[PATCH 1/3] ARM: dts: sun7i: Fix A20-OLinuXino-MICRO dts for use with LAN8710
From: Stefan Mavrodiev
Date: Tue Aug 22 2017 - 07:54:19 EST
>From revision J the board uses new phy chip LAN8710. Compared
with RTL8201, RA17 pin is TXERR. It has pullup which causes phy
not to work. To fix this, PA17 must be configured output-low.
This patch is compatible with earlier board revisions, since this
pin wasn't connected to phy.
Signed-off-by: Stefan Mavrodiev <stefan@xxxxxxxxxx>
---
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index 0b7403e4d687..578c761b551a 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -102,7 +102,7 @@
&gmac {
pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_mii_a>;
+ pinctrl-0 = <&gmac_pins_mii_a>,<&gmac_txerr_pin>;
phy = <&phy1>;
phy-mode = "mii";
status = "okay";
@@ -229,6 +229,11 @@
};
&pio {
+ gmac_txerr_pin: gmac_txerr_pin@0 {
+ pins = "PA17";
+ function = "gpio_out"
+ };
+
mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
pins = "PH11";
function = "gpio_in";
--
2.11.0