Re: [PATCH] mfd: Add support for TI LMP92001

From: Lee Jones
Date: Tue Aug 22 2017 - 03:36:56 EST


On Tue, 22 Aug 2017, s.abhisit@xxxxxxxxx wrote:

> From: Abhisit Sangjan <s.abhisit@xxxxxxxxx>
>
> TI LMP92001 Analog System Monitor and Controller
>
> 8-bit GPIOs.
> 12 DACs with 12-bit resolution.
> The GPIOs and DACs are shared port function with Cy function pin to
> take control the pin suddenly from external hardware.
> DAC's referance voltage selectable for Internal/External.
>
> 16 + 1 ADCs with 12-bit resolution.
> Built-in internal Temperature Sensor on channel 17.
> Windows Comparator Function is supported on channel 1-3 and 9-11 for
> monitoring with interrupt signal (pending to implement for interrupt).
> ADC's referance voltage selectable for Internal/External.
>
> Signed-off-by: Abhisit Sangjan <s.abhisit@xxxxxxxxx>
> ---
> Documentation/ABI/testing/sysfs-bus-iio-lmp920001 | 92 ++++
> .../devicetree/bindings/gpio/gpio-lmp92001.txt | 22 +
> .../bindings/iio/adc/ti-lmp92001-adc.txt | 21 +
> .../bindings/iio/dac/ti-lmp92001-dac.txt | 35 ++
> drivers/gpio/Kconfig | 7 +
> drivers/gpio/Makefile | 1 +
> drivers/gpio/gpio-lmp92001.c | 209 +++++++++
> drivers/iio/adc/Kconfig | 10 +
> drivers/iio/adc/Makefile | 1 +
> drivers/iio/adc/lmp92001-adc.c | 500 +++++++++++++++++++++
> drivers/iio/dac/Kconfig | 9 +
> drivers/iio/dac/Makefile | 1 +
> drivers/iio/dac/lmp92001-dac.c | 390 ++++++++++++++++
> drivers/mfd/Kconfig | 12 +
> drivers/mfd/Makefile | 4 +
> drivers/mfd/lmp92001-core.c | 308 +++++++++++++
> drivers/mfd/lmp92001-debug.c | 67 +++
> drivers/mfd/lmp92001-i2c.c | 215 +++++++++
> include/linux/mfd/lmp92001/core.h | 119 +++++
> include/linux/mfd/lmp92001/debug.h | 28 ++

You need to split this up into a patch-set containing smaller
bite-sized patches. Each should contain the smallest (reasonable)
change set, split up by subsystem and again by functionality.

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog