r8a7791: Add missing DVC_MUTE signal
From: Ben Hutchings
Date: Fri Aug 18 2017 - 09:59:58 EST
3.16.47-rc1 review patch. If anyone has any objections, please let me know.
------------------
From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
commit 3908632fb829d73317c64c3d04f584b49f62e4ae upstream.
The R8A7791 PFC driver was apparently based on the preliminary revisions
of the user's manual, which omitted the DVC_MUTE signal altogether in
the PFC section. The modern manual has the signal described, so just add
the necassary data to the driver...
Fixes: 508845196238 ("pinctrl: sh-pfc: r8a7791 PFC support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
[bwh: Backported to 3.16:
- Use PINMUX_IPSR_DATA() instead of PINMUX_IPSR_GPSR()
- Adjust context]
Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
---
drivers/pinctrl/sh-pfc/pfc-r8a7791.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
@@ -192,7 +192,7 @@ enum {
/* IPSR6 */
FN_AUDIO_CLKB, FN_STP_OPWM_0_B, FN_MSIOF1_SCK_B,
- FN_SCIF_CLK, FN_BPFCLK_E,
+ FN_SCIF_CLK, FN_DVC_MUTE, FN_BPFCLK_E,
FN_AUDIO_CLKC, FN_SCIFB0_SCK_C, FN_MSIOF1_SYNC_B, FN_RX2,
FN_SCIFA2_RXD, FN_FMIN_E,
FN_AUDIO_CLKOUT, FN_MSIOF1_SS1_B, FN_TX2, FN_SCIFA2_TXD,
@@ -562,7 +562,7 @@ enum {
/* IPSR6 */
AUDIO_CLKB_MARK, STP_OPWM_0_B_MARK, MSIOF1_SCK_B_MARK,
- SCIF_CLK_MARK, BPFCLK_E_MARK,
+ SCIF_CLK_MARK, DVC_MUTE_MARK, BPFCLK_E_MARK,
AUDIO_CLKC_MARK, SCIFB0_SCK_C_MARK, MSIOF1_SYNC_B_MARK, RX2_MARK,
SCIFA2_RXD_MARK, FMIN_E_MARK,
AUDIO_CLKOUT_MARK, MSIOF1_SS1_B_MARK, TX2_MARK, SCIFA2_TXD_MARK,
@@ -1082,6 +1082,7 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_MODSEL_DATA(IP6_2_0, STP_OPWM_0_B, SEL_SSP_1),
PINMUX_IPSR_MODSEL_DATA(IP6_2_0, MSIOF1_SCK_B, SEL_SOF1_1),
PINMUX_IPSR_MODSEL_DATA(IP6_2_0, SCIF_CLK, SEL_SCIF_0),
+ PINMUX_IPSR_DATA(IP6_2_0, DVC_MUTE),
PINMUX_IPSR_MODSEL_DATA(IP6_2_0, BPFCLK_E, SEL_FM_4),
PINMUX_IPSR_DATA(IP6_5_3, AUDIO_CLKC),
PINMUX_IPSR_MODSEL_DATA(IP6_5_3, SCIFB0_SCK_C, SEL_SCIFB_2),
@@ -5148,7 +5149,7 @@ static const struct pinmux_cfg_reg pinmu
0, 0,
/* IP6_2_0 [3] */
FN_AUDIO_CLKB, FN_STP_OPWM_0_B, FN_MSIOF1_SCK_B,
- FN_SCIF_CLK, 0, FN_BPFCLK_E,
+ FN_SCIF_CLK, FN_DVC_MUTE, FN_BPFCLK_E,
0, 0, }
},
{ PINMUX_CFG_REG_VAR("IPSR7", 0xE606003C, 32,