[GIT PULL] SCSI fixes for 4.13-rc6

From: James Bottomley
Date: Wed Aug 23 2017 - 02:42:51 EST

Next message: Christoph Hellwig: "Re: [PATCH] storvsc: do not assume SG list is continuous when doing bounce buffers (for 4.1 stable only)"
Previous message: Peter Meerwald-Stadler: "Re: [PATCH] iio: imu: inv_mpu6050: fix missing break in switch"
Next in thread: Bart Van Assche: "Re: [GIT PULL] SCSI fixes for 4.13-rc6"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Six minor and error leg fixes, plus one major change: the reversion of
scsi-mq as the default. ÂWe're doing the latter temporarily (with a
backport to stable) to give us time to fix all the issues that turned
up with this default before trying again.

The patch is available here:

git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes

The short changelog is:

Christoph Hellwig (1):
Revert "scsi: default to scsi-mq"

Damien Le Moal (1):
scsi: sd_zbc: Write unlock zone from sd_uninit_cmnd()

Raghava Aditya Renukunta (1):
scsi: aacraid: Fix out of bounds in aac_get_name_resp

Varun Prakash (2):
scsi: cxgb4i: call neigh_event_send() to update MAC address
scsi: csiostor: fail probe if fw does not support FCoE

weiping zhang (1):
scsi: megaraid_sas: fix error handle in megasas_probe_one

And the diffstat:

drivers/scsi/Kconfig | 11 +++++++++++
drivers/scsi/aacraid/aachba.c | 9 +++++++--
drivers/scsi/aacraid/aacraid.h | 2 +-
drivers/scsi/csiostor/csio_hw.c | 4 +++-
drivers/scsi/csiostor/csio_init.c | 12 ++++++++----
drivers/scsi/cxgbi/cxgb4i/cxgb4i.c | 3 +++
drivers/scsi/megaraid/megaraid_sas_base.c | 2 +-
drivers/scsi/scsi.c | 4 ++++
drivers/scsi/sd.c | 3 +++
drivers/scsi/sd_zbc.c | 9 +++++----
include/scsi/scsi_cmnd.h | 1 +
11 files changed, 47 insertions(+), 13 deletions(-)

With full diff below.

James

---

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index f4538d7a3016..d145e0d90227 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -47,6 +47,17 @@ config SCSI_NETLINK
default n
depends on NET

+config SCSI_MQ_DEFAULT
+ bool "SCSI: use blk-mq I/O path by default"
+ depends on SCSI
+ ---help---
+ This option enables the new blk-mq based I/O path for SCSI
+ devices by default. With the option the scsi_mod.use_blk_mq
+ module/boot option defaults to Y, without it to N, but it can
+ still be overridden either way.
+
+ If unsure say N.
+
config SCSI_PROC_FS
bool "legacy /proc/scsi/ support"
depends on SCSI && PROC_FS
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 4591113c49de..a1a2c71e1626 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -549,7 +549,9 @@ static void get_container_name_callback(void *context, struct fib * fibptr)
if ((le32_to_cpu(get_name_reply->status) == CT_OK)
&& (get_name_reply->data[0] != '\0')) {
char *sp = get_name_reply->data;
- sp[sizeof(((struct aac_get_name_resp *)NULL)->data)] = '\0';
+ int data_size = FIELD_SIZEOF(struct aac_get_name_resp, data);
+
+ sp[data_size - 1] = '\0';
while (*sp == ' ')
++sp;
if (*sp) {
@@ -579,12 +581,15 @@ static void get_container_name_callback(void *context, struct fib * fibptr)
static int aac_get_container_name(struct scsi_cmnd * scsicmd)
{
int status;
+ int data_size;
struct aac_get_name *dinfo;
struct fib * cmd_fibcontext;
struct aac_dev * dev;

dev = (struct aac_dev *)scsicmd->device->host->hostdata;

+ data_size = FIELD_SIZEOF(struct aac_get_name_resp, data);
+
cmd_fibcontext = aac_fib_alloc_tag(dev, scsicmd);

aac_fib_init(cmd_fibcontext);
@@ -593,7 +598,7 @@ static int aac_get_container_name(struct scsi_cmnd * scsicmd)
dinfo->command = cpu_to_le32(VM_ContainerConfig);
dinfo->type = cpu_to_le32(CT_READ_NAME);
dinfo->cid = cpu_to_le32(scmd_id(scsicmd));
- dinfo->count = cpu_to_le32(sizeof(((struct aac_get_name_resp *)NULL)->data));
+ dinfo->count = cpu_to_le32(data_size - 1);

status = aac_fib_send(ContainerCommand,
cmd_fibcontext,
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index d31a9bc2ba69..ee2667e20e42 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -2274,7 +2274,7 @@ struct aac_get_name_resp {
__le32 parm3;
__le32 parm4;
__le32 parm5;
- u8 data[16];
+ u8 data[17];
};

#define CT_CID_TO_32BITS_UID 165
diff --git a/drivers/scsi/csiostor/csio_hw.c b/drivers/scsi/csiostor/csio_hw.c
index 2029ad225121..5be0086142ca 100644
--- a/drivers/scsi/csiostor/csio_hw.c
+++ b/drivers/scsi/csiostor/csio_hw.c
@@ -3845,8 +3845,10 @@ csio_hw_start(struct csio_hw *hw)

if (csio_is_hw_ready(hw))
return 0;
- else
+ else if (csio_match_state(hw, csio_hws_uninit))
return -EINVAL;
+ else
+ return -ENODEV;
}

int
diff --git a/drivers/scsi/csiostor/csio_init.c b/drivers/scsi/csiostor/csio_init.c
index ea0c31086cc6..dcd074169aa9 100644
--- a/drivers/scsi/csiostor/csio_init.c
+++ b/drivers/scsi/csiostor/csio_init.c
@@ -969,10 +969,14 @@ static int csio_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)

pci_set_drvdata(pdev, hw);

- if (csio_hw_start(hw) != 0) {
- dev_err(&pdev->dev,
- "Failed to start FW, continuing in debug mode.\n");
- return 0;
+ rv = csio_hw_start(hw);
+ if (rv) {
+ if (rv == -EINVAL) {
+ dev_err(&pdev->dev,
+ "Failed to start FW, continuing in debug mode.\n");
+ return 0;
+ }
+ goto err_lnode_exit;
}

sprintf(hw->fwrev_str, "%u.%u.%u.%u\n",
diff --git a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
index a69a9ac836f5..1d02cf9fe06c 100644
--- a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
+++ b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
@@ -1635,6 +1635,9 @@ static int init_act_open(struct cxgbi_sock *csk)
goto rel_resource;
}

+ if (!(n->nud_state & NUD_VALID))
+ neigh_event_send(n, NULL);
+
csk->atid = cxgb4_alloc_atid(lldi->tids, csk);
if (csk->atid < 0) {
pr_err("%s, NO atid available.\n", ndev->name);
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 316c3df0c3fd..71c4746341ea 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -6228,8 +6228,8 @@ static int megasas_probe_one(struct pci_dev *pdev,
fail_start_aen:
fail_io_attach:
megasas_mgmt_info.count--;
- megasas_mgmt_info.instance[megasas_mgmt_info.max_index] = NULL;
megasas_mgmt_info.max_index--;
+ megasas_mgmt_info.instance[megasas_mgmt_info.max_index] = NULL;

instance->instancet->disable_intr(instance);
megasas_destroy_irqs(instance);
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 3d38c6d463b8..1bf274e3b2b6 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -800,7 +800,11 @@ MODULE_LICENSE("GPL");
module_param(scsi_logging_level, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(scsi_logging_level, "a bit mask of logging levels");

+#ifdef CONFIG_SCSI_MQ_DEFAULT
bool scsi_use_blk_mq = true;
+#else
+bool scsi_use_blk_mq = false;
+#endif
module_param_named(use_blk_mq, scsi_use_blk_mq, bool, S_IWUSR | S_IRUGO);

static int __init init_scsi(void)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index bea36adeee17..e2647f2d4430 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1277,6 +1277,9 @@ static void sd_uninit_command(struct scsi_cmnd *SCpnt)
{
struct request *rq = SCpnt->request;

+ if (SCpnt->flags & SCMD_ZONE_WRITE_LOCK)
+ sd_zbc_write_unlock_zone(SCpnt);
+
if (rq->rq_flags & RQF_SPECIAL_PAYLOAD)
__free_page(rq->special_vec.bv_page);

diff --git a/drivers/scsi/sd_zbc.c b/drivers/scsi/sd_zbc.c
index 96855df9f49d..8aa54779aac1 100644
--- a/drivers/scsi/sd_zbc.c
+++ b/drivers/scsi/sd_zbc.c
@@ -294,6 +294,9 @@ int sd_zbc_write_lock_zone(struct scsi_cmnd *cmd)
test_and_set_bit(zno, sdkp->zones_wlock))
return BLKPREP_DEFER;

+ WARN_ON_ONCE(cmd->flags & SCMD_ZONE_WRITE_LOCK);
+ cmd->flags |= SCMD_ZONE_WRITE_LOCK;
+
return BLKPREP_OK;
}

@@ -302,9 +305,10 @@ void sd_zbc_write_unlock_zone(struct scsi_cmnd *cmd)
struct request *rq = cmd->request;
struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);

- if (sdkp->zones_wlock) {
+ if (sdkp->zones_wlock && cmd->flags & SCMD_ZONE_WRITE_LOCK) {
unsigned int zno = sd_zbc_zone_no(sdkp, blk_rq_pos(rq));
WARN_ON_ONCE(!test_bit(zno, sdkp->zones_wlock));
+ cmd->flags &= ~SCMD_ZONE_WRITE_LOCK;
clear_bit_unlock(zno, sdkp->zones_wlock);
smp_mb__after_atomic();
}
@@ -335,9 +339,6 @@ void sd_zbc_complete(struct scsi_cmnd *cmd,
case REQ_OP_WRITE_ZEROES:
case REQ_OP_WRITE_SAME:

- /* Unlock the zone */
- sd_zbc_write_unlock_zone(cmd);
-
if (result &&
sshdr->sense_key == ILLEGAL_REQUEST &&
sshdr->asc == 0x21)
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index a1266d318c85..6af198d8120b 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -57,6 +57,7 @@ struct scsi_pointer {
/* for scmd->flags */
#define SCMD_TAGGED (1 << 0)
#define SCMD_UNCHECKED_ISA_DMA (1 << 1)
+#define SCMD_ZONE_WRITE_LOCK (1 << 2)

struct scsi_cmnd {
struct scsi_request req;

Next message: Christoph Hellwig: "Re: [PATCH] storvsc: do not assume SG list is continuous when doing bounce buffers (for 4.1 stable only)"
Previous message: Peter Meerwald-Stadler: "Re: [PATCH] iio: imu: inv_mpu6050: fix missing break in switch"
Next in thread: Bart Van Assche: "Re: [GIT PULL] SCSI fixes for 4.13-rc6"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]