Re: [PATCH 3/3] ACPI / PMIC: Add opregion driver for Intel Dollar Cove TI PMIC

[Takashi Iwai]

On Tue, 22 Aug 2017 14:08:27 +0200,
Andy Shevchenko wrote:
> 
> On Tue, 2017-08-22 at 14:37 +0300, Andy Shevchenko wrote:
> > On Tue, 2017-08-22 at 13:01 +0200, Takashi Iwai wrote:
> > > On Tue, 22 Aug 2017 12:25:12 +0200,
> > > Takashi Iwai wrote:
> 
> > > > > Does it mean the register is big endian?
> > > > 
> > > > Good point, I need to check the original code and the values.
> > > 
> > > It's really big-endian, the order is hi:lo.
> > > 
> > > But, admittedly, the temperature code hasn't been tested, and it's
> > > possibly missing something.ÂÂSo I'm fine to drop that part in the
> > > first version, too.
> > 
> > I don't know if regmap allows you to define registers with different
> > sizes for same chip, perhaps it would make sense to start register
> > from
> > hi part (and not doing non-intuitive "- 1", or maybe "+ 1" instead)
> > and
> > mark it in comment that is BE16.
> 
> I have just checked datasheet, so, there are 4 pairs of BE16 registers.Â
> 
> VBAT (Hi:Lo) 0x54
> DIETEMP 0x56
> BPTHERM 0x58
> GPADC 0x5a 
> 
> So, I would create a separate address mapping for them, dropping out
> that _LOW suffix and put a comment that they are BE16 since ADC has 10-
> bit resolution.

Yep, done in that way now.  Also I changed the register names to
follow your reference.

> Or even do a separate ADC driver under drivers/iio/adc for PMIC(s).

That's another option, but I took an easier path as the first step.


thanks,

Takashi