Re: çå: [PATCH v3] mfd: Add support for RTS5250S power saving
From: Lee Jones
Date: Tue Aug 22 2017 - 06:30:59 EST
You have dropped the Mailing List off.
Please don't do that.
On Tue, 22 Aug 2017, åé wrote:
> Dear Jones:
>
> > +struct rtsx_cr_option {
> > + u32 dev_flags;
> > + bool force_clkreq_0;
> > + bool ltr_en;
> > + bool ltr_enabled;
> > + bool ltr_active;
> > + u32 ltr_active_latency;
> > + u32 ltr_idle_latency;
> > + u32 ltr_l1off_latency;
> > + enum dev_aspm_mode dev_aspm_mode;
> > + u32 l1_snooze_delay;
> > + u8 ltr_l1off_sspwrgate;
> > + u8 ltr_l1off_snooze_sspwrgate;
> > +};
>
> This still needs a kerneldoc header.
You need to sort out your email client.
This line should have been quoted.
> Do you mean adding comment for each member of the struct?
Kerneldoc format looks like this:
/**
* struct ccp_aes_engine - CCP AES operation
* @type: AES operation key size
* @mode: AES operation mode
* @action: AES operation (decrypt/encrypt)
* @key: key to be used for this AES operation
* @key_len: length in bytes of key
* @iv: IV to be used for this AES operation
* @iv_len: length in bytes of iv
* @src: data to be used for this operation
* @dst: data produced by this operation
* @src_len: length in bytes of data used for this operation
* @cmac_final: indicates final operation when running in CMAC mode
* @cmac_key: K1/K2 key used in final CMAC operation
* @cmac_key_len: length in bytes of cmac_key
*/
> > + if (val & PCI_EXP_DEVCTL2_LTR_EN) {
> > + option->ltr_enabled = true;
> > + option->ltr_active = true;
> > + rtsx_set_ltr_latency(pcr, option->ltr_active_latency);
> > + } else {
> > + option->ltr_enabled = false;
> > + }
>
> No need for single line statements to be in {}'s.
>
> But according to the coding-style.rst, the {} is necessary.
>
> This does not apply if only one branch of a conditional statement is a single
> statement; in the latter case use braces in both branches:
>
> .. code-block:: c
>
> if (condition) {
> do_this();
> do_that();
> } else {
> otherwise();
> }
Ah, I thought that was only for Zepher
Never mind then. Keep that as it is.
> -----éäåä-----
> åää: Lee Jones [mailto:lee.jones@xxxxxxxxxx]
> åéæé: 2017å8æ22æ 15:33
> æää: åé
> æé: linux-kernel@xxxxxxxxxxxxxxx
> äé: Re: [PATCH v3] mfd: Add support for RTS5250S power saving
Ah, I see what you've done.
Please just respond in line in future.
Also, these headers should be removed.
> On Tue, 22 Aug 2017, rui_feng@xxxxxxxxxxxxxx wrote:
>
> > From: Rui Feng <rui_feng@xxxxxxxxxxxxxx>
> >
> > Signed-off-by: Rui Feng <rui_feng@xxxxxxxxxxxxxx>
> > ---
> > drivers/mfd/rts5249.c | 195 ++++++++++++++++++++++++++++++++++++++++
> > drivers/mfd/rtsx_pcr.c | 205 +++++++++++++++++++++++++++++++++++++++++--
> > drivers/mfd/rtsx_pcr.h | 11 +++
> > include/linux/mfd/rtsx_pci.h | 60 +++++++++++++
> > 4 files changed, 466 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c index
> > 40f8bb1..3959ada 100644
> > --- a/drivers/mfd/rts5249.c
> > +++ b/drivers/mfd/rts5249.c
> > @@ -103,8 +103,72 @@ static void rtsx_base_force_power_down(struct rtsx_pcr *pcr, u8 pm_state)
> > rtsx_pci_write_register(pcr, FPDCTL, 0x03, 0x03); }
> >
> > +static int rts5249_init_from_cfg(struct rtsx_pcr *pcr) {
> > + struct rtsx_cr_option *option = &(pcr->option);
> > + u32 lval;
> > +
> > + if (CHK_PCI_PID(pcr, PID_524A))
> > + rtsx_pci_read_config_dword(pcr,
> > + PCR_ASPM_SETTING_REG1, &lval);
> > + else
> > + rtsx_pci_read_config_dword(pcr,
> > + PCR_ASPM_SETTING_REG2, &lval);
> > +
> > + if (lval & ASPM_L1_1_EN_MASK)
> > + rtsx_set_dev_flag(pcr, ASPM_L1_1_EN);
> > + else
> > + rtsx_clear_dev_flag(pcr, ASPM_L1_1_EN);
>
> '\n' here.
>
> > + if (lval & ASPM_L1_2_EN_MASK)
> > + rtsx_set_dev_flag(pcr, ASPM_L1_2_EN);
> > + else
> > + rtsx_clear_dev_flag(pcr, ASPM_L1_2_EN);
>
> Why don't you ensure all flags are already clear? That way you can drop all of the clear flag calls and only set them when you know they are available.
>
> > + if (lval & PM_L1_1_EN_MASK)
> > + rtsx_set_dev_flag(pcr, PM_L1_1_EN);
> > + else
> > + rtsx_clear_dev_flag(pcr, PM_L1_1_EN);
>
> '\n' here.
>
> > + if (lval & PM_L1_2_EN_MASK)
> > + rtsx_set_dev_flag(pcr, PM_L1_2_EN);
> > + else
> > + rtsx_clear_dev_flag(pcr, PM_L1_2_EN);
> > +
> > + if (option->ltr_en) {
> > + u16 val;
> > +
> > + pcie_capability_read_word(pcr->pci, PCI_EXP_DEVCTL2, &val);
> > + if (val & PCI_EXP_DEVCTL2_LTR_EN) {
> > + option->ltr_enabled = true;
> > + option->ltr_active = true;
> > + rtsx_set_ltr_latency(pcr, option->ltr_active_latency);
> > + } else {
> > + option->ltr_enabled = false;
> > + }
>
> No need for single line statements to be in {}'s.
>
> > + }
> > +
> > + return 0;
>
> Why does this function return int?
>
> You don't even check the return value.
>
> > +}
> > +
> > +static int rts5249_init_from_hw(struct rtsx_pcr *pcr) {
> > + struct rtsx_cr_option *option = &(pcr->option);
> > +
> > + if (rtsx_check_dev_flag(pcr, ASPM_L1_1_EN | ASPM_L1_2_EN
> > + | PM_L1_1_EN | PM_L1_2_EN))
> > + option->force_clkreq_0 = false;
> > + else
> > + option->force_clkreq_0 = true;
> > +
> > + return 0;
> > +}
> > +
> > static int rts5249_extra_init_hw(struct rtsx_pcr *pcr) {
> > + struct rtsx_cr_option *option = &(pcr->option);
> > +
> > + rts5249_init_from_cfg(pcr);
> > + rts5249_init_from_hw(pcr);
> > +
> > rtsx_pci_init_cmd(pcr);
> >
> > /* Rest L1SUB Config */
> > @@ -125,6 +189,17 @@ static int rts5249_extra_init_hw(struct rtsx_pcr *pcr)
> > else
> > rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0xB0, 0x80);
> >
> > + /*
> > + * u_force_clkreq_0
> > + * If true, CLKREQ# PIN will be forced to drive low to request clock
> > + */
>
> "If u_force_clkreq_0 is enabled, we forcibly request the XXX clock."
>
> > + if (option->force_clkreq_0)
> > + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG,
> > + FORCE_CLKREQ_DELINK_MASK, FORCE_CLKREQ_LOW);
> > + else
> > + rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG,
> > + FORCE_CLKREQ_DELINK_MASK, FORCE_CLKREQ_HIGH);
> > +
> > return rtsx_pci_send_cmd(pcr, 100);
> > }
> >
> > @@ -353,6 +428,8 @@ static int rtsx_base_switch_output_voltage(struct
> > rtsx_pcr *pcr, u8 voltage)
> >
> > void rts5249_init_params(struct rtsx_pcr *pcr) {
> > + struct rtsx_cr_option *option = &(pcr->option);
> > +
> > pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104;
> > pcr->num_slots = 2;
> > pcr->ops = &rts5249_pcr_ops;
> > @@ -372,6 +449,20 @@ void rts5249_init_params(struct rtsx_pcr *pcr)
> > pcr->ms_pull_ctl_disable_tbl = rts5249_ms_pull_ctl_disable_tbl;
> >
> > pcr->reg_pm_ctrl3 = PM_CTRL3;
> > +
> > + option->dev_flags |= (LTR_L1SS_PWR_GATE_CHECK_CARD_EN
> > + | LTR_L1SS_PWR_GATE_EN);
> > + option->ltr_en = true;
> > +
> > + /* init latency of active, idle, L1OFF to 60us, 300us, 3ms */
> > + option->ltr_active_latency = LTR_ACTIVE_LATENCY_DEFAULT;
> > + option->ltr_idle_latency = LTR_IDLE_LATENCY_DEFAULT;
> > + option->ltr_l1off_latency = LTR_L1OFF_LATENCY_DEFAULT;
> > + option->dev_aspm_mode = DEV_ASPM_DYNAMIC;
> > + option->l1_snooze_delay = 1;
>
> 1 what?
>
> > + option->ltr_l1off_sspwrgate = LTR_L1OFF_SSPWRGATE_5249_DEFAULT;
> > + option->ltr_l1off_snooze_sspwrgate =
> > + LTR_L1OFF_SNOOZE_SSPWRGATE_5249_DEFAULT;
> > }
> >
> > static int rts524a_write_phy(struct rtsx_pcr *pcr, u8 addr, u16 val)
> > @@ -459,6 +550,54 @@ static int rts524a_extra_init_hw(struct rtsx_pcr *pcr)
> > return 0;
> > }
> >
> > +static void rts5250_set_l1off_cfg_sub_d0(struct rtsx_pcr *pcr, int
> > +active) {
> > + struct rtsx_cr_option *option = &(pcr->option);
> > +
> > + u32 interrupt = rtsx_pci_readl(pcr, RTSX_BIPR);
> > + int card_exist = (interrupt & SD_EXIST) | (interrupt & MS_EXIST);
> > + int aspm_L1_1, aspm_L1_2;
> > +
> > + aspm_L1_1 = rtsx_check_dev_flag(pcr, ASPM_L1_1_EN);
> > + aspm_L1_2 = rtsx_check_dev_flag(pcr, ASPM_L1_2_EN);
> > +
> > + if (active) {
> > + /* run, latency: 60us */
> > + if (aspm_L1_1) {
> > + u8 val = option->ltr_l1off_snooze_sspwrgate;
> > +
> > + if (rtsx_check_dev_flag(pcr,
> > + LTR_L1SS_PWR_GATE_CHECK_CARD_EN)) {
> > + if (card_exist)
> > + val &= ~(1 << 7);
> > + else
> > + val |= (1 << 7);
>
> These need defining.
>
> > + }
> > +
> > + rtsx_set_l1off_sub(pcr, val);
> > + } else {
> > + rtsx_set_l1off_sub(pcr, 0);
> > + }
> > + } else {
> > + /* l1off, latency: 300us */
> > + if (aspm_L1_2) {
> > + u8 val = option->ltr_l1off_sspwrgate;
> > +
> > + if (rtsx_check_dev_flag(pcr,
> > + LTR_L1SS_PWR_GATE_CHECK_CARD_EN)) {
> > + if (card_exist)
> > + val &= ~(1 << 7);
> > + else
> > + val |= (1 << 7);
> > + }
> > +
> > + rtsx_set_l1off_sub(pcr, val);
> > + } else {
> > + rtsx_set_l1off_sub(pcr, 0);
> > + }
> > + }
> > +}
> > +
> > static const struct pcr_ops rts524a_pcr_ops = {
> > .write_phy = rts524a_write_phy,
> > .read_phy = rts524a_read_phy,
> > @@ -473,11 +612,15 @@ static int rts524a_extra_init_hw(struct rtsx_pcr *pcr)
> > .card_power_off = rtsx_base_card_power_off,
> > .switch_output_voltage = rtsx_base_switch_output_voltage,
> > .force_power_down = rtsx_base_force_power_down,
> > + .set_l1off_cfg_sub_d0 = rts5250_set_l1off_cfg_sub_d0,
> > };
> >
> > void rts524a_init_params(struct rtsx_pcr *pcr) {
> > rts5249_init_params(pcr);
> > + pcr->option.ltr_l1off_sspwrgate = LTR_L1OFF_SSPWRGATE_5250_DEFAULT;
> > + pcr->option.ltr_l1off_snooze_sspwrgate =
> > + LTR_L1OFF_SNOOZE_SSPWRGATE_5250_DEFAULT;
> >
> > pcr->reg_pm_ctrl3 = RTS524A_PM_CTRL3;
> > pcr->ops = &rts524a_pcr_ops;
> > @@ -564,6 +707,52 @@ static int rts525a_extra_init_hw(struct rtsx_pcr *pcr)
> > return 0;
> > }
> >
> > +static void rts5249_enable_aspm(struct rtsx_pcr *pcr) {
> > + struct rtsx_cr_option *option = &pcr->option;
> > +
> > + if (pcr->aspm_enabled)
> > + return;
> > +
> > + if (option->dev_aspm_mode == DEV_ASPM_DISABLE) {
> > + pcr->aspm_enabled = true;
> > + return;
> > + }
>
> '\n' here.
>
> > + if (option->dev_aspm_mode == DEV_ASPM_DYNAMIC) {
> > + rtsx_pci_update_cfg_byte(pcr,
> > + pcr->pcie_cap + PCI_EXP_LNKCTL,
> > + 0xFC, pcr->aspm_en);
> > + } else if (option->dev_aspm_mode == DEV_ASPM_BACKDOOR) {
> > + u8 mask = FORCE_ASPM_VAL_MASK | FORCE_ASPM_CTL0;
> > +
> > + rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, mask, 0);
> > + }
> > + pcr->aspm_enabled = true;
>
> Place this above the:
>
> if (option->dev_aspm_mode == DEV_ASPM_DISABLE)
>
> .. line. Then you can remove the duplicate.
>
> > +}
> > +
> > +static void rts5249_disable_aspm(struct rtsx_pcr *pcr) {
> > + struct rtsx_cr_option *option = &pcr->option;
> > +
> > + if (!pcr->aspm_enabled)
> > + return;
>
> '\n' here.
>
> > + if (option->dev_aspm_mode == DEV_ASPM_DISABLE) {
> > + pcr->aspm_enabled = false;
> > + return;
> > + }
> > + if (option->dev_aspm_mode == DEV_ASPM_DYNAMIC) {
> > + rtsx_pci_update_cfg_byte(pcr,
> > + pcr->pcie_cap + PCI_EXP_LNKCTL,
> > + 0xFC, 0);
> > + } else if (option->dev_aspm_mode == DEV_ASPM_BACKDOOR) {
> > + u8 mask = FORCE_ASPM_VAL_MASK | FORCE_ASPM_CTL0;
> > +
> > + rtsx_pci_write_register(pcr, ASPM_FORCE_CTL,
> > + mask, FORCE_ASPM_CTL0);
> > + }
> > + pcr->aspm_enabled = false;
>
> Place this above the:
>
> if (option->dev_aspm_mode == DEV_ASPM_DISABLE)
>
> .. line. Then you can remove the duplicate.
>
> OR, better still. Since most of this code is the same as the function above, please amalgamate them and figure a way to get them to share code. Whether that's by using a function argument or something else.
>
> Since there are only 2 pieces of information that differ, I would create a child function which takes 3 arguments (pcr and the differences between the functions), which both enable_* and disable_* call.
>
> > +}
> > +
> > static const struct pcr_ops rts525a_pcr_ops = {
> > .fetch_vendor_settings = rtsx_base_fetch_vendor_settings,
> > .extra_init_hw = rts525a_extra_init_hw, @@ -576,11 +765,17 @@ static
> > int rts525a_extra_init_hw(struct rtsx_pcr *pcr)
> > .card_power_off = rtsx_base_card_power_off,
> > .switch_output_voltage = rts525a_switch_output_voltage,
> > .force_power_down = rtsx_base_force_power_down,
> > + .set_l1off_cfg_sub_d0 = rts5250_set_l1off_cfg_sub_d0,
> > + .enable_aspm = rts5249_enable_aspm,
> > + .disable_aspm = rts5249_disable_aspm,
> > };
> >
> > void rts525a_init_params(struct rtsx_pcr *pcr) {
> > rts5249_init_params(pcr);
> > + pcr->option.ltr_l1off_sspwrgate = LTR_L1OFF_SSPWRGATE_5250_DEFAULT;
> > + pcr->option.ltr_l1off_snooze_sspwrgate =
> > + LTR_L1OFF_SNOOZE_SSPWRGATE_5250_DEFAULT;
> >
> > pcr->reg_pm_ctrl3 = RTS524A_PM_CTRL3;
> > pcr->ops = &rts525a_pcr_ops;
> > diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c index
> > a0ac89d..2ff398d 100644
> > --- a/drivers/mfd/rtsx_pcr.c
> > +++ b/drivers/mfd/rtsx_pcr.c
> > @@ -79,6 +79,142 @@ static inline void rtsx_pci_disable_aspm(struct rtsx_pcr *pcr)
> > 0xFC, 0);
> > }
> >
> > +int rtsx_comm_set_ltr_latency(struct rtsx_pcr *pcr, u32 latency) {
> > + rtsx_pci_write_register(pcr, MSGTXDATA0, 0xFF, (u8) (latency & 0xFF));
> > + rtsx_pci_write_register(pcr, MSGTXDATA1,
> > + 0xFF, (u8)((latency >> 8) & 0xFF));
>
> Define these.
>
> > + rtsx_pci_write_register(pcr, MSGTXDATA2,
> > + 0xFF, (u8)((latency >> 16) & 0xFF));
> > + rtsx_pci_write_register(pcr, MSGTXDATA3,
> > + 0xFF, (u8)((latency >> 24) & 0xFF));
> > + rtsx_pci_write_register(pcr, LTR_CTL, 0xC0, 0xC0);
> > +
> > + return 0;
> > +}
> > +
> > +int rtsx_set_ltr_latency(struct rtsx_pcr *pcr, u32 latency) {
> > + if (pcr->ops->set_ltr_latency)
> > + return pcr->ops->set_ltr_latency(pcr, latency);
> > + else
> > + return rtsx_comm_set_ltr_latency(pcr, latency);
> > +
> > + return 0;
>
> This code is unreachable.
>
> > +}
> > +
> > +static void rtsx_comm_disable_aspm(struct rtsx_pcr *pcr) {
> > + struct rtsx_cr_option *option = &pcr->option;
> > +
> > + if (!pcr->aspm_enabled)
> > + return;
>
> '\n' here.
>
> > + if (option->dev_aspm_mode == DEV_ASPM_DISABLE) {
> > + pcr->aspm_enabled = false;
> > + return;
> > + }
>
> '\n' here.
>
> > + if (option->dev_aspm_mode == DEV_ASPM_DYNAMIC) {
> > + rtsx_pci_disable_aspm(pcr);
> > + } else if (option->dev_aspm_mode == DEV_ASPM_BACKDOOR) {
> > + u8 mask = FORCE_ASPM_VAL_MASK;
> > +
> > + rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, mask, 0);
> > + }
>
> '\n' here.
>
> > + msleep(20);
> > + pcr->aspm_enabled = false;
> > +}
> > +
> > +static void rtsx_disable_aspm(struct rtsx_pcr *pcr) {
> > + if (pcr->ops->disable_aspm)
> > + pcr->ops->disable_aspm(pcr);
> > + else
> > + rtsx_comm_disable_aspm(pcr);
> > +}
> > +
> > +int rtsx_set_l1off_sub(struct rtsx_pcr *pcr, u8 val) {
> > + rtsx_pci_write_register(pcr, L1SUB_CONFIG3, 0xFF, val);
> > +
> > + return 0;
> > +}
> > +
> > +static void rtsx_comm_set_l1off_cfg_sub_d0(struct rtsx_pcr *pcr, int
> > +active) {
> > + struct rtsx_cr_option *option = &(pcr->option);
> > + u32 interrupt = rtsx_pci_readl(pcr, RTSX_BIPR);
> > + int card_exist = (interrupt & SD_EXIST) | (interrupt & MS_EXIST);
> > + int aspm_L1_1, aspm_L1_2;
> > +
> > + aspm_L1_1 = rtsx_check_dev_flag(pcr, ASPM_L1_1_EN);
> > + aspm_L1_2 = rtsx_check_dev_flag(pcr, ASPM_L1_2_EN);
> > +
> > + if (active) {
> > + /* run, latency: 60us */
> > + if (aspm_L1_1) {
> > + u8 val = option->ltr_l1off_snooze_sspwrgate;
> > +
> > + if (rtsx_check_dev_flag(pcr,
> > + LTR_L1SS_PWR_GATE_CHECK_CARD_EN)) {
> > + if (card_exist)
> > + val &= ~(1 << 4);
> > + else
> > + val |= (1 << 4);
>
> Define these.
>
> > + }
> > +
> > + rtsx_set_l1off_sub(pcr, val);
> > + } else {
> > + rtsx_set_l1off_sub(pcr, 0);
> > + }
> > + } else {
> > + /* l1off, latency: 300us */
> > + if (aspm_L1_2) {
> > + u8 val = option->ltr_l1off_sspwrgate;
> > +
> > + if (rtsx_check_dev_flag(pcr,
> > + LTR_L1SS_PWR_GATE_CHECK_CARD_EN)) {
> > + if (card_exist)
> > + val &= ~(1 << 4);
> > + else
> > + val |= (1 << 4);
> > + }
> > +
> > + rtsx_set_l1off_sub(pcr, val);
> > + } else {
> > + rtsx_set_l1off_sub(pcr, 0);
> > + }
> > + }
> > +}
>
> Again, there is a lot of duplication here. Any way these can be amalgamated?
>
> > +void rtsx_set_l1off_sub_cfg_d0(struct rtsx_pcr *pcr, int active) {
> > + if (pcr->ops->set_l1off_cfg_sub_d0)
> > + pcr->ops->set_l1off_cfg_sub_d0(pcr, active);
> > + else
> > + rtsx_comm_set_l1off_cfg_sub_d0(pcr, active); }
> > +
> > +static void rtsx_comm_pm_full_on(struct rtsx_pcr *pcr) {
> > + struct rtsx_cr_option *option = &pcr->option;
> > +
> > + rtsx_disable_aspm(pcr);
> > +
> > + if (option->ltr_enabled)
> > + rtsx_set_ltr_latency(pcr, option->ltr_active_latency);
> > +
> > + if (rtsx_check_dev_flag(pcr, LTR_L1SS_PWR_GATE_EN))
> > + rtsx_set_l1off_sub_cfg_d0(pcr, 1);
> > +}
> > +
> > +void rtsx_pm_full_on(struct rtsx_pcr *pcr) {
> > + if (pcr->ops->full_on)
> > + pcr->ops->full_on(pcr);
> > + else
> > + rtsx_comm_pm_full_on(pcr);
> > +}
> > +
> > void rtsx_pci_start_run(struct rtsx_pcr *pcr) {
> > /* If pci device removed, don't queue idle work any more */ @@ -89,9
> > +225,7 @@ void rtsx_pci_start_run(struct rtsx_pcr *pcr)
> > pcr->state = PDEV_STAT_RUN;
> > if (pcr->ops->enable_auto_blink)
> > pcr->ops->enable_auto_blink(pcr);
> > -
> > - if (pcr->aspm_en)
> > - rtsx_pci_disable_aspm(pcr);
> > + rtsx_pm_full_on(pcr);
> > }
> >
> > mod_delayed_work(system_wq, &pcr->idle_work, msecs_to_jiffies(200));
> > @@ -958,6 +1092,63 @@ static int rtsx_pci_acquire_irq(struct rtsx_pcr *pcr)
> > return 0;
> > }
> >
> > +static void rtsx_comm_enable_aspm(struct rtsx_pcr *pcr) {
> > + struct rtsx_cr_option *option = &pcr->option;
> > +
> > + if (pcr->aspm_enabled)
> > + return;
>
> '\n' here.
>
> > + if (option->dev_aspm_mode == DEV_ASPM_DISABLE) {
> > + pcr->aspm_enabled = true;
> > + return;
> > + }
> > +
> > + if (option->dev_aspm_mode == DEV_ASPM_DYNAMIC) {
> > + rtsx_pci_enable_aspm(pcr);
> > + } else if (option->dev_aspm_mode == DEV_ASPM_BACKDOOR) {
> > + u8 mask = FORCE_ASPM_VAL_MASK;
> > + u8 val = pcr->aspm_en;
> > +
> > + rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, mask, val);
> > + }
> > + pcr->aspm_enabled = true;
>
> Same comments as the code above that looks the same.
>
> > +}
> > +
> > +static void rtsx_enable_aspm(struct rtsx_pcr *pcr) {
> > + if (pcr->ops->enable_aspm)
> > + pcr->ops->enable_aspm(pcr);
> > + else
> > + rtsx_comm_enable_aspm(pcr);
> > +}
> > +
> > +static void rtsx_comm_pm_power_saving(struct rtsx_pcr *pcr) {
> > + struct rtsx_cr_option *option = &pcr->option;
> > +
> > + if (option->ltr_enabled) {
> > + u32 latency = option->ltr_l1off_latency;
> > +
> > + if (rtsx_check_dev_flag(pcr, L1_SNOOZE_TEST_EN))
> > + mdelay(option->l1_snooze_delay);
> > +
> > + rtsx_set_ltr_latency(pcr, latency);
> > + }
> > +
> > + if (rtsx_check_dev_flag(pcr, LTR_L1SS_PWR_GATE_EN))
> > + rtsx_set_l1off_sub_cfg_d0(pcr, 0);
> > +
> > + rtsx_enable_aspm(pcr);
> > +}
> > +
> > +void rtsx_pm_power_saving(struct rtsx_pcr *pcr) {
> > + if (pcr->ops->power_saving)
> > + pcr->ops->power_saving(pcr);
> > + else
> > + rtsx_comm_pm_power_saving(pcr);
> > +}
> > +
> > static void rtsx_pci_idle_work(struct work_struct *work) {
> > struct delayed_work *dwork = to_delayed_work(work); @@ -974,8
> > +1165,7 @@ static void rtsx_pci_idle_work(struct work_struct *work)
> > if (pcr->ops->turn_off_led)
> > pcr->ops->turn_off_led(pcr);
> >
> > - if (pcr->aspm_en)
> > - rtsx_pci_enable_aspm(pcr);
> > + rtsx_pm_power_saving(pcr);
> >
> > mutex_unlock(&pcr->pcr_mutex);
> > }
> > @@ -1063,6 +1253,11 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
> > if (err < 0)
> > return err;
> >
> > + if (CHK_PCI_PID(pcr, 0x5250) ||
> > + CHK_PCI_PID(pcr, 0x524A) ||
> > + CHK_PCI_PID(pcr, 0x525A))
> > + rtsx_pci_write_register(pcr, PM_CLK_FORCE_CTL, 1, 1);
>
> This should probably be a switch() statement with fall-through.
>
> > /* Enable clk_request_n to enable clock power management */
> > rtsx_pci_write_config_byte(pcr, pcr->pcie_cap + PCI_EXP_LNKCTL + 1, 1);
> > /* Enter L1 when host tx idle */
> > diff --git a/drivers/mfd/rtsx_pcr.h b/drivers/mfd/rtsx_pcr.h index
> > 931d1ae..d3baaec 100644
> > --- a/drivers/mfd/rtsx_pcr.h
> > +++ b/drivers/mfd/rtsx_pcr.h
> > @@ -32,6 +32,15 @@
> > #define RTS524A_PME_FORCE_CTL 0xFF78
> > #define RTS524A_PM_CTRL3 0xFF7E
> >
> > +#define LTR_ACTIVE_LATENCY_DEFAULT 0x883C
> > +#define LTR_IDLE_LATENCY_DEFAULT 0x892C
> > +#define LTR_L1OFF_LATENCY_DEFAULT 0x9003
> > +#define LTR_L1OFF_SSPWRGATE_5249_DEFAULT 0xAF
> > +#define LTR_L1OFF_SSPWRGATE_5250_DEFAULT 0xFF
> > +#define LTR_L1OFF_SNOOZE_SSPWRGATE_5249_DEFAULT 0xAC
> > +#define LTR_L1OFF_SNOOZE_SSPWRGATE_5250_DEFAULT 0xF8
> > +
> > +
> > int __rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16
> > val); int __rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr,
> > u16 *val);
> >
> > @@ -85,5 +94,7 @@ static inline u8 map_sd_drive(int idx)
> >
> > /* generic operations */
> > int rtsx_gops_pm_reset(struct rtsx_pcr *pcr);
> > +int rtsx_set_ltr_latency(struct rtsx_pcr *pcr, u32 latency); int
> > +rtsx_set_l1off_sub(struct rtsx_pcr *pcr, u8 val);
> >
> > #endif
> > diff --git a/include/linux/mfd/rtsx_pci.h
> > b/include/linux/mfd/rtsx_pci.h index 116816f..62b50e4 100644
> > --- a/include/linux/mfd/rtsx_pci.h
> > +++ b/include/linux/mfd/rtsx_pci.h
> > @@ -621,6 +621,9 @@
> >
> > #define AUTOLOAD_CFG_BASE 0xFF00
> > #define PETXCFG 0xFF03
> > +#define FORCE_CLKREQ_DELINK_MASK BIT(7)
> > +#define FORCE_CLKREQ_LOW 0x80
> > +#define FORCE_CLKREQ_HIGH 0x00
> >
> > #define PM_CTRL1 0xFF44
> > #define CD_RESUME_EN_MASK 0xF0
> > @@ -844,6 +847,9 @@
> > #define PHY_DIG1E_RX_EN_KEEP 0x0001
> > #define PHY_DUM_REG 0x1F
> >
> > +#define PCR_ASPM_SETTING_REG1 0x160
> > +#define PCR_ASPM_SETTING_REG2 0x168
> > +
> > #define PCR_SETTING_REG1 0x724
> > #define PCR_SETTING_REG2 0x814
> > #define PCR_SETTING_REG3 0x747
> > @@ -876,14 +882,65 @@ struct pcr_ops {
> > int (*conv_clk_and_div_n)(int clk, int dir);
> > void (*fetch_vendor_settings)(struct rtsx_pcr *pcr);
> > void (*force_power_down)(struct rtsx_pcr *pcr, u8 pm_state);
> > +
> > + void (*enable_aspm)(struct rtsx_pcr *pcr);
> > + void (*disable_aspm)(struct rtsx_pcr *pcr);
> > + int (*set_ltr_latency)(struct rtsx_pcr *pcr, u32 latency);
> > + int (*set_l1off_sub)(struct rtsx_pcr *pcr, u8 val);
> > + void (*set_l1off_cfg_sub_d0)(struct rtsx_pcr *pcr, int active);
> > + void (*full_on)(struct rtsx_pcr *pcr);
> > + void (*power_saving)(struct rtsx_pcr *pcr);
> > };
> >
> > enum PDEV_STAT {PDEV_STAT_IDLE, PDEV_STAT_RUN};
> >
> > +#define ASPM_L1_1_EN_MASK BIT(3)
> > +#define ASPM_L1_2_EN_MASK BIT(2)
> > +#define PM_L1_1_EN_MASK BIT(1)
> > +#define PM_L1_2_EN_MASK BIT(0)
> > +
> > +#define ASPM_L1_1_EN BIT(0)
> > +#define ASPM_L1_2_EN BIT(1)
> > +#define PM_L1_1_EN BIT(2)
> > +#define PM_L1_2_EN BIT(3)
> > +#define LTR_L1SS_PWR_GATE_EN BIT(4)
> > +#define L1_SNOOZE_TEST_EN BIT(5)
> > +#define LTR_L1SS_PWR_GATE_CHECK_CARD_EN BIT(6)
> > +
> > +enum dev_aspm_mode {
> > + DEV_ASPM_DISABLE = 0,
> > + DEV_ASPM_DYNAMIC,
> > + DEV_ASPM_BACKDOOR,
> > + DEV_ASPM_STATIC,
> > +};
> > +
> > +struct rtsx_cr_option {
> > + u32 dev_flags;
> > + bool force_clkreq_0;
> > + bool ltr_en;
> > + bool ltr_enabled;
> > + bool ltr_active;
> > + u32 ltr_active_latency;
> > + u32 ltr_idle_latency;
> > + u32 ltr_l1off_latency;
> > + enum dev_aspm_mode dev_aspm_mode;
> > + u32 l1_snooze_delay;
> > + u8 ltr_l1off_sspwrgate;
> > + u8 ltr_l1off_snooze_sspwrgate;
> > +};
>
> This still needs a kerneldoc header.
>
> > +#define rtsx_set_dev_flag(cr, flag) \
> > + ((cr)->option.dev_flags |= (flag))
> > +#define rtsx_clear_dev_flag(cr, flag) \
> > + ((cr)->option.dev_flags &= ~(flag))
> > +#define rtsx_check_dev_flag(cr, flag) \
> > + ((cr)->option.dev_flags & (flag))
> > +
> > struct rtsx_pcr {
> > struct pci_dev *pci;
> > unsigned int id;
> > int pcie_cap;
> > + struct rtsx_cr_option option;
> >
> > /* pci resources */
> > unsigned long addr;
> > @@ -940,6 +997,7 @@ struct rtsx_pcr {
> > u8 card_drive_sel;
> > #define ASPM_L1_EN 0x02
> > u8 aspm_en;
> > + bool aspm_enabled;
> >
> > #define PCR_MS_PMOS (1 << 0)
> > #define PCR_REVERSE_SOCKET (1 << 1)
> > @@ -964,6 +1022,8 @@ struct rtsx_pcr {
> > u8 dma_error_count;
> > };
> >
> > +#define PID_524A 0x524A
> > +
> > #define CHK_PCI_PID(pcr, pid) ((pcr)->pci->device == (pid))
> > #define PCI_VID(pcr) ((pcr)->pci->vendor)
> > #define PCI_PID(pcr) ((pcr)->pci->device)
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog