[PATCH v3 net 2/2 RESEND] net: ixgbe: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag
From: Ding Tianhong
Date: Sun Aug 20 2017 - 06:11:42 EST
The ixgbe driver use the compile check to determine if it can
send TLPs to Root Port with the Relaxed Ordering Attribute set,
this is too inconvenient, now the new flag PCI_DEV_FLAGS_NO_RELAXED_ORDERING
has been added to the kernel and we could check the bit4 in the PCIe
Device Control register to determine whether we should use the Relaxed
Ordering Attributes or not, so use this new way in the ixgbe driver.
Signed-off-by: Ding Tianhong <dingtianhong@xxxxxxxxxx>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c | 22 ----------------------
drivers/net/ethernet/intel/ixgbe/ixgbe_common.c | 19 -------------------
2 files changed, 41 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
index 523f9d0..8a32eb7 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
@@ -175,31 +175,9 @@ static s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw)
**/
static s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
{
-#ifndef CONFIG_SPARC
- u32 regval;
- u32 i;
-#endif
s32 ret_val;
ret_val = ixgbe_start_hw_generic(hw);
-
-#ifndef CONFIG_SPARC
- /* Disable relaxed ordering */
- for (i = 0; ((i < hw->mac.max_tx_queues) &&
- (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
- regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i));
- regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
- IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval);
- }
-
- for (i = 0; ((i < hw->mac.max_rx_queues) &&
- (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
- regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
- regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN |
- IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
- IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
- }
-#endif
if (ret_val)
return ret_val;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index d4933d2..96c324f 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -350,25 +350,6 @@ s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw)
}
IXGBE_WRITE_FLUSH(hw);
-#ifndef CONFIG_SPARC
- /* Disable relaxed ordering */
- for (i = 0; i < hw->mac.max_tx_queues; i++) {
- u32 regval;
-
- regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i));
- regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
- IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval);
- }
-
- for (i = 0; i < hw->mac.max_rx_queues; i++) {
- u32 regval;
-
- regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
- regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN |
- IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
- IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
- }
-#endif
return 0;
}
--
1.8.3.1